Carryboy hardtop with side flaps and central locking WM(R)-MND

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

NOVISauto lashing clamps "CARGO CLEATS" - an ingeniously simple lashing system for your pickup loading box  -  installed in minutes ! the optimal alternative for backup  of your transported goods!  No drilling is required to attach the cleats anywhere on the top edge of the cargo box side walls. No damage to paint or sheet metal during installation and under load. The cleats are made of plastic-coated glass, so they are extremely durable and will not rust. Loads of up to around 200 kg are possible and can also be used for most of our luggage compartment covers. Additional CARGO CLEADS are required for larger loads:  always use more CARGO CLEATS to secure your cargo than necessary! - - Sold in pairs, information on attachment and application options, such as tips for knotting, for optimal loading is included. To note:  CARGO CLEATS cannot be used with load compartment tubs that are over the edge (overrail tubs) -  unless the tub is cut out at the relevant attachment points. CARGO CLEATS is not suitable for plastic-coated cargo boxes.    

NOVISauto - pre-compressed, permanently elastic joint sealing tape  for sealing the joint between the hard top or load compartment cover and the vehicle load box. Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover  glued on, previously trimmed a little at the ends.  Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps. A detailed assembly description is enclosed with the delivery.

NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene  

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber basis for Mitusbishi L200 / Fiat Fullback 2016+ for Mitsubishi L200 / Fiat Fullback 2016+ Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate

Rüsten Sie Ihren Pickup Truck verschiedener Marken Doppelkabine, Einzelkabine oder Extrakabine Baujahr(e) 2016-24 mit einer hochwertigen Motorhaubenöffner 106 von CARRYBOY aus. Mehr Komfort. Bessere Bedienung. Ihr Pickup – noch benutzerfreundlicher. Mit Zubehör aus der Rubrik Komfort & Benutzerfreundlichkeit. Motorhaubenöffner 106 erhöht die Benutzerfreundlichkeit Ihres Fahrzeugs und integriert sich reibungslos an Ihre Bedürfnisse. Im Lieferumfang enthalten sind ein maßgeschneidertes Montagekit und eine detaillierte Einbauanleitung. Zusätzlich unterstützen unsere anschaulichen YouTube-Videos eine einfache und reibungslose Installation. Und wenn’s doch mal hakt – unser erfahrenes Team ist jederzeit für Sie erreichbar. Auf Wunsch übernehmen unsere technisch versierten und erfahrenen Fachkräfte die fachgerechte Montage Ihres Zubehörs. Somit ist unser Zubehör Modell Motorhaubenöffner 106 das stärkste Model für Ihren Pickup Doppelkabine, Einzelkabine oder Extrakabine Baujahr 2016 - 2024. Unsere CARRYBOY Zubehör - Auf einen Blick - die gesamte Ausstattung: Kompatibilität: Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara, Toyota Hilux Doppelkabine (Doublecab), Einzelkabine (Singlecab), Extrakabine/1, 5-Kabine (Kingcab) Baujahr 2016 - 2024 Qualitätsprodukt: CARRYBOY Zubehör Anwendungsfall: Zubehör geeignet für Komfort & Benutzerfreundlichkeit Montageart: schrauben ungefähre Montagezeit: 15 min besonderes Merkmal: einfaches Öffnen und extrem kurze Einbauzeit besonderes geeignet für: bequeme Nutzung, einfache Anwendung und täglicher Gebrauch Befestigungsort: Motorhaube** Stauraum: ca. 0,5 m³ Unser Service an Sie - vor dem Kauf, als auch nach dem Kauf Unsere Dienste sind auf Ihre Anforderungen zugeschnitten. Ob vor oder nach dem Kauf – unser umfassender Service bietet Ihnen die Unterstützung, die Sie benötigen. Bei Fragen oder Zweifeln stehen wir Ihnen telefonisch oder via E-Mail zur Verfügung. Unser qualifiziertes Team steht Ihnen mit fundiertem Fachwissen, einer freundlichen Haltung und einem Service, der speziell auf Ihre Anforderungen abgestimmt ist, beratend zur Seite. Dank unserer mehr als 16-jährigen Praxiserfahrung gewährleisten wir Zuverlässigkeit. Unser fachkundiges Personal bietet Ihnen dank seiner umfassenden Expertise und langjährigen aktiv in der Branche erworbenen Erfahrungen stets erstklassigen Service. Praktisch. Durchdacht. Langlebig. Eine nachhaltige Produktgestaltung ist uns wichtig. Die Verwendung von hochwertigen Materialien, Rohstoffen und Teilen ermöglicht eine lange Lebens- und Nutzungsdauer unseres Zubehörs. Nachhaltigkeit wird durch eine lebenslange Nutzung und damit das Sparen von Ressourcen zur Neuherstellung erreicht. Mehr Komfort und erhöhte Benutzerfreundlichkeit durch CARRYBOY Motorhaubenöffner 106 Die Montage des Carryboy Motorhaubenöffner CB-106 erfolgt auf der Motorhaube. Die ungefähre Montagezeit beträgt 15 min auf Ihren Pickup Truck. Eine Montage mit schrauben ermöglicht eine bessere Standfestigkeit des Zubehörs. Durch schrauben sitzt das Zubehör besonders sicher an. Einfaches Öffnen und extrem kurze Einbauzeit: Das sind die besonderen Merkmale des Zubehörs. Zusammenfassend spiegeln die Punkte "Bequeme Nutzung, einfache Anwendung und täglicher Gebrauch" den Fall wieder, für welcher das Zubehör Motorhaubenöffner 106 von CARRYBOY für Ihren Pickup Truck Doppelkabine (Doublecab), Einzelkabine (Singlecab), Extrakabine/1 oder 5-Kabine (Kingcab) 2016 - 2024 besonders geeignet ist.

NOVISauto – B-Light / B-Light  is the ultra-bright lighting for your pick-up loading area made of 8 brightly lit LED units, each with 6 LED bulbs. B-Light fits all pickup trucks and models - B-Light brightly illuminates the entire cargo area of your pickup - There is only one switch for the whole light system. B light is suitable for all pickups with any cargo area covers or hardtop.  To protect against slipping loads, B-Light should be mounted under the U-rail on the side.

Saddlebag -  Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away  in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.   

The innovative Carryboy tailgate cable tailgate spring simplifies opening and closing the tailgate of your pick-up! The slingup helps you open and close the tailgate. The spring system dampens the downward movement of the tailgate. When closing the pickup tailgate of the Mitsubishi L200 / Fiat Fullback, this traction is used again. You will notice significant cushioning in both the up and down movement. The damping can be continuously adjusted as required. The slingup for the Mitsubishi L200 / Fiat Fullback is available for all vehicle lengths. The installation takes place without drilling and is also possible in combination with a load compartment tub. With the help of the assembly parts supplied, assembly is successfully completed in just a few minutes. The tailgate damper can be combined with a variety of other pickup accessories. If necessary, please inquire in advance.    

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

NOVISauto - bed mat model BedMat in universal size for all common and non-common pickup models (also for special editions, extended vehicles) The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area. The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush. The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping. The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas. It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery. Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ). universally applicable for all models Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.  

NOVISauto - SwingCase tool box for VW Amarok 2010-2020 Ultra-practical box for tools, sporting goods and many small parts You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing"  is more needed! NOVISauto, the market leader in selling popular Volkswagen Amarok accessories, builds these versatile storage boxes from impact-resistant ABS hard plastic for your convenience - strong enough for a long Amarok truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Volkswagen Amarok. - The purchase of two SwingCases for both sides of your VW Amarok platform wall is the best choice - space-saving, absolutely tight and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts!  SwingCase can be parked lying down or standing as usual. To save space, fix the SwingCase tool box to the side of the Volkswagen Amarok between the platform door and the wheel housing. SwingCase for your VW Amarok truck on the passenger side can be swung out , and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. This means that removing the VW Amarok is no longer possible. The tool box (tool box) and storage box is an essential VW Amarok accessory for every tradesman or hobby - do-it-yourselfers. The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Volkswagen Amarok pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.

Load compartment liner over edge for Mitsubishi L200 double cab 2015-2019 (only suitable without Adblue) dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform All-round edge protection from one piece included ideally suited for an exceptionally long service life stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects paintwork at low cost Only suitable for vehicles without Adblue! Accesories Tailgate protection with edge protection included assembly description with the necessary mounting accessories

Cargo area liner for Mitubishi L200 double cab 2015+/2019+ Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Optimum utilization of the loading area (directly adjacent to the side panel of the vehicle, therefore maximum loading width utilised) Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life including tailgate protection stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects the paintwork at low cost Made in the USA - no re-import from the Far East! Accesories Tailgate protection with edge protection included assembly description with the necessary mounting accessories  

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

NOVISauto - load compartment liner, non-slip model BedRug BRMD16 for Mitsubishi L200 and Fiat Fullback 2015+ double cab Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport Protection of the tailgate hinges from granular loads and dust from above - reduces wear   The innovative  and unique bedliner for your Mitsubishi L200 double cab pickup. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stress from gravel to battery acid.  

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material:   Materials from the outside:   Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays)   Material from inside:   190 g/sqm rip-stop polyester with PU 2000mm   Bottom material:          210 Denier Oxford Nylon with PU 2000mm Interior:   rust-free aluminum struts ensure structure and comfortable lying   6 cm foam mattress can be removed and cleaned    6 large windows with insect screens   2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size:   Unfolded & erected:           1,340 x 2,165 x 1,343mm   folded:             1,340 x 2,165 x 300mm   Weight:                               56 kg (together with ladder)    

Novisauto Pathfinder-1 roof tent The Novisauto roof tent for every pickup or at least mid-range SUV is one of the first innovative electrically controllable roof tents. You can straighten it up and down with a simple push of a button, alternatively you can also do it by hand. The tent is set up on the vehicle using clamps on cross members. Comfort : Self-erecting by remote control within 60 seconds Power supply via socket of the vehicle (3m cable) spacious interior with enough space for 2 people Reliable protection against wind and rain with extendable telescopic aluminum ladder - loadable up to 150kg with 6cm foam mattress. The cotton cover can be removed and washed. 2 extra hanging pockets for storing shoes, for example double fly screens in front of the windows and the entrance Tent size :   unfolded & erected (inside):      1,200(W) x 2,000(L) x 1,100(H) mm   Weight:                                       56 kg (together with ladder)   Material :   Material outside:   Oxford polyester with silver coating and UPF50+ *   Materials inside:   190 g/sqm ripstop polyester with 2000 mm water column   Bottom material:   210 Denier Oxford Nylon with 2000mm hydrostatic head Interior :   Stainless steel struts provide structure.   6 cm foam mattress can be removed with cover   6 windows with insect screen and privacy screen   2 additional shoe bags  

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame  for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p

The basic version of the Huckepack camping pickup structure combines everything you need to experience a short adventure. Drive to the North Sea for the weekend and listen to the sound of the waves. How about a 4 to 5 day short trip to the Black Forest and enjoy the peace and quiet while the forest and nature embrace you?  Our motto "Freedom on wheels" is our motto. Enjoy the opportunity to go anywhere. Even the basic version is generously equipped and covers all your basic needs so that nothing stands in the way of your trip. The structure can be packed and unpacked quickly and easily - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!

CARRYBOY - load compartment cover  Model SFB-Fullbox-MNDF for Fiat Fullback Double Cab 2016 -2020 Fullbox - gives a stylish look can be moved with ease, thanks to gas springs. Save up to 15% on fuel with CARRYBOY The cover is insensitive in robust use ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses Offer in white primer, also available in body color lockable - two keys incl. Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included

Carryboy load compartment cover made of GfK - R-795-MNDF for Fiat Fullback double cab from 2015+ with roll bar / protection bar Individual design elements depending on the vehicle can be moved with ease, thanks to gas springs. Save up to 15% on fuel with CARRYBOY insensitive in daily use exceptionally long service life stable and easy to use Offer in white primer, also available in body color lockable - two keys incl. The lid also closes the loading area at the same time Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included

CARRYBOY - load compartment cover lid with stainless steel bracket  GRX-MND for the current Mitsubishi L200 double cab 2016+ with painted roll bar / protective bar with stainless steel inserts can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in white primer, also available in body color securely lockable - two keys incl. locks the entire loading area Save up to 15% on fuel with CARRYBOY Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included   The GRX cargo area cover from CARRYBOY for the Mitusbishi L200 from year of construction 2016 is a stylish, but at the same time functional cover. This Mitsubishi L200 accessory combines the appealing element of a painted tonneau cover with a polished stainless steel styling bar for contrast. The optimal mix for the most elegant design on the market! The load compartment cover with lid and styling bar is also suitable for the Fiat Fullback double cab. The GRX flat cover for the Mitusbishi L200 double cab adapts seamlessly to the vehicle thanks to the paint finish in the vehicle color. The edges of the load compartment lid are curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. All around seals lay on the cargo area of your vehicle and keep water and dust out of the cargo area. Rain drains freely through the lid on the edge of your Mitsu L200 double cab pickup. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX load compartment cover is made as a Mitsubishi L200 accessory together with the roll bar in one piece, there are no rattling parts, unnecessary places for water to enter or unsightly seams. The cargo area of your Mitsubishi L200 double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not sufficient, the loading space can be equipped with our lower edge lighting system Blight as a further Mitsubishi L200 accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX load compartment cover for the Mitsu L200 double cab and the Fiat Fullback double cab from year of construction 2016. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturers.

Carryboy roll cover aluminum cover CB-789-MND for Mitsubishi L200/Fiat Fullback Double Cab 2016+ / 2019+ Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with lower edge - load compartment tub detailed assembly description - assembly kit included only suitable without front protection grille, stainless steel bracket   The Rollerlid 789 for the Mitsubishi L200 double cab is an aluminum roller blind for retrofitting on your Mitsubishi L200. The flat roller blind for the L200 double cab, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not essential. The aluminum roller blind from CARRYBOY for the Mitsu L200 double cab is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind for the Mitubishi L200 double cab is particularly robust and resilient. The ergonomic grip strip for operating the L200 roller blind has a good grip thanks to the ribbing - even in wet weather! The Rollerlid 789 for the Mitsubishi L200 double cab is installed flat at the height of the loading sill. Rainwater that falls on the cargo area of the Mitsubishi L200 is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Mitusbishi L200 double cab and is therefore a secure and flexible closure. The aluminum roller blind 789 is an attractive and flexible Mitsubishi L200 accessory.  

Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you! The high-quality Carryboy load compartment cover model 899 is the perfect extension for your Ford Ranger 2023+ double cab pickup. Benefit from our strong Carryboy cargo area cover model 899 for your Ford Ranger double cab built between 2023 and 2023. Our cargo area cover for your Ford Ranger double cab (doublecab) from year of construction 2023 adapts seamlessly to your vehicle. Combine high-quality design with the best protection for your cargo area, without having to forego the classic, beloved style of a pickup truck! Your pickup is offered a comfortable and high-quality protection. Mounting kit and installation instructions are included. Optionally, you can watch our assembly videos on Youtube. If you have any questions, you can contact us at any time. If necessary, we take over the professional construction of the load compartment cover. Our employees are technically adept, professionally competent and have practical experience! Benefit from our strong Carryboy cargo area cover model 899 for your Ranger double cab built in 2023 - 2023. A strong Ranger tonneau cover model 899 - double cab, electric by CARRYBOY The load compartment cover CB-899-B-FRD for your Ford Ranger allows easy opening and closing of the cover through electrical operation . The CARRYBOY 899 for the Ford Ranger can be driven open . This allows large goods to be loaded without having to remove the cover! Your Ranger load compartment cover can be locked using an automatic lock. This protects your goods from theft, water and dirt. The Ranger cargo area cover is well protected by the integrated lock. The cover for your Ford Ranger can only be unlocked from the inside . The tonneau cover is flat . Thanks to its flat design, the 899 cover for your Ford Ranger double cab is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup truck and don't miss out on the advantages of tonneau covers! Mounting with mounting rails and brackets allows the load compartment cover to be more stable. The load compartment cover is particularly secure thanks to fastening rails and clips. The load compartment cover 899 from CARRYBOY for your Ford Ranger double cab (Doublecab) year of construction 2023 - 2023 is made of aluminium . The load compartment cover Ranger 899 combines a low dead weight, robustness, stability and durability as properties and requirements. For this reason, the load compartment covers use aluminum as the material. The third brake light is always visible on the load compartment cover 899. The approximate fitting time is 1-3 hours on your Ford Ranger. Equip your Ford Ranger double cab (Doublecab) with a special, UV-resistant CARRYBOY 899 cargo area cover. This increases the life of the cover - it is protected from the sun and fading. Enjoy full access from all sides - our tonneau cover will not block access to your cargo area . Load from both sides or the back, depending on your needs. The Ranger double cab (Doublecab) cover is lockable with remote control . Protection against sneaky eyes and thieves! The load compartment cover can only be unlocked from the inside . In summary, the points "" Convenient use, leisure and daily use "" reflect the case for which the CARRYBOY tonneau cover 899 for your Ford Ranger Double Cab (Doublecab) 2023 - 2023 is particularly suitable . The special features of the load compartment cover are: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof . You can order the Carryboy 899 load compartment cover coated . The entire equipment at a glance: for Ford Ranger double cab (Doublecab) year of construction 2023 - 2023 CARRYBOY trunk cover manufactured by CARRYBOY Material: aluminum 3rd. Brake light always visible lockable with remote control Operation: electric special feature: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof particularly suitable for: convenient use, leisure and daily use mobile when open particularly UV-resistant flat Loading area fully accessible Type of mounting: mounting rails and brackets can only be unlocked from the inside Surface finish: structured: glossy black Transverse arches/slats: aluminium Frame: aluminum: matt black approximate assembly time: 1-3 h Locking & Closure: Automatic locking coated Our recommendation for your Ford Ranger double cab Our first-class CARRYBOY cargo area cover 899 from Carryboy for your Ford Ranger 2023 - 2023 double cab is suitable for every purpose! It is an ideal tonneau for convenient use, leisure and daily use, protecting and transporting everyday goods. Use the tonneau for leisure and business! We recommend fixed covers or a roller blind type blind for primarily commercial use. We recommend checking out our tonneau cover comparison charts: https://www.novisauto.de/Downloads-Documents/ Best service - before and after the purchase Use our first class service! Questions? uncertainties? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . We work every day in the office AND warehouse. We have an extensive wealth of experience over 16 years of practical performance. You can look forward to technically experienced, professionally competent and practically experienced employees. When the ravages of time are at work: Our unique spare parts (service) offers you spare parts for several years after product purchase! Your Ford Ranger double cab (Doublecab) year of construction 2023 - 2023 is well equipped with our load compartment cover 899. Protect your environment by using our products for life! Cargo area covers from CARRYBOY! Are you concerned about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our covers to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production.

CARRYBOY - load compartment cover  Model SFB-Fullbox-MND for Mitsubishi L200 Double Cab 2016+ Fullbox - gives a stylish look can be moved with ease, thanks to gas springs. Save up to 15% on fuel with CARRYBOY The cover is insensitive in robust use ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses Offer in white primer, also available in body color lockable - two keys incl. Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included

CARRYBOY - load compartment cover lid with stainless steel bracket GRX-MTDL for Mistubishi L200 double cab (years of construction 2005-2015) with painted roll bar / protective bar with stainless steel inserts can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in white primer, also available in body color securely lockable - two keys incl. locks the entire loading area Save up to 15% on fuel with CARRYBOY Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included   The GRX cargo area cover from CARRYBOY for the Mitsubishi L200 built between 2005 and 2015 is a stylish but also functional cover. This Mitsubishi L200 accessory combines the appealing element of a painted tonneau cover with a polished stainless steel styling bar for contrast. The optimal mix for the most elegant design on the market! The GRX flat cover for the older L200 double cab fits seamlessly into the vehicle thanks to the paintwork in the vehicle color. The edges of the load compartment lid are curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. All around seals lay on the cargo area of your vehicle and keep water and dust out of the cargo area. Rain drains freely over the lid on the edge of your Mitsu L200 2005-2015 double cab pickup. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX load compartment cover for the Mitsubishi L200 is made in one piece together with the roll bar, there are no rattling parts, unnecessary points for water entry or unsightly seams. The cargo area of your Mitsubishi L200 2005-2015 double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not sufficient, the loading space can be equipped with our lower edge lighting system Blight as a further Mitsubishi L200 accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX cargo area cover for the Mitsu L200 double cab (2005 - 2015). We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.

Carryboy cargo area cover  Model SR can be moved with ease, thanks to gas springs. Save up to 15% on fuel with Carryboy The cover is insensitive in robust use ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses Paintwork in body color possible lockable - two keys incl.

Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you! Our Carryboy cargo area cover model 899 offers you many advantages over a bare cargo area platform and is therefore a useful addition to your double cab pickup Isuzu D-Max 2021+. Benefit from our recommended Carryboy cargo area cover model 899 for your Isuzu D-Max double cab model year 2021 to 2023. The tonneau cover was developed specifically for your pickup truck and is tailor-made for the D-Max. Unique, high-quality pickup-style design. Protect your pickup conveniently and with high quality. Mounting kit and installation instructions are included. You can also watch our assembly videos on Youtube. If you have any questions, you can contact us at any time. On request, we can take care of the professional construction of the load compartment cover. Our employees are technically adept, professionally competent and have practical experience! Benefit from our strong Carryboy cargo area cover model 899 for your D-Max double cab built between 2021 and 2023. A strong D-Max tonneau cover model 899 - double cab, electric from CARRYBOY The load compartment cover CB-899.9 for your Isuzu D-Max enables easy opening and closing of the cover through electrical operation . The load compartment cover 899 from CARRYBOY for the Isuzu D-Max can remain open while driving. Nothing stands in the way of loading goods higher than the edge of the loading space! Your D-Max load compartment cover can be locked using an automatic lock. Your D-Max is thus safely protected from thieves and stealing eyes. The D-Max cargo area cover is well protected by the integrated lock. The cover for your Isuzu D-Max can only be unlocked from the inside . The tonneau cover is flat . Due to its flat design, the cover 899 for your Isuzu D-Max double cab (Doublecab) is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup truck and don't miss out on the advantages of tonneau covers! Mounting with mounting rails and brackets allows the load compartment cover to be more stable. The load compartment cover is particularly secure thanks to fastening rails and clips. The 899 load compartment cover from CARRYBOY for your Isuzu D-Max double cab (Doublecab) year of construction 2021 - 2023 is made of aluminium. Low weight, robustness, stability and durability are the special properties of aluminium . Among other things, the tonneau cover 899 for your D-Max uses aluminum for this reason. The third brake light is always visible on the load compartment cover 899. The approximate fitting time is 1-3 hours on your Isuzu D-Max. The load compartment cover CARRYBOY 899 for your Isuzu D-Max double cab (Doublecab) is particularly UV-resistant . This increases the life of the cover - it is protected from the sun and fading. Enjoy full access from all sides - our tonneau cover will not block access to your cargo area . Load from both sides or the back, depending on your needs. The cargo area cover for your D-Max double cab (Doublecab) is lockable with a remote control . Protection against sneaky eyes and thieves! The load compartment cover can only be unlocked from the inside . In summary, the CARRYBOY tonneau cover 899 for your Isuzu D-Max double cab (Doublecab) 2021 - 2023 is particularly suitable for: Comfortable use, leisure and daily use . The special features of the load compartment cover are: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof . You can order the Carryboy 899 load compartment cover coated . Your CARRYBOY cargo area cover at a glance: for Isuzu D-Max double cab (Doublecab) year of construction 2021 - 2023 CARRYBOY trunk cover manufactured by CARRYBOY Material: aluminum 3rd. Brake light always visible lockable with remote control Operation: electric special feature: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof particularly suitable for: convenient use, leisure and daily use mobile when open particularly UV-resistant flat Loading area fully accessible Type of mounting: mounting rails and brackets can only be unlocked from the inside Surface finish: structured: glossy black Transverse arches/slats: aluminium Frame: aluminum: matt black approximate assembly time: 1-3 h Locking & Closure: Automatic locking coated Our recommendation for your Isuzu D-Max double cab Our first-class CARRYBOY cargo area cover 899 from Carryboy for your Isuzu D-Max 2021 - 2023 double cab is suitable for every purpose! It is an ideal cover for convenient use, leisure and daily use, protecting and carrying everyday goods. Use the covers for leisure and business! We recommend a fixed tonneau or roller blind type blind for primarily commercial use. We recommend checking out our tonneau cover comparison charts: https://www.novisauto.de/Downloads-Documents/ Best service - before and after the purchase Use our first class service! Questions or uncertainties? Contact us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . We work every day in the office AND warehouse. We have an extensive wealth of experience over 16 years of practical performance. You can look forward to technically experienced, professionally competent and practically experienced employees. When the ravages of time are at work: Our spare parts service, which is unique in the industry, offers you spare parts for several years after you have purchased the product! So your Isuzu D-Max double cab (Doublecab) year of construction 2021 - 2023 is well equipped with the load compartment cover model 899. Protect your environment by using our products for life! Cargo area covers from CARRYBOY! Is long-term use and thus sustainability important to you? No problem! The use of high-quality materials, raw materials and parts enables our bins to have a long service life and useful life. It is precisely this lifelong use that enables valuable resources to be saved - sustainability through useful life!

Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you! The high-quality Carryboy load compartment cover model 899 is the perfect extension for your double cab pickup Toyota Hilux Revo 2016+. Benefit from our recommended Carryboy cargo area cover model 899 for your Toyota Hilux double cab year of construction 2016 to 2023. The Toyota Hilux cargo area cover adapts seamlessly to your vehicle. High-quality design - keep your beloved pick-up style and appearance and give your cargo area that little something extra! Your pickup is offered a comfortable and high-quality protection. Mounting kit and installation instructions are included. If necessary, you can watch our assembly videos on Youtube. If you have any questions, you can contact us at any time. On request, we can take care of the professional construction of the load compartment cover. Our employees are technically adept, professionally competent and have practical experience! Benefit from our strong Carryboy cargo area cover model 899 for your Hilux double cab built between 2016 and 2023. A strong Hilux tonneau cover model 899 - double cab, electric from CARRYBOY The load compartment cover CB-899.10 for your Toyota Hilux enables the cover to be opened and closed easily thanks to electrical operation . The load compartment cover 899 from CARRYBOY for the Toyota Hilux can remain open while driving. Nothing stands in the way of loading goods higher than the edge of the loading space! The load compartment cover can be locked using an automatic lock. Your Hilux is thus safely protected from thieves and prying eyes. The Hilux load compartment cover is well protected by the integrated locking mechanism. The cover for your Toyota Hilux can only be unlocked from the inside . The tonneau cover is flat . Thanks to its flat design, the 899 cover for your Toyota Hilux double cab is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup truck and don't miss out on the advantages of tonneau covers! Mounting with mounting rails and brackets allows the load compartment cover to be more stable. The load compartment cover is particularly secure thanks to fastening rails and clips. The 899 load compartment cover from CARRYBOY for your Toyota Hilux double cab (Doublecab) year of construction 2016 - 2023 is made of aluminum . Low weight, robustness, stability and durability are the special properties of aluminium . Among other things, the load compartment cover 899 for your Hilux uses aluminum for this reason. Enjoy an always visible 3rd brake light on the load compartment cover - the approximate installation time is 1-3 hours on your Toyota Hilux. Equip your Toyota Hilux double cab (Doublecab) with a special, UV-resistant CARRYBOY 899 cargo area cover. This increases the life of the cover - it is protected from the sun and fading. Enjoy full access from all sides - our tonneau cover will not block access to your cargo area . Load from both sides or the back, depending on your needs. The Hilux double cab (Doublecab) cover is lockable with remote control . Protection against sneaky eyes and thieves! Our load compartment cover can only be unlocked from the inside . In summary, the points "" Convenient use, leisure and daily use "" reflect the case for which the CARRYBOY tonneau cover 899 for your Toyota Hilux Doublecab 2016 - 2023 is particularly suitable . Spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality appearance, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof : these are the special features of the luggage compartment cover. You can order the Carryboy 899 load compartment cover coated . Your CARRYBOY cargo area cover at a glance: for Toyota Hilux double cab (Doublecab) year of construction 2016 - 2023 CARRYBOY trunk cover manufactured by CARRYBOY Material: aluminum 3rd. Brake light always visible lockable with remote control Operation: electric special feature: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof particularly suitable for: convenient use, leisure and daily use mobile when open particularly UV-resistant flat Loading area fully accessible Type of mounting: mounting rails and brackets can only be unlocked from the inside Surface finish: structured: glossy black Transverse arches/slats: aluminium Frame: aluminum: matt black approximate assembly time: 1-3 h Locking & Closure: Automatic locking coated Our recommendation for your Toyota Hilux double cab Our first-class CARRYBOY cargo area cover 899 from Carryboy for your Toyota Hilux 2016 - 2023 double cab is suitable for every purpose! It is an ideal cover for convenient use, leisure and daily use, protecting and carrying everyday goods. Use the tonneau for leisure and business! We recommend a fixed tonneau or roller blind type blind for primarily commercial use. We recommend checking out our tonneau cover comparison charts: https://www.novisauto.de/Downloads-Documents/ Best service - before and after the purchase Rely on our service! uncertainties? Questions? Talk to us by email or phone! Look forward to detailed and customer-oriented advice . We work every day in the office AND warehouse. We have an extensive wealth of experience over 16 years of practical performance. You can look forward to technically experienced, professionally competent and practically experienced employees. Should parts nevertheless break after use: Our spare parts service, which is unique in the industry, offers you spare parts for several years after you have purchased the product! Our load compartment cover 899 complements your Toyota Hilux double cab (Doublecab) year of construction 2016 - 2023 perfectly. Protect your environment by using our products for life! Cargo area covers from CARRYBOY! Are you concerned about sustainability or long-term use? No problem! A long service life and useful life of our tonneau is made possible by the use of high-quality parts, raw materials and materials. Lifelong use saves valuable resources and leads to sustainability!

CARRYBOY - load compartment cover  Model SMX-MND with motor lift for Mitsubishi L200 Double Cab 2016+ / 2020+ Two electric motors - semi-automatic operation Save up to 15% on fuel with CARRYBOY The cover is insensitive in robust use ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses Paintwork in body color possible lockable - two keys incl.

Carryboy - Softlid 743 vinyl tarpaulin cargo area cover with Velcro  for Mitsubishi L200 double cab from year of construction 2016 (also 2020+ with Adblue) Cargo area tarpaulin - plastic-laminated, waterproof and robust Lateral drainage rails for rainwater - water is drained off via the tailgate weatherproof and moisture resistant The tarpaulin is attached with Velcro / can be driven open Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses detailed assembly description - assembly kit included   The CARRYBOY vinyl tarpaulin type cargo area cover for the Mitsubishi L200 combines ease of use with an unbeatable price-performance ratio. The load compartment tarpaulin for the L200 double cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Mitsubishi L200 double cab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality lightning fasteners reliably secure the tarpaulin for the loading area of the Mitsubishi L200, so that it is also possible to drive with the tarpaulin open. The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the L200 pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your L200 loading area. All-round seals and a drainage system for rainwater keep this reliably away from the cargo area. The Softlid CB-743 from Carryboy for the Mitusbishi L200 double cab (2016+) can be combined with the current design of the loading area, which has remained unchanged since 2016 and beyond 2020. The different heights of the Mitsubishi L200 loading area are cleverly used for the installation of a rainwater drainage system. To do this, two black drain rails are attached directly to the sheet metal of the vehicle. Water that collects on the vinyl tarpaulin for the L200 is reliably drained away via the tailgate via these rails - this keeps the cargo area reliably dry. Please note that the Carryboy Softlid CB-743 must be attached directly to the inner panel of the loading sill for installation. We recommend blind rivet nuts for this. As an alternative to shipping the tarpaulin, we also offer an on-site installation service. * Please note: The original Mitsubishi L200 / Fiat Fullback load compartment liner with edge protection (MOPAR) requires additional, minor adjustments. For installation with a MOPAR liner, the clamped / screwed lashing eyes on the upper edge of the vehicle must be removed. The sloping edges of the loading tray at the front end of the loading area must be cut out. There is no vehicle sheet metal underneath these. Finally, the small "bulge" of the loading tray at the rear end just before the bend (in front of the tailgate) must be removed. All adjustments can be made in a short time with a milling cutter or Dremel, as well as an Allen key.

Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener for Mitsubishi L200 Double Cab 2005-2015 short bed (141cm) Cargo area tarpaulin - plastic-laminated, waterproof and robust Installation on loading sill, ideal for building with over edge - loading space tub weatherproof and moisture resistant The tarpaulin is attached with Velcro / can be driven open Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses detailed assembly description - assembly kit included   The CARRYBOY vinyl tarpaulin cargo area cover for the Mitsubishi L200 double cab built between 2005 and 2015 combines ease of use with an unbeatable price-performance ratio. The cargo area tarpaulin for the L200 Shortbed Double Cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Mitsubishi L200 double cab (2005 - 2015) guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality quick-release fasteners reliably secure the tarpaulin for the loading area of the L200 double cab, so that it is also possible to drive with the tarpaulin open. The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin unmistakable for the older Mitsu L200 double cab pickup. In addition, the tarpaulin provides effective protection against dust and water for your Mitsubishi double cab loading area. All-round - seals reliably keep the elements away from the cargo area. Water that collects on the vinyl tarpaulin for the L200 double cab is reliably drained off via the anodised aluminum frame - so the cargo area stays dry. An installation without drilling is possible for all Mitsubishi L200 vehicles with over-edge tub. However, installation with brackets or front protection grilles cannot be carried out. Please note that the Carryboy Softlid CB-743 must be attached directly to the loading sill for installation without an overedge. We recommend blind rivet nuts for this. As an alternative to shipping the tarpaulin, we also offer an on-site installation service.

Carryboy Sportlid SX lid made of GRP adjustable with gas springs for Mitsubishi L200 Double Cab 2016+/ 2021+ can be moved with ease, thanks to gas springs. Save up to 15% on fuel with Carryboy The cover is insensitive in robust use ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses Paintwork in body color possible lockable - two keys incl. The lid also closes the loading area at the same time

Carryboy - load compartment cover lid model SX-MTDL for Mitubishi L200 double cab (2005-2015) long bed (151cm) Load compartment lid with gas spring - operation, angle of attack approx. 40° insensitive in robust use, thanks to the very stable GRP base material ideally suited for an exceptionally long service life, easy to repair LED interior light, manual control All around - seals lie on the loading sill and seal reliably Offer in white primer, also available in body color Save up to 15% on fuel with Carryboy lockable - two keys incl. complete closure of the load compartment with the cover possible, even without a tailgate lock Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The SX cargo area cover from CARRYBOY for the L200 double cabin long bed with 151cm is a solid, functional cover made of unbreakable and stable GRP - glass fiber plastic. The rotary lock with cylinder and set of keys enables the entire Mitsubishi L200 long-bed pick-up load compartment to be locked securely. The high-quality, thickly laminated GRP material offers a multitude of advantages in daily use: In addition to high resistance to breakage and high stability, it is also very easy to repair when used later. This Mitsubishi L200 2005-2015 accessory from CARRYBOY is the basis of every cargo area cover: Simple, yet very attractive design, quick and easy installation, all-round protection of the cargo area from dust and water. A secure closure of the entire loading space should not be missing from the properties either! The offer is rounded off with an optional paint finish in the vehicle color - the cover can also be supplied with a white primer. The flat cover - cover SX for the L200 double cabin long bed has side edges that are curved over the edge of the vehicle. This ensures a secure closure of the entire loading area. All-round seals lie on the loading edge of your vehicle and keep water and dust out of the loading area. Rain drains off the lid on the edge of your L200 double cab pickup. The cargo area of your older Mitsubishi L200 can be equipped with the  CARRYBOY lid will be brightly lit! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not sufficient, the loading space can be equipped with our lower edge lighting system Blight as an additional L200 accessory. The brake light in the driver's cab is always reliably visible! Be on the safe side with the CARRYBOY cargo area cover SX for the L200 double cabin long bed 151cm. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.

CARRYBOY - load compartment cover  Model SFB-Fullbox-MTDL for Mitsubishi L200 double cab 2005-2015 long form (151cm loading area) Fullbox - gives a stylish look can be moved with ease, thanks to gas springs. Save up to 15% on fuel with CARRYBOY The cover is insensitive in robust use ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses Offer in white primer, also available in body color lockable - two keys incl. Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included

Carryboy load compartment cover made of fiberglass with bracket model R-795-MND for Mitsubishi L200 double cab with roll bar / protection bar Individual design elements depending on the vehicle can be moved with ease, thanks to gas springs. Save up to 15% on fuel with CARRYBOY insensitive in daily use exceptionally long service life stable and easy to use Offer in white primer, also available in body color lockable - two keys incl. Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The lid also closes the loading area at the same time

Carryboy chassis body  Aluminum tray model the perfect service structure on your pickup chassis Standard version: powder coated steel brackets roll bar in front Floor made of non-slip aluminum profiles integrated dirt trap Aluminum rear light guard (optional) All aluminum construction flap safety relatively easy assembly nevertheless: we recommend  assembly by a body shop Mounting kit included Secured supply of spare parts  from the "Authorized Dealer" (Carryboy Germany). We prefer collection by our customers, but we are also happy to deliver as a kit, protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.

  Carryboy chassis body  CSV Tradesman model  - the perfect service structure on your pickup chassis  - Available in all body colors. Suitable for Mitsubishi L200 double cab 2016+/2019+ Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - three LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - rear bumper made of high quality stainless steel - Rear lights protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day),  nevertheless: we recommend  assembly by a body shop - Mounting kit included Secured supply of spare parts from the "authorized dealer" (Carryboy Germany). In addition, if desired, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customer, but we also deliver protected  in wooden frame  at an attractive delivery price - please ask for the freight costs. Of course, assembly at our location is also possible. You provide us with your vehicle, or we will supply you with the fully assembled vehicle with CSV structure! - Please contact us, we will be happy to advise you.