NOVISauto load compartment cover LOPRO - tarpaulin for rolling - TXJG20

Saddlebag -  Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away  in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.   

Compact size security box for flexible installation in vehicles - ideal for wallets, travel documents, cash and as hunting equipment for the vehicle The compact size security box from NOVISauto offers convenient protection for your cash, travel documents and check cards in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is flexibly attached to a fixed point using a coated steel cable. To protect the contents, the safety box is lined with foam on the inside. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, campers and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. For safe, flexible installation, there should be an accessible fixing point for the steel sling. By the way: This safety box can also be used as hunting equipment. Securely lock your handgun in compact size or special knife and thus ensure the prescribed safe transport in the vehicle. Standard equipment: Unique laptop safe for installation in all vehicles with enough space Fixed Installation : Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) Flexible installation : Reinforced steel sling 66cm long, for attaching to a fixed point without screw connection or drilling - tensile strength tested up to 1000kg Use : employees in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools / hunting equipment Robust workmanship and strength : Box welded all around from 1.3 mm steel plates - powder-coated matt black Lid with seal and continuous particularly stable hinge - 2.6mm material thickness Padding: Foam padding to protect valuables from damage Lock: combination lock designed as a rotary lock (alternative: Pryguard cylinder lock with security key) External dimensions: 245mm length // 165mm width // 45mm height - weight 1.5kg Inside dimensions (with pad): 200mm length // 140mm width // 30mm height

NOVISauto - LOCKBOX - AutoSafe for permanent installation The compact security box from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is permanently attached to the vehicle and offers optimal protection for documents, tablets, laptops, cash and much more. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. Standard equipment: Unique vehicle safe for installation in all vehicles with enough space Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools Robust workmanship and strength: 1.3 mm thick steel - welded all around - matt black powder-coated Lid with seal and continuous hinge - powder-coated Standard lock: Exclusive lock for double-bit keys with 10 tumblers Alternative lock: 3 digit combination with rotary lock without key (see accessories) External dimensions: 159mm length // 400mm width // 257mm height Internal dimensions: 146mm length // 384mm width // 248mm height

NOVISauto - Autosafe lockable storage compartment for Jeep Gladiator / Jeep Wrangler JL 2021+ Your smaller valuables, such as personal documents, passport, mobile phone, medication are safely stored in the NOVISauto car safe. When accessing the content, the lid remains open.  The look of the console with the built-in NOVISauto car safe corresponds to the standard equipment. The functions of the factory armrest and cover are fully retained, and the accessory tray can also be used. The steel container of the car safe has a durable textured powder coating. Installation without drilling. Security: The NOVISauto car safe made of 1.5 mm steel offers security and comfort, a safe and secure place for valuables and documents that you want to have at hand when you are out and about. While preserving the exterior appearance of your original console, NOVISauto's car safe converts your OEM console into a heavy-duty, lockable storage area. The Pry-Guard locking system with 10 tumblers with a double-bit security key is used to protect valuables from unauthorized access. Comfort: NOVISauto's car safe provides access to optional OEM USB and power outlets from the console. The innovative design utilizes an exclusive lid stay that keeps the lid open while accessing the contents. The lockable car safe remains unobtrusive under the original cover and, like the armrests and the accessory tray, is always fully usable. Dimension: 30cm width * 20cm length * 17cm height (approx. 6L storage volume)  

NOVISauto – SwingCase for the Jeep Gladiator 2020+ The ultra-practical box for tools, sporting goods and lots of small parts! You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing"  is more needed! NOVISauto, the leader in selling popular Jeep Gladiator 2020+ accessories, builds these versatile storage boxes out of high-impact ABS hard plastic for your comfort - strong enough for a long Jeep Gladiator. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your gladiator. - Purchasing two SwingCases for both sides of your Jeep Gladiator platform wall is the best choice - space-saving, completely leak-proof and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts!  SwingCase can be parked lying down or standing as usual. To save space, fix the SwingCase tool box to the side between the platform flap and the wheel housing on the Gladiator with all loading area lengths. SwingCase for your new Jeep Gladiator Truck can be swung out , and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of manufacture. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. The tool box (tool box) and storage box is an essential Jeep Gladiator accessory for every tradesman or hobby - do-it-yourselfers. The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Jeep Gladiator pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.

Tablet security box for fixed or flexible installation in vehicles The tablet security box from NOVISauto offers convenient protection for your tablet or other larger valuables in the vehicle. The steel container with a thick wall - lockable with a number combination lock (3 combination) - is flexibly attached to a fixed point in the car using a coated steel cable. The generous storage space of the box offers space for most tablets with standard screen sizes. The inside of the safety box is lined with black foam to protect the electronics. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. For safe, flexible installation, there should be an accessible fixing point for the steel sling. Due to the attachment with a steel cable and the low weight of approx. 3.5kg, this safe can also be carried between vehicle / office / home. Standard equipment: Unique tablet safe for installation in all vehicles with enough space Flexible installation : Reinforced steel sling, black coated, for attaching to a fixed point without screw connection or drilling - tensile load up to 1000kg - length 65cm. Fixed installation: Pre-drilled holes on the steel box for attaching to solid surfaces with screw connection Use : Electronic lock (e.g. tablet or mini-laptop), valuables lock for travelers and camping, fleet needs Robust workmanship and strength : Box welded from 1.3 mm steel plates - powder-coated Lid with seal : Continuous stable hinge - including removable hinge lock (connects full opening of the lid) Power supply & data exchange: passages on the cover for power and data cables Padding: Foam pads prevent damage and shifting of the contents Closure: 3-digit combination lock with twist lock - double steel bar inside External dimensions: 355mm length // 270mm width // 45mm height Internal dimensions: 330mm length // 205mm width // 25mm height

The handy and compact solution for your valuables that you always want to carry with you. The valuables box from NOVISauto offers versatile protection for these items. Benefit from safe storage with maximum mobility at the same time. The portable valuables cassette is supplied with a holder for the vehicle. Additional holders, for example for installation in the house, in the caravan or elsewhere, are available from us. The safe cassette can be pushed into the holder and secured. To take the closed cassette with you, it can be removed from the holder again. The cassette can be stored elsewhere in another holder without opening it. Ideally suited as hunting equipment for the vehicle. Are you obliged to remove all valuables from the car or to keep them safe? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, campers and pickups - residential structures. The only condition for installation: There must be enough space to hold the security cassette. Standard equipment: Portable slide-in cassette including a holder for permanent installation Install Bracket: Bolt to vehicle or other suitable surface with SAE J429 Grade 8 Fastening Kit (High Tensile Alloy Steel) Usage: Ideal for hunting or for locking valuables that you carry with you Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated Padded inside with foam Lid with seal and continuous hinge - including hand strap Standard lock: Exclusive lock for double-bit keys with 10 tumblers Alternative closure: Additional pressure cylinder lock for quick opening of the box External dimensions: 230mm length // 255mm width // 76mm height Inside dimensions: 155mm length // 240mm width // 50mm height

Laptop security box for fixed or flexible installation in vehicles The laptop security box from NOVISauto offers convenient protection for your tablet or laptop in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is either firmly screwed into the vehicle or flexibly attached to a fixed point using a sheathed steel cable. The generous storage space of the box offers space for most laptops or tablets with a screen size of up to 15 inches. The inside of the safety box is lined with black foam to protect the electronics. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. For safe, flexible installation, there should be an accessible fixing point for the steel sling. Standard equipment: Unique laptop safe for installation in all vehicles with enough space Fixed Installation : Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) - Standard Flexible installation : Reinforced steel sling, black coated, for attachment to a fixed point without screw connection or drilling - to be purchased as an extra Use : employees in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools / hunting equipment Robust workmanship and strength : Box welded all around from 1.3 mm steel plates - powder-coated matt black Lid with seal and continuous particularly stable hinge - 2.6mm material thickness Padding: up to 5 cm thick foam padding inside prevents damage and slipping of the contents Closure: Exclusive Pryguard lock with security key and weather seal. External dimensions: 465mm length // 135mm width // 362mm height Internal dimensions: 400mm length // 71mm width // 288mm height

NOVISauto - lockable cassettes with stereo compartment (model Stereo DELUXE) for car center consoles The lockable Autosafe cassette for installation in the center console of your pickup or SUV offers security for your valuables. In addition to the lockable security compartment "SERIES 2", the "Deluxe" car safe cassette for the center console offers an additional compartment for installing a CD player. Security : The cassettes offer a safe and secure place for valuables that you want to have close at hand while driving.  The stable cassette is made of 1.5 mm thick steel with a tight-fitting lid. Locking is via the US-patented, burglar-proof locking system  Pry-Guard with double-bit key with 10 tumblers.  The unique design includes an exclusive hinge system. Grade 8 mounting hardware is included. The Stereo Deluxe consoles are equipped with patented push-button locking system and Pry-Guard II locking system, which ensure lasting security. Furnishing: The outside of the cassette has a durable black powder coating with a textured finish. Choose the color to match the interior of your vehicle: Black beige brown The bottom of the cassette is covered with a rubber mat, the cup holder can accommodate different formats thanks to the size of the openings, flexible rubber mounts are used to minimize vibrations while driving. Comfort: The padded and vinyl covered armrests are for your personal comfort. That  Patented push button locking system allows the lid to be closed without locking. Useful details such as a practical storage compartment and a removable small parts tray under the lid  complete the offer. Assembly: Supplied with high quality mounting kit and more detailed  installation instructions. Note: Standard hardware will require holes to be drilled and secured with the fasteners provided. Depending on your vehicle's center console design, additional hardware may be required.  

CARRYBOY - storage box / transport box for pickup - loading area of all brands Front opening CB-704 standard size Standard in the following version: - Painted in silver metallic - best quality by processing high-quality materials - dimensionally stable, unbreakable and resilient - Lid lockable with spring lock, spring hinges, 2 keys - Rain seal - Chrome trim - robust, dark and easy-care woven fabric inside, rubber mat on the floor - Includes assembly set for attaching the storage box to the front tail lift - assembly description - Storage space approx. 0.2 - 0.23 cbm NOTICE TO OUR CUSTOMERS: Please note the dimensions (length x box width on the floor x box height x wheel arch height): Article 704-C:   1304x350x495x282mm Article 704-J:   1380x345x553x247mm Other storage boxes are available: - Article 735 with a locking lid, storage space approx. 0.43 cbm - Article 737 with two closure lids, storage space approx. 0.43 cbm - Item 774 for lateral attachment to the long side wall of the platform, approx. 0.22 cbm

CARRYBOY - XXL storage box / transport box Jumbo 735 - front opening for sport and business  -  for all pickups - Lid can be locked in the middle with a rotary lock - 2 keys are included - Rain seal - Paintwork in silver metallic / matt black / plain black - Chrome trim - Gas pressure shock absorber - Interior lining using robust dark gray woven fabric, floor rubber mat - Includes assembly set for attaching the storage box to the front tail lift - assembly description - Storage space approx. 0.40 - 0.45 cubic meters - Dimensions according to the attached figure (L x W x H )

CARRYBOY - pickup loading areas storage box / transport box / jumbo box - 737 side opening right / left for all pickups Standard version: - best quality by processing high-quality materials - dimensionally stable, unbreakable and resilient - Two lids can be closed on the side and in the middle with rotary locks - 2 keyed alike are included - Rain seal - Paintwork in silver metallic - Chrome trim - Gas pressure shock absorber - Interior lining with robust dark gray woven fabric, floor rubber mat - Includes assembly set for attaching the storage box to the front tail lift - assembly description - Storage space approx. 0.45 - 0.48 cbm - A notice: Please note before placing your order: a mounted roll bar can be a hindrance when opening and closing the side storage box lid. - In this case, we would recommend storage box item 735 or 704 with a front-closing lid. Other storage boxes are available: - Item No. 735A with front-closing cover - 1290 x 550 x 555 x 285 mm, approx. 0.40 cbm - Item No. 735B with front-closing cover - 1380 x 550 x 555 x 255 mm, approx. 0.43 cbm - Item No. 704C with front-closing cover - 1304 x 350 x 495 x 282 mm, approx. 0.20 cbm - Item No. 704J with front-closing lid - 1380 x 345 x 553 x 247 mm, approx. 0.24 cbm

NOVISauto  - AutoSafe / lockable storage box for valuables for permanent installation in the trunk The trunk security box from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is permanently attached to the vehicle and offers optimal protection for documents, tablets, laptops, cash and much more. The generous storage space including a shelf for small items offers space for all kinds of items. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. Standard equipment: Unique trunk safe for installation in all vehicles with enough space Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable safety box for valuable tools / hunting equipment Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated Lid with seal and continuous hinge - powder-coated Integrated storage compartment for small items 225mm length // 160mm width // 75mm height Closure: Pryguard pressure lock with security key and weather seal. The box can either be simply closed or firmly locked by pressing the lock. Then it can only be opened with a key. External dimensions: 245mm length // 860mm width // 290mm height Inside dimensions: 230mm length // 840mm width // 280mm height

NOVISauto - automobile transport box for hunting weapons / tools When transporting rifles, firearms, but also hunting knives with a long blade, it must be ensured that these are not readily accessible. The requirement is met if the gun is in a locked container - for example in one of our car gun boxes or in a gun transport box. These reliably hide the hunting rifle from the eyes of third parties. The compact automotive hunting gun safe from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key and combination lock - is to be attached to a fixed point in the trunk with a stainless steel wire loop. This safety box is available in different sizes with different lids for different requirements. Standard equipment: Car transport box for hunting guns and hunting equipment Developed in cooperation with US law enforcement agencies - tailored for everyday use Fastening in the vehicle with a wire loop at a fixed point or permanent installation Robust workmanship and strength: 1.3 mm thick steel - welded all around - matt black powder-coated Lid with seal and continuous hinge - powder-coated Lock with security key - if the key is lost, it can also be unlocked with a 10-key combination lock Lid attached with stable continuous hinge - dampers keep lid open Reinforcement embossing on the top - against force and pressure Upholstery of the interior with foam lining External dimension LWH: 91cm * 51cm * 23cm Inside dimension LWH: 90cm * 49cm * 21cm

NOVISauto - SUV trunk and pickup loading areas - safety drawers in different sizes The compact SUV security drawers - permanently installed in the trunk -  from NOVISauto offer convenient protection for your valuables in the vehicle. The thick-walled steel container is very reliable, convenient and securely lockable. Locking and unlocking is done with a double-bit safety key and pressure cylinder. You decide whether the drawer should be conveniently closed or securely locked by pressing the lock. Benefit from a high payload and the option of stacking several drawers on top of each other to save space and connecting them on several levels. Both the drawer and the steel container around it can be loaded with 130kg each. This safety box is available in different sizes for different requirements and vehicles. Double drawer version or stackable version available. Drawer sizes L*W*H outside / inside (volume): Drawer S:      76cm * 90cm * 20cm // 75cm * 73cm * 18cm (99L) Drawer M:     92cm*76cm*30cm (210L) Drawer L:     102cm*76cm*41cm (318L) Drawer XL:     120cm*89cm*41cm (438L) Standard equipment: SUV trunk safety drawer lockable (alternatively can also be installed in the pickup) Fixed installation in the vehicle Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated Heavy - duty drawer 130kg load - very smooth and easy movement thanks to sealed ball bearings Entire safe can be loaded with 130kg (stackable or double drawer system 250kg) Drawers can be stacked and used "multi-level" in the pickup or SUV trunk Drawer can be equipped with additional lashing points on the outside Lock with double bit - safety key and pressure cylinder Drawer is secured and snaps closed / locking by pressing the lock cylinder Foam padding or dividers available

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

NOVISauto - Pickup high-performance safety drawers for full-size pickups in different sizes The large heavy-duty security drawers - permanently installed in the pick-up cargo area - offer comfortable protection and at the same time organized storage space for your valuables in the vehicle. The thick-walled steel container is extremely durable and securely lockable. Locking and unlocking is done with a double-bit safety key and pressure cylinder. You decide whether the drawer should be conveniently closed or securely locked by pressing the lock. Alternatively, a combination lock for keyless access can be installed in the ergonomic handle. Benefit from a high payload and the option of attaching lashing points to the top of the drawer. This offers more usable space and an extended payload of up to 900kg. The system has two drawers, each of which can be loaded with approx. 240kg and can be pulled out by up to 80%. Pre-punched holes make it easy to install partitions. Standard equipment: Pickup high-performance drawer system, securely lockable and weatherproof Fixed installation in the vehicle Robust workmanship and strength: 1.3mm thick hardened steel - welded all around - matt black powder-coated Heavy - duty drawer 240kg load - very smooth and easy movement thanks to sealed ball bearings - each system has two of these drawers Punching in the drawers for the installation of dividers Entire safe can be loaded with 910kg Drawer can be equipped with additional lashing points on the outside Double-bit lock - security key and pressure cylinder (optional with additional combination lock) Drawer is secured and snaps closed / locking by pressing on the locking cylinder Model selection -  Length x width x height (external dimensions / internal dimensions per drawer): Size S1:     1575mm * 1215mm * 255mm // 1465mm * 545mm * 160mm Size S2:     1575mm * 1215mm * 355mm // 1465mm * 545mm * 260mm Size M1:    1830mm * 1215mm * 225mm // 1720mm * 545mm * 160mm Size M2:    1830mm * 1215mm * 355mm // 1720mm * 545mm * 260mm Size L1:     2335mm * 1215mm * 225mm //  2230mm*545mm*160mm Size L2:     2335mm * 1215mm * 355mm // 2230mm * 545mm * 260mm

NOVISauto US hardtop series CX Evolve for Jeep Gladiator 2020+ NOVISauto  hardtop  Model CX EVOLVE . Classic function meets modern design.  That  NOVISauto Hardtop CX Evolve  for the Jeep Gladiator from year of construction 2020 offers excellent workmanship and visual highlights, a stylish and functional hardtop for your Gladiator and other US pickups. The stylistic feature is the frameless glass rear door, the shape of which is perfectly matched to your Jeep Gladiator. With the CX Evolve, NOVISauto offers the gladiator one of the most beautiful options for transporting bulky loads and large pieces of luggage protected from the weather and unauthorized access. The tinted side windows are designed as half-sliding windows in a black aluminum frame, the tailgate, also tinted, is frameless and made entirely of molded glass that is perfectly matched to your vehicle. The window connects seamlessly to the tailgate of the Jeep Gladiator pickup without a contour strip or plastic end cap. The tailgate is equipped with gas pressure dampers, it is closed with an innovative handle that is easy to operate with one hand and can be connected to the vehicle's central locking system. The windscreen allows a clear view to the rear. The inside of the CX Evolve hardtop is lined with anthracite-colored synthetic fleece, which is particularly hard-wearing and easy to clean. In the standard configuration, the CX Evolve hardtop has a 12V LED interior light with a hidden magnet - automatic switch. The NOVISauto Hardtop CX Evolve can be easily and conveniently installed on the vehicle using the clamping system. The required mounting material is included in the scope of delivery. The shipment will be made to the specified delivery address. Installation is also possible with us as an option. Material:  The hardtop shell is made of glass fiber reinforced plastic (GRP) - making it particularly robust and resilient. Paintwork:  In body color, optionally with off-road protective coating in matt black Sidewindow:  Side sliding windows  are in the black aluminum frame  our standard version, for which you can also order a dog guard. As a further option, you have the choice between side glass flaps with lift dampers, which can also be supplied with a sliding window function, and side flaps made of aluminium. Front window:  A fixed windscreen is installed in the standard version. The version as a front sliding window or as a front folding window is available with or without a sliding function  also available. rear door:  The tailgate is frameless, made of all-glass and shaped exactly to match your vehicle  THE  Highlight of the CX Evolve, of course equipped with gas pressure dampers. In addition, the tailgate is no longer visually disturbed by screw connections and bolts - the pane is designed in the SUV style. The hinges of the tailgate are hidden inside and consist of a 6mm thick, extremely stable sheet metal. For your greater convenience, you can connect the tailgate to the vehicle's central locking system and lock the hard top with a push of your vehicle keys. Inner space:  heaven  made of anthracite-colored needle felt, robust and easy-care Interior lighting:  In addition to the standard built-in 12V LED interior light with automatic switch and wiring harness, a centrally mounted light bar or two light bars mounted on the right and left can also be installed. Uncomplicated assembly  without drilling using special clamps mounting material and instructions  included

NOVISauto US Hardtop CX Classic for Jeep Gladiator 2020+ NOVISauto  Hardtop CX Classic -  the name says it all: the hardtop CX Classic combines strength, style and function.  An excellent processing quality and solid construction are also characteristic of the  NOVIS Auto Hardtop CX Classic  such as optical highlights and constructive extras.  That  US hardtop CX Classic  offers a stylish and functional hardtop for your new Gladiator and other US pickups such as Ford F150, Ford Ranger,  toyota Tundra,  gmc,  Chevy Colorado and others. Stability and functionality, design and construction of the hardtop contribute to an overall harmonious SUV style that is popular. the  Hardtop CX shell  Classic  is made of repair-friendly  Fiberglass (GfK) manufactured in the tried and tested multi-layer structure, corners and edges are additionally reinforced. The rear door made of tinted safety glass offers a clear view to the rear. The continuous hinge, which extends across the entire width of the tailgate, proves to be extremely resilient in everyday use, while the aluminum frame also ensures stability. The tailgate is locked with a simple T-handle.  the  Side windows of the CX Classic  are also tinted and have an aluminum frame in black. the  Plastic elements in the corners serve as protection and decoration at the same time. The standard equipment has this  NOVISauto  Hardtop CX Classic  via side sliding windows half the width of the window, which can be supplemented with a protective grille fitted on the inside. The generously dimensioned front window has a fixed pane as standard, but can also be supplied as a sliding or folding window or as a folding window with a sliding function. We have summarized the numerous configuration options for front and side windows for you below.  The interior of the  NOVISauto  Hardtop CX Classic  is  lined with light fiberglass with a textured finish that is durable and easy to clean.  In the standard configuration, the hardtop CX  Classic for the Jeep Gladiator has a battery-operated LED interior light, a 12V LED interior light with automatic switch and wiring harness is also available as an option.  The assembly of the NOVISAuto Hardtop CX  Classic on the Jeep Gladiator 2020+ is easy and comfortable with the clamp system. The required mounting material is included in the scope of delivery. We will ship to the specified delivery address. Installation in our house is also possible as an option. Material:  Shell is made of glass fiber reinforced plastic (GRP)  Paintwork:  In body color, optionally with off-road protective coating in matt black Sidewindow:  Side sliding windows, tinted, in an aluminum frame, with corner reinforcement, alternatively: side aluminum or glass flaps, also with sliding window function Front window:  Fixed windscreen - optional front folding window for easier cleaning or front folding window with additional integrated sliding window or front sliding window rear door:  Black aluminum frame, continuous hinge, gas pressure damper for comfortable operation  Inner space:  Smoothly sanded GfK structure, hard-wearing and easy to care for Interior lighting:  Battery-operated LED interior light without automatic, alternatively NOVISauto offers the equipment with 12V LED interior light with automatic switch and wiring harness; In addition, a centrally mounted light bar or two light bars can be mounted on the right and left. Uncomplicated assembly  without drilling using special clamps mounting kit and instructions  included