NOVISauto AutoSafe portable tablet security box for vehicles
for all vehicles - flexibly installed
€393.88
Product information "NOVISauto AutoSafe portable tablet security box for vehicles"
Tablet security box for fixed or flexible installation in vehicles
- Unique tablet safe for installation in all vehicles with enough space
- Flexible installation : Reinforced steel sling, black coated, for attaching to a fixed point without screw connection or drilling - tensile load up to 1000kg - length 65cm.
- Fixed installation: Pre-drilled holes on the steel box for attaching to solid surfaces with screw connection
- Use : Electronic lock (e.g. tablet or mini-laptop), valuables lock for travelers and camping, fleet needs
- Robust workmanship and strength : Box welded from 1.3 mm steel plates - powder-coated
- Lid with seal : Continuous stable hinge - including removable hinge lock (connects full opening of the lid)
- Power supply & data exchange: passages on the cover for power and data cables
- Padding: Foam pads prevent damage and shifting of the contents
- Closure: 3-digit combination lock with twist lock - double steel bar inside
- External dimensions: 355mm length // 270mm width // 45mm height
- Internal dimensions: 330mm length // 205mm width // 25mm height
Excursus : In 2019, 222,129 thefts from motor vehicles were registered in Germany (statista.com). If a mobile phone, wallet or other items are clearly visible in the car at the time of the theft, the injured party must pay for the damage themselves. Aside from the obvious cost of replacing expensive laptop computers, the loss of sensitive data can also be devastating. Our manufacturer has been producing high-quality security products for over 20 years and has established itself as a world leader in automotive security. Benefit from this expertise!
Our LOCKBOX-AutoSafe is specially designed to provide a safe and secure place for portable computers and other valuables in the car. The thick foam lining protects the contents from shaking and shifting during transport. The LOCKBOX car safe can be installed in any vehicle in a suitable place. Our lockboxes are suitable for most valuables and tablets - therefore check the size of your device before ordering:
The stable LOCKBOX car safe is made of 1.5 mm thick steel, with a tight-fitting lid that is twice as thick for extra stability thanks to beading at the edge. The unique construction includes an intricate hinge system and welded steel construction. The included Grade 8 hardware has mounting holes for either floor or flush mounting, allowing the LOCKBOX-AutoSafe to be mounted behind the back seat in a pickup truck or virtually any other location.
The exterior is unobtrusively presented in black with a hard-wearing, textured powder coating.
It is closed using the patented 3-digit combination lock with a rotary function. As an alternative, a pressure cylinder lock or a cylinder lock with a security key can also be requested.
| Construction year: | 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, Older years of construction |
|---|---|
| Make/Model: | Chevrolet Silverado, Dodge RAM, Dodge Ram CLASSIC, Fiat Fullback, Ford F150, Ford Ranger, GMC Sierra, Isuzu D Max, Iveco Daily, Jeep Wrangler, Mercedes Sprinter, Mercedes X class, Mitsubishi L200, Nissan Navara / Frontier, Renault Alaskan, SsangYong Acyton/Musso, Tata Xenon, Toyota Hilux, Toyota Tundra, VW Amarok, Volkswagen Crafter, jeep gladiator |
Sicherheitsblatt
Tuffy Security Products
25733 Road H
Cortez, CO 8132
Vereinigte Staaten
Novisauto Talring 118
47802 Krefeld
info@novisauto.de
-
Where can I get additional information?Contact our customer service for intensive advice on all your questions and the configuration options.
Do you have any questions or need further information? Then please give us a call.
Expert advice by phone +49 (0) 2151-393593 or by e-mail: info@carryboy.de
Weitere Tresore
NOVISauto - AutoSafe / lockable storage box for valuables for permanent installation in the trunk The trunk security box from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is permanently attached to the vehicle and offers optimal protection for documents, tablets, laptops, cash and much more. The generous storage space including a shelf for small items offers space for all kinds of items. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. Standard equipment: Unique trunk safe for installation in all vehicles with enough space Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable safety box for valuable tools / hunting equipment Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated Lid with seal and continuous hinge - powder-coated Integrated storage compartment for small items 225mm length // 160mm width // 75mm height Closure: Pryguard pressure lock with security key and weather seal. The box can either be simply closed or firmly locked by pressing the lock. Then it can only be opened with a key. External dimensions: 245mm length // 860mm width // 290mm height Inside dimensions: 230mm length // 840mm width // 280mm height
NOVISauto - LOCKBOX - AutoSafe for permanent installation The compact security box from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is permanently attached to the vehicle and offers optimal protection for documents, tablets, laptops, cash and much more. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. Standard equipment: Unique vehicle safe for installation in all vehicles with enough space Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools Robust workmanship and strength: 1.3 mm thick steel - welded all around - matt black powder-coated Lid with seal and continuous hinge - powder-coated Standard lock: Exclusive lock for double-bit keys with 10 tumblers Alternative lock: 3 digit combination with rotary lock without key (see accessories) External dimensions: 159mm length // 400mm width // 257mm height Internal dimensions: 146mm length // 384mm width // 248mm height
NOVISauto - Pickup high-performance safety drawers for full-size pickups in different sizes The large heavy-duty security drawers - permanently installed in the pick-up cargo area - offer comfortable protection and at the same time organized storage space for your valuables in the vehicle. The thick-walled steel container is extremely durable and securely lockable. Locking and unlocking is done with a double-bit safety key and pressure cylinder. You decide whether the drawer should be conveniently closed or securely locked by pressing the lock. Alternatively, a combination lock for keyless access can be installed in the ergonomic handle. Benefit from a high payload and the option of attaching lashing points to the top of the drawer. This offers more usable space and an extended payload of up to 900kg. The system has two drawers, each of which can be loaded with approx. 240kg and can be pulled out by up to 80%. Pre-punched holes make it easy to install partitions. Standard equipment: Pickup high-performance drawer system, securely lockable and weatherproof Fixed installation in the vehicle Robust workmanship and strength: 1.3mm thick hardened steel - welded all around - matt black powder-coated Heavy - duty drawer 240kg load - very smooth and easy movement thanks to sealed ball bearings - each system has two of these drawers Punching in the drawers for the installation of dividers Entire safe can be loaded with 910kg Drawer can be equipped with additional lashing points on the outside Double-bit lock - security key and pressure cylinder (optional with additional combination lock) Drawer is secured and snaps closed / locking by pressing on the locking cylinder Model selection - Length x width x height (external dimensions / internal dimensions per drawer): Size S1: 1575mm * 1215mm * 255mm // 1465mm * 545mm * 160mm Size S2: 1575mm * 1215mm * 355mm // 1465mm * 545mm * 260mm Size M1: 1830mm * 1215mm * 225mm // 1720mm * 545mm * 160mm Size M2: 1830mm * 1215mm * 355mm // 1720mm * 545mm * 260mm Size L1: 2335mm * 1215mm * 225mm // 2230mm*545mm*160mm Size L2: 2335mm * 1215mm * 355mm // 2230mm * 545mm * 260mm
The handy and compact solution for your valuables that you always want to carry with you. The valuables box from NOVISauto offers versatile protection for these items. Benefit from safe storage with maximum mobility at the same time. The portable valuables cassette is supplied with a holder for the vehicle. Additional holders, for example for installation in the house, in the caravan or elsewhere, are available from us. The safe cassette can be pushed into the holder and secured. To take the closed cassette with you, it can be removed from the holder again. The cassette can be stored elsewhere in another holder without opening it. Ideally suited as hunting equipment for the vehicle. Are you obliged to remove all valuables from the car or to keep them safe? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, campers and pickups - residential structures. The only condition for installation: There must be enough space to hold the security cassette. Standard equipment: Portable slide-in cassette including a holder for permanent installation Install Bracket: Bolt to vehicle or other suitable surface with SAE J429 Grade 8 Fastening Kit (High Tensile Alloy Steel) Usage: Ideal for hunting or for locking valuables that you carry with you Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated Padded inside with foam Lid with seal and continuous hinge - including hand strap Standard lock: Exclusive lock for double-bit keys with 10 tumblers Alternative closure: Additional pressure cylinder lock for quick opening of the box External dimensions: 230mm length // 255mm width // 76mm height Inside dimensions: 155mm length // 240mm width // 50mm height
NOVISauto - automobile transport box for hunting weapons / tools When transporting rifles, firearms, but also hunting knives with a long blade, it must be ensured that these are not readily accessible. The requirement is met if the gun is in a locked container - for example in one of our car gun boxes or in a gun transport box. These reliably hide the hunting rifle from the eyes of third parties. The compact automotive hunting gun safe from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key and combination lock - is to be attached to a fixed point in the trunk with a stainless steel wire loop. This safety box is available in different sizes with different lids for different requirements. Standard equipment: Car transport box for hunting guns and hunting equipment Developed in cooperation with US law enforcement agencies - tailored for everyday use Fastening in the vehicle with a wire loop at a fixed point or permanent installation Robust workmanship and strength: 1.3 mm thick steel - welded all around - matt black powder-coated Lid with seal and continuous hinge - powder-coated Lock with security key - if the key is lost, it can also be unlocked with a 10-key combination lock Lid attached with stable continuous hinge - dampers keep lid open Reinforcement embossing on the top - against force and pressure Upholstery of the interior with foam lining External dimension LWH: 89cm * 31cm * 13cm Inside dimension LWH: 87cm * 29cm * 13cm
NOVISauto - SUV trunk and pickup loading areas - safety drawers in different sizes The compact SUV security drawers - permanently installed in the trunk - from NOVISauto offer convenient protection for your valuables in the vehicle. The thick-walled steel container is very reliable, convenient and securely lockable. Locking and unlocking is done with a double-bit safety key and pressure cylinder. You decide whether the drawer should be conveniently closed or securely locked by pressing the lock. Benefit from a high payload and the option of stacking several drawers on top of each other to save space and connecting them on several levels. Both the drawer and the steel container around it can be loaded with 130kg each. This safety box is available in different sizes for different requirements and vehicles. Double drawer version or stackable version available. Drawer sizes L*W*H outside / inside (volume): Drawer S: 76cm * 90cm * 20cm // 75cm * 73cm * 18cm (99L) Drawer M: 92cm*76cm*30cm (210L) Drawer L: 102cm*76cm*41cm (318L) Drawer XL: 120cm*89cm*41cm (438L) Standard equipment: SUV trunk safety drawer lockable (alternatively can also be installed in the pickup) Fixed installation in the vehicle Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated Heavy - duty drawer 130kg load - very smooth and easy movement thanks to sealed ball bearings Entire safe can be loaded with 130kg (stackable or double drawer system 250kg) Drawers can be stacked and used "multi-level" in the pickup or SUV trunk Drawer can be equipped with additional lashing points on the outside Lock with double bit - safety key and pressure cylinder Drawer is secured and snaps closed / locking by pressing the lock cylinder Foam padding or dividers available
Anderes Zubehör
NOVISauto - edge protection for the pickup tailgate of your Ford Ranger from year of construction 2012+ Effectively and inexpensively protect the scratch-prone upper edge of the tailgate of your 2010-2020 Ford Ranger! The NOVISAuto protective strip for the Ford Ranger tailgate offers long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in loading space liner without edge protection or if the loading space is protected with a coating - because the edges of the loading area are still unprotected with both systems! The protective cap / rubbing strip for the Ford Ranger tailgate was developed for lasting protection against scratches, dents and dents. A close fit with smooth machined edges and durable plastic material make our Ford Ranger Edge Cover Moldings an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.
NOVISauto care spray "TONNO TONIC" for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step - it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers. Remember to take care of your cover regularly! - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.
Load compartment liner lower edge for Nissan Navara D40 double cab (long bed 161cm) Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Tailgate protection with edge included Economical in daily use, as it protects the paintwork at low cost Accesories Tailgate protection included assembly description with the necessary mounting accessories
Load compartment liner lower edge for Nissan Navara D40 double cab (long bed 161cm) Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Tailgate protection with edge included Economical in daily use, as it protects the paintwork at low cost Accesories Tailgate protection included assembly description with the necessary mounting accessories
Equip your Ford Ranger extra cab (Spacecab), double cab or single cab (Singlecab) built in 2023+ with a CARRYBOY tailgate damper 111. Increase the usability of your pickup and increase comfort. With accessories from the Comfort & Ease of Use section. Ford Ranger accessories seamlessly adapt to your vehicle. Opt for a bespoke accessory that comes with a mounting kit and installation instructions. If you have any questions, you can contact us at any time. If you wish, we would be happy to professionally assemble the accessories for you. Take advantage of our strong CARRYBOY accessory model tailgate damper 111 from Carryboy for your Ford Ranger extra cab (Spacecab), double cab or single cab (single cab) built in 2023+. Your advantages summarized: for Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab), single cab (Singlecab) year of construction from 2023+ CARRYBOY accessories manufactured by CARRYBOY Accessories designed for comfort & ease of use - black Mounting type: screws approximate assembly time: 10 min special feature: easy opening and high compatibility particularly suitable for: convenient use and simple application Attaches to tailgate and side Storage space approx. 0.5 m³ Our recommendation for your Ford Ranger Extra Cab (Spacecab), Double Cab, Single Cab (Singlecab) Our first-class CARRYBOY accessory tailgate damper 111 from Carryboy for your Ford Ranger 2023+ extra cabin (Spacecab), double cabin or single cabin (Singlecab) is suitable for every purpose! It is an ideal accessory for convenient use and easy application. Use the accessories for leisure and business! Best service - before and after the purchase You can rely on our service! Uncertainties or questions? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Are you concerned about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our accessories to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production. More comfort and increased user-friendliness with CARRYBOY tailgate dampers 111 The accessory Carryboy tailgate damper 111 is delivered in black . The Carryboy CB-111-FT tailgate damper gas pressure spring is installed on the tailgate, on the side . The approximate installation time is 10 minutes on your Ford Ranger. Mounting with screws allows for better stability of the accessories. The accessory is particularly secure thanks to screws. The special features of the accessories are: easy opening and high compatibility . Convenient to use and easy to use : in summary, the CARRYBOY tailgate damper 111 accessory for your Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab) or single cab (Singlecab) from 2023+ is particularly suitable for this.
CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Ford Ranger 2012+ for Ford Ranger 2012+ Double Cab / Extra Cab / Single Cab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate
CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Isuzu D-Max 2021+ for Isuzu D-Max 2021+ Double Cab / Spacecab / Singlecab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate
CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Isuzu D-Max 2021+ for Isuzu D-Max 2021+ Double Cab / Spacecab / Singlecab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate
CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber basis for Mitusbishi L200 / Fiat Fullback 2016+ for Mitsubishi L200 / Fiat Fullback 2016+ Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate
CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Toyota Hilux 2016+ for Toyota Hilux 2016+ / 2021+ Invincible Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate