NOVISauto load compartment cover ProX - tarpaulin for rolling - TXR09
Dodge RAM Bj. 2009-2018 / Dodge RAM Classic from Bj. 2019+
€880.01
Product information "NOVISauto load compartment cover ProX - tarpaulin for rolling - TXR09"
Expand your Dodge Ram double cab with a high-quality load compartment cover from NOVISauto. The PX15 cover is a weather and wear resistant vinyl tarpaulin and offers 100% full access to the entire cargo area. The Px15 tonneau cover impresses with its ultra-low profile and aerodynamic design - the black-colored aluminum arches and side rails complete the look. Thanks to the unique clamping system, installation is child's play and requires no drilling. Equip your Dodge Ram with the high-quality PX15 cover type tarpaulin to roll up and save up to 15% on fuel costs. The cover is the ideal multifunctional solution for unlimited use of your pickup truck! Supplied with assembly kit and installation instructions.
PX15 is a "tarpaulin-to-roll" tonneau cover - you save 10-15% on fuel costs!
The PX15 cover can be rolled up to the cabin and offers 100% full access to the entire cargo area. The PX15 tonneau cover impresses with its ultra-low profile and aerodynamic design - the black aluminum arches and side rails complete the look. Thanks to the unique clamping system, installation is child's play and requires no drilling. The tonneau cover can be easily removed and reinstalled in seconds to allow full flexibility and access to your tonneau area. With the automatic tensioning piston, your tonneau cover stays in place even when temperatures fluctuate, so your cargo and your tonneau area remain dry even in extreme weather. The PX15 cover allows you to easily open and close the tailgate - even with the cover open or closed. Due to the flat, low-profile design of the cover, the "pure" pickup look is retained. The PX15 cover is the ideal multifunctional solution for unlimited use of your pickup truck!
| Construction year: | 2023, 2024, 2025, 2026 |
|---|---|
| Make/Model: | Ford Ranger, VW Amarok |
| ⓘ Cross arches/slats: | Aluminium, automatic rewinding |
| ⓘ Frame: | side rails |
| ⓘ Height above edge of cargo area: | flat, mounted on inner edge |
| ⓘ Latch and lock: | Velcro fastener |
| ⓘ Loading area fully accessible: | yes |
| ⓘ Materials: | Woven fabric: black - impregnated |
| ⓘ Surface finish: | fabric: matt black |
| ⓘ approximate assembly time: | 30 min |
| ⓘ can only be unlocked from the inside: | yes |
| ⓘ control: | manual |
| ⓘ installation type: | clamps, no drilling |
| ⓘ keep open while driving: | yes |
| ⓘ particularly UV-resistant: | yes |
| ⓘ particularly suitable for: | professional |
| ⓘ special feature: | high quality woven fabric, ultra flat |
| cabin length vehicle: | double cab |
| type of coverage: | Tarpaulin to roll up |
Sicherheitsblatt
RealTruck
Pedersholmparken 10
3600 Frederikssund
Denmark
Novisauto Talring 118
47802 Krefeld
info@novisauto.de
-
What is the difference of the different folding covers?Visit our download center and download the comparison table to see the exact differences quickly and easily.
-
Are the covers stable?Yes, the covers are all made of sturdy material. The different models are designed for different weight classes. Please inquire with sales.
-
With which over-edge tubs can the load compartment cover be fitted?In the case of ultra-flat folding covers, mounting with edge protection is not recommended. All other tubs and spray coatings can be combined. For glued-on protective edges and over-edge trays, we recommend the Solid Fold or Rugged Cover model.
-
How long do I need for assembly?45-60 minutes
-
Can I combine the folding covers with a roll bar, styling bar or front protection grilles?No with manufacturer bracket. However, we do offer brackets that can be combined with some of our flat covers.
Do you have any questions or need further information? Then please give us a call.
Expert advice by phone +49 (0) 2151-393593 or by e-mail: info@carryboy.de
Rhiem Detail Compare
CARRYBOY - Load compartment cover GRX cover with stainless steel bracket for Ford Ranger double cab (years of construction 2012+ / 2019+) with painted roll bar / protective bar with stainless steel inserts can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in white primer, also available in body color securely lockable - two keys incl. locks the entire loading area Save up to 15% on fuel with CARRYBOY Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The GRX cargo area cover from CARRYBOY for the Ford Ranger double cab is a stylish, but at the same time functional cover. This Ford Ranger accessory combines the appealing element of a painted tonneau cover with a polished stainless steel styling bar for contrast. The optimal mix for the most elegant design on the market! The flat cover GRX for the Ranger double cab adapts seamlessly to the vehicle thanks to the paint finish in the vehicle color. The edges of the load compartment lid are curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. Wraparound seals wrap around the cargo area of your Ford Ranger vehicle, keeping water and dust out of the cargo area. Rain drains freely over the lid on the edge of your Ford Ranger double cab pickup. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX tonneau cover for the Ford Ranger is made in one piece together with the roll bar, there are no rattling parts, unnecessary places for water entry or unsightly seams. The cargo area of your Ford Ranger double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights ensures good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Ford Ranger accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX tonneau cover for the Ford Ranger double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer. Please note: Although this Ford Ranger accessory fits all Ranger double cab truck beds, it is not compatible with the Limited and Wildtrak uprights. The front protection grille on the XL and XLT models must be removed. The GRX styling bar is mounted in place of the bar mentioned. In this no brake light is embedded! On the XL and XLT, the brake light is mounted on the driver's cab and is visible with the roll bar. The Limited and Wildtrak no longer have this brake light after installation. The brake light is no longer required if the vehicle is registered as a truck.
Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener for Ford Ranger double cab from year of construction 2012 (also 2019+) Cargo area tarpaulin - plastic-laminated, waterproof and robust Installation on loading sill, ideal for building with over edge - loading space tub weatherproof and moisture resistant The tarpaulin is attached with Velcro / can be driven open Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses detailed assembly description - assembly kit included The CARRYBOY cargo area cover of the vinyl tarpaulin type for the Ford Ranger double cab from year of construction 2012 combines ease of use with an unbeatable price-performance ratio. The load compartment tarpaulin for the Ford Ranger double cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Ford Ranger double cab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality lightning fasteners reliably secure the tarpaulin for the loading area of the Ranger double cab, so that it is also possible to drive with the tarpaulin open. The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the Ford Ranger pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your Ford Ranger double cab loading area. All-round seals reliably keep the elements away from the cargo area. The Carryboy CB-743 soft lid for the Ford Ranger double cab (2012+) can be combined with the current design of the loading area, which has remained unchanged since 2012 and beyond 2019. Water that collects on the vinyl tarpaulin for the Ford Ranger is reliably drained off via the anodised aluminum frame - this keeps the loading area dry. An installation without drilling is possible for all Ford Ranger vehicles with an overhang tub. However, installation with brackets or front protection grilles cannot be carried out. Please note that the Carryboy Softlid CB-743 must be attached directly to the loading sill for installation without an overedge. We recommend blind rivet nuts for this. As an alternative to shipping the tarpaulin, we also offer an on-site installation service.
CARRYBOY - Load compartment cover lid with motor lift SMX2-FTD for Ford Ranger double cab from year of construction 2012 Two electric motors raise the cover to cabin height Save up to 15% on fuel thanks to aerodynamics Thanks to GRP, the cover is robust in everyday use ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses Paintwork in body color possible lockable - two keys incl. Connection to the central locking of the driver's cab Lid can be moved open Suitable for transporting tall objects
Carryboy Roller Lid aluminum roller blind roll cover CB-789-FTD for Ford Ranger Double Cab 2023+ Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with lower edge - load compartment tub detailed assembly description - assembly kit included only suitable without front protection grille, stainless steel bar or Wildtrak bar The Rollerlid 789 for the Ford Ranger double cab is an aluminum roller blind for retrofitting on your Ford Ranger double cab. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not essential. The aluminum roller blind from CARRYBOY for the Ford Ranger double cab is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The ergonomic grip strip for operating the Ford Ranger roller blind has a good grip thanks to the ribbing - even in wet weather! The Rollerlid 789 for the Ranger double cab is installed flat at the height of the loading sill. Rainwater that falls on the Ford Ranger's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Ford Ranger double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Ford Ranger accessory.
Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you! Our CARRYBOY cargo area cover model 789 from Carryboy offers you many advantages compared to a bare cargo area platform and is therefore a useful addition to your double cab pickup Ford Ranger 2012+. Benefit from our strong CARRYBOY cargo area cover model 789 from Carryboy for your Ford Ranger double cab year of construction 2012 - 2022. The Ford Ranger cargo area cover adapts seamlessly to your vehicle. High-quality design - keep your beloved pick-up style and appearance and give your cargo area that little something extra! Best protection against rain and dirt - that is one of the advantages of our load compartment cover. Opt for a tailor-made tonneau cover that comes with a fitting kit and installation instructions. If you have any questions, you can contact us at any time. We can take over the professional construction of the cargo area cover if required. Our employees are technically adept, professionally competent and have practical experience ! Benefit from our strong Carryboy cargo area cover model 789 for your Ranger double cab built between 2012 and 2022. The advantages of the load compartment cover at a glance: for Ford Ranger double cab (Doublecab) year of construction 2012 - 2022 CARRYBOY trunk cover manufactured by CARRYBOY Material: aluminum Operation: manual special feature: versatile and flat cover at the height of the loading area particularly suitable for: leisure and business mobile when open on approx. inside edge line Loading area fully accessible Type of mounting: mounting rails and brackets Transverse arches/slats: aluminium Frame: side rails Tension control: automatic approximate assembly time: 45-60 min Latch & Closure: Two-point latch - Black slats Our recommendation for your Ford Ranger double cab Our first-class CARRYBOY cargo area cover 789 from Carryboy for your Ford Ranger 2012 - 2022 double cab is suitable for every purpose! It is an ideal tonneau for leisure and business, for protecting and transporting everyday goods. Use the cover for leisure and business! We recommend a fixed tonneau or roller blind type blind for primarily commercial use. We recommend checking out our tonneau cover comparison charts : https://www.novisauto.de/Downloads-Documents/ Best service from a single source - before and after the purchase Rely on our service! uncertainties? Questions? You can reach us at any time by email or phone! Look forward to detailed and customer-oriented advice . We work every day in the office AND warehouse. We have an extensive wealth of experience over 16 years of practical performance. You can look forward to technically experienced, professionally competent and practically experienced employees. Our spare parts service, which is unique in the industry, offers you spare parts for several years after you have purchased the product! Your Ford Ranger double cab (Doublecab) year of construction 2012 - 2022 is well equipped with our load compartment cover 789. Use your load compartment cover for a lifetime and protect the environment! Cargo area covers from CARRYBOY! Are you concerned about sustainability or long-term use? No problem! A long life and useful life of our cover is made possible by the use of high-quality parts, raw materials and materials. Lifelong use saves valuable resources and leads to sustainability! Quality load compartment cover model 789 for your Ford Ranger - double cab from CARRYBOY The tonneau cover CB-789-B-FTD for your Ford Ranger opens and closes manually . Thanks to the outstanding advantage of an openable load compartment cover 789 from CARRYBOY for the Ford Ranger, you no longer have to think about whether something fits in the load compartment or not. Just charge, leave the cover open, no problem! The load compartment cover can be locked using a two-point lock . This protects your goods from theft, water and dirt. Several keys are supplied for convenient locking and unlocking of your Ranger tonneau cover. The tonneau cover is on approx inside edge line . By installing the cover 789 for your Ford Ranger Doublecab at the inside edge line or on the inside edge line, you will not spoil the general impression of your pickup truck, while increasing the stylistic value and you will not have to choose between looks and protection! Mounting with mounting rails and brackets allows the load compartment cover to be more stable. The load compartment cover is particularly secure thanks to fastening rails and clips. The 789 load compartment cover from CARRYBOY for your Ford Ranger double cab (Doublecab) year of construction 2012 - 2022 is made of aluminum . The load compartment cover Ranger 789 combines low dead weight, robustness, stability and durability as properties and requirements. For this reason, the load compartment covers use aluminum as the material. It will take you approximately 45-60 minutes to fit the cover on your Ford Ranger. The cover has an automatic tension control , so the product always stays tensioned. Load your truck from the sides or the back. Our tonneau cover will not block your access . In summary, the CARRYBOY load compartment cover 789 for your Ford Ranger double cab (Doublecab) 2012 - 2022 is particularly suitable for leisure and commercial use . The special features of the load compartment cover are: versatile and flat cover at the level of the loading area . You can order the Carryboy 789 load compartment cover in black slats .
carryboy Roller Lid Model CB-789F-FTD for Ford Ranger Double Cab 2012+ Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Lateral cross member rails made of aluminum with elegant, robust and painted (anthracite) GRP frame Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with lower edge - load compartment tub detailed assembly description - assembly kit included only suitable without front protection grille or other roll bars The Rollerlid 789F for the Ford Ranger double cab is an aluminum roller blind for retrofitting on your Ranger double cab pickup. The aluminum blind closes evenly with the edge of the tailgate. On the sides of the loading area, it has elegant, gray lacquered sockets for the integrated cross member bracket. The crossbeams can be slid to any position on an aluminum longitudinal beam rail that is integrated directly into the frame. Expand the standard aluminum roller blind for the Ford Ranger double cab with a practical cross member preparation. You get the complete pick-up loading space for smaller items to be transported, while bulky items (e.g. bicycles, roof tent) can be accommodated on the cross members. Due to the wide contact surface of the aluminum roller blind 789F on the loading sill of the Ford Ranger, additional loads can easily be applied to the roller blind via the cross members. The aluminum roller blind from CARRYBOY for the Ford Ranger is available with aluminum-colored slats or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind for the Ranger double cab is particularly robust and resilient. The ergonomic grip strip for operating the Ford Ranger double cab aluminum roller blind has a good grip thanks to the ribbing - even in wet weather! Rainwater that falls on the Ford Ranger's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Ford Ranger double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Ford Ranger accessory.
CARRYBOY - load compartment cover lid GRXR-FTD for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket Ford Ranger Wildtrak accessories - load compartment cover with lid and gas springs for installation with original Wildtrak roll bar, Wildtrak styling bar Only for installation with genuine Ford Ranger Wildtrak roll bar can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in 42A anthracite (color of Wildtrak frame) or with delivery time in vehicle color securely lockable - two keys incl. NOW NEW AS STANDARD: CENTRAL LOCKING OF THE COVER locks the entire loading area securely Save up to 15% on fuel with CARRYBOY Can be used with the original load compartment tub detailed assembly description - assembly kit included Note: The 2019+ Ford Ranger has a cargo area liner with large ridges behind the tailgate. Here the upper part of the bead must be cut off before assembly in order to be able to assemble the cover with an absolutely precise fit. The cut can easily be made with a knife or saw. Behind the bead there is a cavity without cables or sheet metal. The GRX cargo area cover from CARRYBOY for the Ford Ranger Wildtrak double cab from year of construction 2012 is a stylish, but at the same time functional cover. This Ford Ranger Wildtrak Accessory combines the appealing element of a painted tonneau cover with the genuine Ford Ranger Wildtrak Upright. The optimal mix for the most elegant design on the market! Order the GRX cover for the Ranger Wildtrak and the Ford Ranger Raptor in either the standard color of the Wildtrak roll bar or in the body color of your Ford Ranger. The GRX flat cover for the Ford Ranger Wildtrak double cab adapts seamlessly to the vehicle and the Wildtrak bracket thanks to the high-quality paintwork. The edge of the luggage compartment lid on the tailgate is curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. The load compartment cover for the Ford Ranger Wildtrak is pushed directly between the original Wildtrak bracket with fastening rails. Sealing with a sealing seam and the water catcher on the load compartment cover reliably drain rain away from the load area. Water runs into the side channels of the cover and is routed out of the cargo area with drain hoses. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX load compartment cover for the Ford Ranger Wildtrak, Ford Ranger Raptor is made of one piece, there are no rattling parts, unnecessary places for water entry or unsightly seams. Multi-hardened hinges and a thick lamination of the Ford Ranger Wildtrak tonneau cover withstand even the most difficult weather! The cargo area of your Wildtrak double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Ford Ranger Wildtrak accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX tonneau cover for the Ranger Wildtrak and Ranger Raptor double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
CARRYBOY - load compartment cover lid GRXR-FTD for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket Ford Ranger Wildtrak accessories - load compartment cover with lid and gas springs for installation with original Wildtrak roll bar, Wildtrak styling bar Only for installation with genuine Ford Ranger Wildtrak roll bar can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in 42A anthracite (color of Wildtrak frame) or with delivery time in vehicle color securely lockable - two keys incl. NOW NEW AS STANDARD: CENTRAL LOCKING OF THE COVER locks the entire loading area securely Save up to 15% on fuel with CARRYBOY Can be used with the original load compartment tub detailed assembly description - assembly kit included Note: The 2019+ Ford Ranger has a cargo area liner with large ridges behind the tailgate. Here the upper part of the bead must be cut off before assembly in order to be able to assemble the cover with an absolutely precise fit. The cut can easily be made with a knife or saw. Behind the bead there is a cavity without cables or sheet metal. The GRX cargo area cover from CARRYBOY for the Ford Ranger Wildtrak double cab from year of construction 2012 is a stylish, but at the same time functional cover. This Ford Ranger Wildtrak Accessory combines the appealing element of a painted tonneau cover with the genuine Ford Ranger Wildtrak Upright. The optimal mix for the most elegant design on the market! Order the GRX cover for the Ranger Wildtrak and the Ford Ranger Raptor in either the standard color of the Wildtrak roll bar or in the body color of your Ford Ranger. The GRX flat cover for the Ford Ranger Wildtrak double cab adapts seamlessly to the vehicle and the Wildtrak bracket thanks to the high-quality paintwork. The edge of the luggage compartment lid on the tailgate is curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. The load compartment cover for the Ford Ranger Wildtrak is pushed directly between the original Wildtrak bracket with fastening rails. Sealing with a sealing seam and the water catcher on the load compartment cover reliably drain rain away from the load area. Water runs into the side channels of the cover and is routed out of the cargo area with drain hoses. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX load compartment cover for the Ford Ranger Wildtrak, Ford Ranger Raptor is made of one piece, there are no rattling parts, unnecessary places for water entry or unsightly seams. Multi-hardened hinges and a thick lamination of the Ford Ranger Wildtrak tonneau cover withstand even the most difficult weather! The cargo area of your Wildtrak double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Ford Ranger Wildtrak accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX tonneau cover for the Ranger Wildtrak and Ranger Raptor double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
Carryboy aluminum cover roll cover CB-789R for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with the lower edge of the load compartment tub and the original bracket/styling bar detailed assembly description - assembly kit included only suitable with original Ford Ranger Wildtrak bracket PLEASE NOTE: This cover fits all 2012 to present / 2019 to present cargo area liners however are fitted with a large bead on the tailgate. With such tubs, an adjustment is required in order to be able to insert the headband through the bead. The Rollerlid 789R for the Ford Ranger Wildtrak and the Ford Ranger Raptor is an aluminum roller blind for retrofitting on your Ford Ranger with Wildtrak roll bar. The roller blind is installed between the jaws of the Wildtrak styling bar. The roll cover for the Wildtrak is installed on a rail mounting system, which is also included in the scope of delivery. A convenient pull tab allows the blind to be operated from the tailgate. The integrated torsion spring ensures that the blind opens automatically. Latching options on the tailgate and the center of the blind also allow extra-long items to be transported on the loading area. The aluminum roller blind from CARRYBOY for the Ford Ranger Wildtrak is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The rounded surface structure gives the Carryboy aluminum roller blind 789R for the Ford Ranger Wildtrak and Ford Ranger Raptor a unique and extremely elegant look. The Rollerlid 789R for the Ranger Wildtrak and the Ranger Raptor double cab is installed flat at the height of the loading sill. Rainwater that falls on the Wildtrak's loading space is safely kept away from the loading space via drain hoses on the roller blind box and on the tailgate. The CARRYBOY Wildtrak roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate and is therefore a secure and flexible closure. 4 drain hoses, 2 each on the tailgate and 2 on the roller blind box behind the cab of the Ford Ranger Wildtrak allow all water to be drained off comprehensively - for the most effective protection against water and dust.
Carryboy aluminum cover roll cover CB-789R for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with the lower edge of the load compartment tub and the original bracket/styling bar detailed assembly description - assembly kit included only suitable with original Ford Ranger Wildtrak bracket PLEASE NOTE: This cover fits all 2012 to present / 2019 to present cargo area liners however are fitted with a large bead on the tailgate. With such tubs, an adjustment is required in order to be able to insert the headband through the bead. The Rollerlid 789R for the Ford Ranger Wildtrak and the Ford Ranger Raptor is an aluminum roller blind for retrofitting on your Ford Ranger with Wildtrak roll bar. The roller blind is installed between the jaws of the Wildtrak styling bar. The roll cover for the Wildtrak is installed on a rail mounting system, which is also included in the scope of delivery. A convenient pull tab allows the blind to be operated from the tailgate. The integrated torsion spring ensures that the blind opens automatically. Latching options on the tailgate and the center of the blind also allow extra-long items to be transported on the loading area. The aluminum roller blind from CARRYBOY for the Ford Ranger Wildtrak is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The rounded surface structure gives the Carryboy aluminum roller blind 789R for the Ford Ranger Wildtrak and Ford Ranger Raptor a unique and extremely elegant look. The Rollerlid 789R for the Ranger Wildtrak and the Ranger Raptor double cab is installed flat at the height of the loading sill. Rainwater that falls on the Wildtrak's loading space is safely kept away from the loading space via drain hoses on the roller blind box and on the tailgate. The CARRYBOY Wildtrak roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate and is therefore a secure and flexible closure. 4 drain hoses, 2 each on the tailgate and 2 on the roller blind box behind the cab of the Ford Ranger Wildtrak allow all water to be drained off comprehensively - for the most effective protection against water and dust.
Laderaumabdeckungen VW Amarok
Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener for Volkswagen Amarok Double Cab 2010-2020 Cargo area tarpaulin - plastic-laminated, waterproof and robust Elegant knobbed finish on the surface Anodized aluminum frame with integrated tarpaulin Fixation of the rolled up tarpaulin on three belt buckles All-round seals against water ingress into the cargo area Tarpaulin can be opened from the outside weatherproof and moisture resistant Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use Can be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The CARRYBOY cargo area cover of the vinyl tarpaulin type for the VW Amarok double cab from year of construction 2010-2020 combines ease of use with an unbeatable price-performance ratio. The load compartment tarpaulin for the Amarok double cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Volkswagen Amarok double cab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality quick-release fasteners reliably secure the tarpaulin for the loading area of the Amarok double cab, so that it is also possible to drive with the tarpaulin open. The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the VW Amarok pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your VW Amarok double cab loading area. All-round seals reliably keep the elements away from the cargo area. The load compartment cover 743 of the type "tarpaulin for rolling up with Velcro" has been specially developed for installation with an over-edge load compartment tub. For VW Amarok vehicles without a load compartment liner with edge protection, we recommend a consultation in advance. Installation without drilling is only possible with a trough of the type mentioned. Installation on the Amarok without a tub is also possible. For professional installation in a specialist workshop or on your own, we recommend using blind rivet nuts. Detailed assembly instructions are included.
NOVISauto cargo area cover tarpaulin TRIFECTA for folding for the Volkswagen Amarok Double Cab 2010-2020 Vinyl tarpaulin "Trifecta" for folding Precise processing and selected, resilient materials Thick, high-quality "Heavy Duty" tarpaulin in black with imitation leather embossing Seams secured several times also withstand permanent loads Anodized and black coated aluminum frame Installation without tools within 5 minutes Easy to use with a spring lock Quality seals all around Cover rests on the sill - the seals ensure reliable protection against water and dust Double axle - hinges for commercial use - are not subject to the weather as they are installed under the tarpaulin and protected with seals Lockable with tailgate lock Can be driven open and locked with a convenient lightning bolt buckle Trust our service: even years later you will receive the right spare parts!
LoPro for the Volkswagen Amarok double cab 2010-2020 is a "tarpaulin to roll up" type load compartment cover - you save 10-15% on fuel costs! The LoPro cargo area cover for the VW Amarok can be rolled up to the cabin and offers 100% full access to the entire cargo area. The special feature of this unique Volkswagen Amarok luggage compartment tarpaulin: The LoPro impresses with its ultra-flat profile and aerodynamic design - the black-colored aluminum arches and side rails complete the look. The high-quality vinyl tarpaulin has multiple secured side seams. Signs of aging after a few months are not to be expected with the LoPro due to the materials used. You can still give the tarpaulin cover additional care with the specially developed "Tonno Tonic" care spray. The spray for the luggage compartment cover is available in our shop. Thanks to the unique clamping system, installation on the Volkswagen Amarok double cab is child's play and requires no drilling. The tarpaulin for the Amarok double cab is installed flush with the loading sill. The tonneau cover can be easily removed and reinstalled in seconds with a click system to allow full flexibility and access to your tonneau area. With the automatic tensioning piston, your Amarok tarpaulin flat cover remains taut even when the temperature fluctuates, so that your transported goods and your cargo area stay dry even in extreme weather. Backwater on the Volkswagen Amarok vinyl cover has no chance. The tarpaulin, which is always taut, drains the water from the loading area. It can drain freely over the sides of the luggage compartment cover. The VW Amarok cover "LoPro" allows you to open and close the tailgate without any problems - thanks to the multifunctional rubber seal, which also represents an effective barrier against rainwater and dust. The LoPro luggage compartment cover for the VW Amarok can only be unlocked from the inside using the operating lever. The cargo area can be completely locked using the lock on the tailgate. The flat, low-profile design of the load compartment cover preserves the "pure" pickup look. The LoPro cover is the ideal multifunctional solution for unlimited use of your VW Amarok pickup truck!
FLEX is a "tight-to-fold" cover, the optimal solution for your pickup truck. For the Volkswagen Amarok double cab from year of construction 2010. With the FLEX load compartment cover for the VW Amarok, you can drive safely on long stretches of motorway and off-road with the cover closed and open. FLEX is easy to disassemble, requires no drilling during assembly, and sits flat and flush on the top edge of the cargo box. The FLEX flat cover is the "tight-to-fold" cover that protects your luggage from moisture and moisture. It stays dry in the storage space of your VW Amarok double cab - and sure ! Each of the 3 folding elements is made of high-quality solid composite plastic, which is lighter, harder and more break-resistant than aluminium. Each of the panels of the cover consists of a high-density foam core with an aluminum cover. Each FLEX cover is fitted with a profile system to which seals and drainage hoses are connected, so that rain and dirty water is drained off to the side from both the inside and the outside. The loading area of the Volkswagen Amarok is thus protected from dust and large-scale water ingress. The snap-lock system on each foldable element ensures that the cover is held securely and securely and protects the loading space from unauthorized access. The FLEX load compartment cover for folding can be securely locked via the tailgate. The cover can be closed, opened 2/3 or completely open. In any case, you save up to 15% on fuel with the cover installed. A "quick release system" allows full flexibility for using the loading area of the Amarok after the initial installation. If unexpectedly large objects are to be transported, the entire cover can be dismantled in no time at all - and reassembled. It is also ideally suited for use with a living room. All this makes FLEX one of the most popular and best-selling covers worldwide. You can also rely on NOVISAUTO's secure supply of spare parts
Cargo area cover "G2" (aluminium cover) is a "fixed-to-fold" cargo area cover - you save 10-15% on fuel costs! For VW Amarok double cab from year of construction 2010+ The G2 aluminum cover offers 100% full access to the entire load area of the VW Amarok when required, the visibility of the 3rd brake light is guaranteed. When transporting a large load, simply fold the tonneau cover and fold it against the cab. The load compartment cover made of aluminum and other composite materials can be used very flexibly. The durable, solid aluminum sandwich panels are mounted flush with the bed of your Volkswagen Amarok pickup for an extremely low profile design. Thanks to the unique clamping system, installation is child's play. Backwater on the cover is drained out of the truck bed via drain hoses. The new integrated buckle system allows you to keep the tonneau cover open or folded - flipped - closed while driving. The VW Amarok tonneau cover's patented locking system is concealed beneath the tonneau cover - simply latch the tailgate to secure the contents of your flatbed. Premium UV resistance protects your tonneau cover from fading and calcification. The quick release ensures that the cover is easy to put on and take off. Thanks to the flat, low-profile design of the cover, the "pure" Amarok pickup look is retained. The G2 aluminum cover is the ideal multifunctional solution for unlimited use of your VW Amarok pickup truck at the best price-performance ratio. We guarantee you a secure and uncomplicated supply of spare parts for all covers purchased from us. The ideal VW Amarok accessory part.
Carryboy - Sportlid SX trunk cover lid with gas springs for Volkswagen Amarok Double Cab 2010-2020 can be moved with ease, thanks to gas springs Save up to 15% on fuel with Carryboy The cover is insensitive in robust, also commercial use ideally suited for an exceptionally long service life reliably closes the entire loading space All-round seals keep the cargo area dry it is stable and easy to use Paintwork in body color possible lockable - two keys incl. easy construction The load compartment cover of the lid type with shock absorbers for the VW Amarok. Secure a long-term supply of spare parts with us. This load compartment cover for the Amarok impresses with its elegant design. As an accessory for the VW Amarok, the SX retains the original shape of the pickup. Don't sacrifice the security of a hard cover for the Amarok. This load compartment cover for the Amarok can be securely locked thanks to a rotary lock with a cylinder. The sides of the cover nestle over the edge of the pickup and therefore not only reliably protect against water, but also close the entire loading area. The construction is uncomplicated and can also be done with a loading space tub. The SX is also available in combination with a matching stainless steel roll bar.
Carryboy Roller Lid aluminum roller blind CB-789-VWAD for Volkswagen Amarok Double Cab 2010+ Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with lower edge - load compartment tub detailed assembly description - assembly kit included only suitable without front protection grille or other roll bars The Rollerlid 789 for the VW Amarok double cab is an aluminum roller blind for retrofitting on your Volkswagen Amarok. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not essential. The aluminum roller blind from CARRYBOY for the Volkswagen Amarok is available with aluminum-colored slats or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. The double-walled design of the individual slats makes the roller blind for the Amarok particularly robust and resilient. The ergonomic grip strip for operating the VW Amarok double cab aluminum roller blind has a good grip thanks to the ribbing - even in wet weather! The Rollerlid 789 for the Amarok double cab is installed flat at the level of the loading sill. Rainwater that falls on the load compartment of the Volkswagen Amarok is safely kept away from the load compartment via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Volkswagen Amarok double cab and is therefore a secure and flexible closure. The aluminum roller blind 789 is an attractive and flexible Amarok accessory.
NOVISauto - Pickup cover for the Volkswagen Amarok double cab. Load compartment cover, load compartment roller blind model RETRAX: The roller blind - intelligently designed, masterfully manufactured - quality you can feel ! The construction of the Retrax Rolltops improves the aerodynamics of your pickup so much that you reduce your fuel consumption by up to 10%! Matte or gloss finish - powerful and incredibly scratch resistant your robust and stylish way makes your pickup unique Made from one piece - without hinges to avoid wear and freezing Manufactured from a durable thermoplastic Polycarbonate or also available as an aluminum roller blind - ideal materials for extreme loads in everyday traffic and off-road. easy to handle securely lockable via the tailgate - lockable in any position The load compartment roller blind RETRAX for the Volkswagen Amarok impresses with the flat construction of the cover. The roller blind closes flush with the loading edge, but has enough contact surface on the edge for optimal stability of the cover. The roller blind is set up quickly and easily using clamps. Order the load compartment roller blind in different versions: Either made of a light, but very strong and durable polycarbonate, or in the aluminum roller blind premium version with double-walled slats. The radio control option can also be booked. Would you like to use the loading area of your VW Amarok "double-decker" with the supplied accessories? No problem! Our roller blind also offers crossbar preparation on. Additional Amarok accessories can be mounted on this (e.g. crossbars, roof baskets, bicycle racks and much more).
CARRYBOY - load compartment cover Model GRX-VWAD for Volkswagen Amarok double cab (years of construction 2010-2020) with painted roll bar / protective bar with stainless steel inserts can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in white primer, also available in body color securely lockable - two keys incl. locks the entire loading area Save up to 15% on fuel with CARRYBOY Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The GRX cargo area cover from CARRYBOY for the VW Amarok double cab is a stylish but also functional cover. This VW Amarok accessory combines the appealing element of a painted cargo area cover with a polished stainless steel styling bar as a contrast. The optimal mix for the most elegant design on the market! The GRX flat cover for the Volkswagen Amarok double cab adapts seamlessly to the vehicle thanks to the paint finish in the vehicle color. The edges of the load compartment lid are curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. All-round seals lie on the load compartment of your Amarok vehicle and keep water and dust out of the load compartment. Rain drains unhindered through the cover on the edge of your Volkswagen Amarok double cab pickup. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the load compartment cover GRX for the Volkswagen Amarok is made in one piece together with the roll bar, there are no rattling parts, unnecessary places for water to enter or unsightly seams. The cargo area of your VW Amarok double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not sufficient, the loading space can be equipped with our lower edge lighting system Blight as an additional Amarok accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX cargo area cover for the VW Amarok double cab (2010-2020). We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
VW Zubehör
CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.
Carryboy - full bed pull-out shelf - Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Carryboy - Slide Floor Universal - Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00 100*100cm CB-550x-01 100*120cm CB-550x-02 100*160cm CB-550x-03 100*130cm The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.
CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material: Materials from the outside: Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays) Material from inside: 190 g/sqm rip-stop polyester with PU 2000mm Bottom material: 210 Denier Oxford Nylon with PU 2000mm Interior: rust-free aluminum struts ensure structure and comfortable lying 6 cm foam mattress can be removed and cleaned 6 large windows with insect screens 2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size: Unfolded & erected: 1,340 x 2,165 x 1,343mm folded: 1,340 x 2,165 x 300mm Weight: 56 kg (together with ladder)
Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p
Equip your pickup truck of any brand with an Elevate Rack crossbar from NOVISauto. Expand your storage space with accessories from the storage and transport solutions section. Our accessories adapt seamlessly to your vehicle. The assembly kit and installation instructions are included. If required, we can carry out the professional installation of the accessories ourselves. Our employees are technically skilled, professionally competent and practically experienced. Your NOVISauto accessories at a glance: For all brands of all years NOVISauto accessories manufactured by Realt Truck Truxedo Can be combined with load compartment covers with rail system or T-slot system More space, more joy - Elevate Rack crossbar system is an ideal storage and transport solution The Elevate Rack is a unique solution for your pickup truck. Expand your cargo space with raised crossbars at cab height. This means no cargo space is lost on the bed. On the contrary - new chances and opportunities arise. More cargo space, more room. We offer various accessories to optimise the loading options. Choose between a roof basket, kayak holder, load securing and lashing clamps. Our unique solution can be combined with load area covers. So don’t hesitate and use this unique product!
Rüsten Sie Ihren Pickup Truck verschiedener Marken Baujahr(e) bis 2026 mit einer hochwertigen CARGO von NOVISauto aus. Mehr Komfort. Bessere Bedienung. Ihr Pickup – noch benutzerfreundlicher. Mit Zubehör aus der Rubrik Komfort & Benutzerfreundlichkeit. CARGO erhöht die Benutzerfreundlichkeit Ihres Fahrzeugs und integriert sich reibungslos an Ihre Bedürfnisse. Mit dem beiliegenden Montagekit und einer verständlichen Anleitung gelingt der Einbau im Handumdrehen. Zusätzlich helfen Ihnen unsere Schritt-für-Schritt-Videos auf YouTube. Bei Fragen oder individuellem Beratungsbedarf erreichen Sie unser erfahrenes Team jederzeit – wir helfen Ihnen gerne weiter. Auf Wunsch übernehmen unsere technisch versierten und erfahrenen Fachkräfte die fachgerechte Montage Ihres Zubehörs. Profitieren Sie von unserem empfehlenswerten Zubehör Modell CARGO für Ihren Pickup Produkte für alle Ladeflächenlängen bis Baujahr 2026. Unsere NOVISauto Zubehör - Ihre Vorteile zusammengefasst: Kompatibilität: Chevrolet Silverado, DFM Rich 6, Fiat Fullback, Ford F150, Ford Ranger, Foton 3 / G7, Foton 4 / V9, GMC Sierra, Isuzu D-Max, Iveco Daily, JAC 8, JAC 9 EV, Jeep Gladiator, Jeep Wrangler, Maxus T60 / T90, Mercedes Sprinter, Mercedes X-Klasse, Mitsubishi L200, Nissan Frontier USA, Nissan Navara, Nissan Titan, Nissan oder Renault, RAM1500 DS (09-18) / 2019+ Modell RAM CLASSIC, RAM1500 DT (2019+), Renault Alaskan, SsangYong Acyton/Musso, Tata Xenon, Toyota Hilux, Toyota Tundra, VW Amarok, Volkswagen Crafter Produkte für alle Ladeflächenlängen Baujahr bis 2026 Qualitätsprodukt: TRUXEDO BY REALTRUCK Zubehör Anwendungsfall: Zubehör geeignet für Komfort & Benutzerfreundlichkeit Montageart: Klemmen Material: Stahl ungefähre Montagezeit: 5 min wiegt circa ca. 2 kg Kilogramm besonderes Merkmal: Leichtgewicht, extrem kurze Einbauzeit, hohe Kompatibilität, mitnehmbar, robust und wetterfest besonderes geeignet für: bequeme Nutzung, einfache Anwendung, häufige Anwendung und täglicher Gebrauch Befestigungsort: Pritschenkante** Bester Service - vor dem Kauf, als auch nach dem Kauf Für uns stehen Ihre Bedürfnisse an erster Stelle. Es spielt keine Rolle, ob Sie vor oder nach dem Kauf stehen: Unser umfassender Service hilft Ihnen bei jeglichen Fragen. Bestehen Fragen oder Unsicherheiten Ihrerseits? Wir sind per Telefon oder E-Mail schnell erreichbar. Unser erfahrenes Team berät Sie kompetent, freundlich und individuell auf Ihre Bedürfnisse abgestimmt. Mehr als 16 Erfahrungsjahre in in unserer Branche machen uns zu angesehenen Partnern. Unsere technisch versierten und fachkundigen Mitarbeiter verfügen über fundiertes Wissen und umfangreiche Praxiserfahrung, um Ihnen jederzeit weiterzuhelfen. Praktisch. Durchdacht. Langlebig. Langfristige Nutzung und somit Nachhaltigkeit ist Ihnen wichtig? Eine lange Lebens- und Nutzungsdauer unseres Zubehörs wird durch die Verwendung von hochwertigen Teilen, Rohstoffen und Materialien ermöglicht. Genau diese lebenslange Nutzung ermöglicht ein Sparen von wertvollen Ressourcen - Nachhaltigkeit durch Nutzungsdauer! Hochwertige CARGO von NOVISauto für erweiterten Komfort und Benutzerfreundlichkeit Das Eigengewicht des NOVISauto Zubehörs beträgt circa circa ca. 2 kg. Die leichte Konstruktion ermöglicht eine einfache Bedienung und ist kein Zusatzgewicht für Ihren Truck! Die Schale unseres CARGO Zubehörs für Ihren Pickup Truck Produkte für alle Ladeflächenlängen Baujahr bis 2026 besteht aus dem Material Stahl. Die Vorteile von Stahl sind nicht von der Hand zu weisen. Stahl ist robust, widerstandsfähig und stabil. Damit ist Ihr Zubehör für Belastungen bestens gewappnet. Auf der Pritschenkante wird das Gepäckhilfe zum Herausholen von Gegenständen aus der Ladefläche montiert. Ungefähr 5 min werden für die Montage der Abdeckung auf Ihren Pickup Truck benötigt. Eine Montage mit Klemmen ermöglicht eine bessere Standfestigkeit des Zubehörs. Durch Klemmen sitzt das Zubehör besonders sicher an. Leichtgewicht, extrem kurze Einbauzeit, hohe Kompatibilität, mitnehmbar, robust und wetterfest: Das sind die besonderen Merkmale des Zubehörs. Zusammenfassend ist das Zubehör CARGO von NOVISauto für Ihren Pickup Truck Produkte für alle Ladeflächenlängen bis 2026 besonders für Bequeme Nutzung, einfache Anwendung, häufige Anwendung und täglicher Gebrauch geeignet.
NOVISauto - lockable cassettes with stereo compartment (model Stereo DELUXE) for car center consoles The lockable Autosafe cassette for installation in the center console of your pickup or SUV offers security for your valuables. In addition to the lockable security compartment "SERIES 2", the "Deluxe" car safe cassette for the center console offers an additional compartment for installing a CD player. Security : The cassettes offer a safe and secure place for valuables that you want to have close at hand while driving. The stable cassette is made of 1.5 mm thick steel with a tight-fitting lid. Locking is via the US-patented, burglar-proof locking system Pry-Guard with double-bit key with 10 tumblers. The unique design includes an exclusive hinge system. Grade 8 mounting hardware is included. The Stereo Deluxe consoles are equipped with patented push-button locking system and Pry-Guard II locking system, which ensure lasting security. Furnishing: The outside of the cassette has a durable black powder coating with a textured finish. Choose the color to match the interior of your vehicle: Black beige brown The bottom of the cassette is covered with a rubber mat, the cup holder can accommodate different formats thanks to the size of the openings, flexible rubber mounts are used to minimize vibrations while driving. Comfort: The padded and vinyl covered armrests are for your personal comfort. That Patented push button locking system allows the lid to be closed without locking. Useful details such as a practical storage compartment and a removable small parts tray under the lid complete the offer. Assembly: Supplied with high quality mounting kit and more detailed installation instructions. Note: Standard hardware will require holes to be drilled and secured with the fasteners provided. Depending on your vehicle's center console design, additional hardware may be required.
Der vielseitige Offroad - Ladeflächenaufbau für Ihren europäischen Pickup!Unser Offroad - Profi - Rack für alle gängigen europäischen Pickups (Ford Ranger, Toyota Hilux, VW Amarok, Isuzu D-Max, Mitsubishi L200, Maxus T60 / T90, Nissan Navara) ist eine vielseitige Platform für alle Anwendungen von Gewerbe bis Freizeit. Verwandeln Sie Ihre Ladefläche Ihres Pickups zu einer Multifunktionsplattform mit unendlichen Anwendungsmöglichkeiten.Der Ladeflächenträger XRS für den Ford Ranger und Toyota Hilux benutzt die bewährte 4-CORE Technologie. Diese erlaubt es, Schrauben oder Nutensteine auf jeder Seite der Trägerschiene zu befestigen - so kann fast jedes Zubehörteil am Ladeflächenträger XRS Rack befestigt werden.Der robuste Ladeflächenaufbau Modell XRS für Pickups wie den Ford Ranger und Toyota Hilux besticht durch folgende Eigenschaften: Kombination der Materialien Stahl und Aluminium - besonders stabil bei vergleichsweise geringem GewichtTrägerkonstruktion aus Stahl / Befestigungselemente und Querträger aus Aluminiumträgern mit 4-CORE Technologie Belastbar bis 270kg statisch - 135kg Offroad - somit ideal geeignet für Dachzelte und Camping Ausstattung einfache Montage ohne Bohren - Klemmbefestigung mattschwarze Oberflächenbeschichtung Reichlich Quertäger zur Befestigung von ZubehörGroße Anzahl von Befestigungslöchern für Zubehör und Licher an der TrägerkonstruktionMultifunktionale Befestigungsplatte im Set enthalten (1x) - zur Befestigung von Ausrüstung, Werkzeug, Zubehör, Wassertanks uvm. - kann in jeder Position entlang der Querträger angeschraubt werden.Ausstattungen des XRS Ford Ranger / Toyota Hilux / Isuzu D-Max Rack wird Ihnen im Zubehörbereich weiter unten angezeigt:Zusätzliche XRS Befestigungsplatten (montierbar an allen 3 Außenseiten sowie Innenseiten)Abklappbare und verriegelbare XRS Arbeitsplattform (inklusive extra Befestigungsplatte an der Außenseite - verdoppelt die Staumöglichkeiten und schützt innenliegendes Transportgut)XRS Haltegriffe / Klampen zum Einstieg oder Befestigung von SpanngurtenXRS Bodenplatten für Dach (erlaubt auch Befestigung von kleinen Gegenständen, die sonst durch die Querträger fallen würden)XRS Halter für Camping - KlapptischeXRS Kit zur Erweiterung der Dachfläche (Überhang - Kit für die Kabine zur Befestigung von weiteren Plattformen oder langen Dachzelten)XRS Verzurrösen im Set von 4 StückXRS MarkiesenhalterungenXRS Schnellbefestigungen für DachzelteXRS zu SRM Dachplatform - Konnektoren Statten Sie Ihren Pickup mit einem hochwertigen Ladeflächenträger von NOVISauto aus. Das XRS Rack bietet die ideale Grundlage für eine vielseitige und individualisierte Nutzung. Alle Teile des Ladeflächensystems sind auf eine intensive Offroad Nutzung ausgelegt und damit für jegliche Nutzungsmöglichkeit - inklusive Gewerbeanwendung - geeignet. Der XRS Rack wird inklusive einer Befestigungsplatte, Montagekit und Anleitung geliefert. Benötigen Sie für Ihre Ausflüge eine hochwertige Plattform für Ihre Camping Ausstattung? Kein Problem!Bauen Sie Ihr Dachzelt mit den Schellbefestigungen in einigen Minuten ohne Werkzeuge auf die Ladefläche auf. Für besonders große Dachzelte sowie viel Transportgut kann das XRS Rack mit einem zusätzlichen Adapter nochmals um 140cm über die Kabine oder nach hinten verlängert werden. Die Tischgarnitur für den Naturausflug kann mit Hilfe zusätzlicher Halter direkt auf der Unterseite des Racks befestigt werden und nimmt keinen wertvollen Platz weg. Auch die Markise kann bequem an der Seite des Ladeflächenträgers befestigt werden. Die Halterung hierfür ist so geformt, dass die Markiese nicht im Weg ist.Der zusätzlich erhältliche Klapptisch bietet zweierlei Vorteile. Zunächst ist dieser so gestaltet, dass ausreichend Platz zur Befestigung von schmalen Kanistern oder Werkzeug zwischen Tisch und Rack vorhanden ist. Der Klapptisch kann verschlossen werden, um das Transportgut dahinter vor Diebstahl zu schützen. Auf der Außenseite des Klapptisches ist eine Befestigungsplatte vorhanden, um weiteres Gut daran zu befestigen. Die nutzbare Fläche ist somit verdoppelt! Gleichzeitig bietet der Tisch durch seine Aluminiumoberfläche eine Arbeits-, und Stauplattform im ausgeklapptem Zustand. Unser Angebot runden wir ab mit unserem Ersatzteilservice und einer hervorragenden Beratung.
Alternative: Ford Hardtops
One of our BEST for the Ford Ranger Double Cab! our Carryboy professional hardtop model WM-Workman, finished in universal white - but also available in any other color. Carryboy's robust first-class professional hardtop for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the vehicle fleet! Bow sliding window optionally available (additional costs) for maximum convenience in loading and unloading available in universal white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK flaps Tinted all-glass rear door lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Carryboy hardtop model 840 with side sliding windows for Ford Ranger 2002-2011 double cab - in all body colors Fixed window in front side sliding windows lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Chrome roof rails for decoration (no load possible) Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Carryboy hardtop model 840 with side sliding windows for Ford Ranger double cab - in all body colors Fixed window in front side sliding windows lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Carryboy hardtop model 840 with side sliding windows for Ford Ranger double cab - in all body colors Fixed window in front side sliding windows lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Carryboy hardtop model 840 without side windows for Ford Ranger double cab 2002-2011 - in all body colors Fixed window in front Laterally without window made of GfK hard plastic lockable rear door (chrome lock) the rear door can also be opened from the inside for safety Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable when you close the hardtop rear door, you also close the platform hatch Chrome roof rails for decorative purposes - not resilient 3rd brake light integrated in hard top hatch Hinges in stainless steel Mounting kit and description are included in the delivery
Carryboy hardtop model 840 without side window for Ford Ranger double cab - in all body colors Fixed window in front Side without window lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Chrome roof rails for decorative purposes (not resilient) 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Carryboy hardtop model SO with tinted folding windows on the side Ford Ranger double cab - in all body colors side tinted folding windows Tinted all-glass rear door bow window Bow sliding window optionally available (additional costs) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Carryboy hardtop model SO56 a side tinted folding window and a sliding window for Ford Ranger double cab 2012+ - available in all body colors side tinted folding window on driver's side side tinted sliding window on passenger side bow window Tinted all-glass rear door the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 60 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
CARRYBOY hardtop model SLRR with side tinted folding window for Isuzu D-Max double cab 2021+ - available in all body colors side tinted folding windows in SUV style and central locking (continuous with no visible fasteners) All-glass tinted rear door with heating and central locking (SUV style) bow window Bow sliding window optionally available (additional costs) the rear door can also be opened from the inside for safety Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black roof rails have been tested with a load capacity of 80 kg GRP spoiler with paint finish and 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
CARRYBOY hardtop model S6 with side tinted vent windows for Ford Ranger year of construction from 2012 double cab - available in all body colors Side tinted vent windows Tinted all-glass rear door the tailgate can also be opened from the inside Roof lining made of robust, close-meshed black-grey woven fabric No vinyl!!! and therefore no risk of mold stains, easy to clean and repair Interior lamp 3-fold manually adjustable from the inside Automatic on/off switch when opening/closing the tailgate. When you close the hardtop rear door, you also lock the platform hatch Aluminum roof rails, removable - tested to 80 kg for additional loading capacity Stainless steel hinges Mounting kit and description included
Alternative: VW Hardtops
Carryboy hardtop model SO with tinted folding windows on the side Accessory for Volkswagen Amarok crew cab - available in all vehicle colors side tinted hinged windows with lock Tinted all-glass rear door with heated rear window Front sliding window All side flaps and the tailgate are frameless! Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black aluminum roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light in LED technology Hinges in stainless steel Mounting kit and description are included in the delivery The CARRYBOY hardtop SO-VWAD for the VW Amarok is characterized by its unique design. The tinted glass side flaps of the hard top form a unit with the shell of the hard top. The incomparable design is not insignificantly influenced by the frameless side flaps and the frameless tailgate. No more annoying frames that would disturb the design line of the hardtop and the VW Amarok pickup! The CARRYBOY hardtop SO is the ideal VW Amarok accessory for anyone who wants to access the load compartment from all sides, but at the same time would like to benefit from maximum storage volume. In addition to the hardtop, we also recommend other VW Amarok accessories from CARRYBOY for commercial businesses: MAX-SEAL tailgate seal swing-out storage boxes SWINGCASE for driver and passenger side Load compartment tub in carpet design or as a hard-shell tub pull-out loading floor with integrated drawer system CB-800. For even better illumination of the Amarok loading space, we offer our proven BLight lighting system with 6 practical LED lights that can be attached under the edge of the loading area. The wiring can be connected to the permanent power supply of the hard top.
Carryboy hardtop model SO56 a side tinted folding window and a sliding window for Volkswagen Amarok double cab 2010-2020 - available in all body colors tinted folding window on the driver's side tinted sliding window on the passenger side sliding front window Tinted all-glass rear door without rear window heating Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable when you close the hardtop rear door, you also close the platform hatch the black, removable roof rails have been tested with a load capacity of 80 kg Hardtop facelift with improved contours and 3rd brake light integrated in the roof Hardened stainless steel hinges Mounting kit and description are included in the delivery
Carryboy hardtop model SO(N)R with tinted folding windows on the side for Volkswagen Amarok crew cab - available in all body colors side tinted hinged window with lock and connection ZV Tinted all-glass rear door with rear window heating and ZV connection Front sliding window All side flaps and the tailgate are frameless! Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black aluminum roof rails have been tested with a load capacity of 80 kg 3. Brakes with indicated GRP spoiler Hinges in stainless steel Mounting kit and description are included in the delivery The CARRYBOY hardtop SONR-VWAD for the VW Amarok is characterized by its unique design. The tinted glass side flaps of the hard top form a unit with the shell of the hard top. The incomparable design is not insignificantly influenced by the frameless side flaps and the frameless tailgate. No more annoying frames that would disturb the design line of the hardtop and the VW Amarok pickup! The CARRYBOY hardtop SO is the ideal VW Amarok accessory for anyone who wants to access the load compartment from all sides, but at the same time would like to benefit from maximum storage volume. In addition to the hardtop, we also recommend other VW Amarok accessories from CARRYBOY for commercial businesses: MAX-SEAL tailgate seal swing-out storage boxes SWINGCASE for driver and passenger side Load compartment tub in carpet design or as a hard-shell tub pull-out loading floor with integrated drawer system CB-800. For even better illumination of the Amarok loading space, we offer our proven BLight lighting system with 6 practical LED lights that can be attached under the edge of the loading area. The wiring can be connected to the permanent power supply of the hard top.
Carryboy hardtop model S6 with tinted vent windows on the side for VW Amarok double cab 2010-2020 - available in all body colors Lateral, tinted hinged windows in one piece up to the driver's cabin Tinted all-glass rear door with heated rear window sliding front window the rear door can also be opened from the inside for safety 3rd brake light integrated in the rear window Roof lining made of robust, close-meshed black-grey woven fabric No vinyl!!! and therefore no risk of mold stains, easy to clean and repair Interior lamp 3-fold manually adjustable from the inside When you close the hardtop rear door, you also lock the platform hatch Airline roof rail - tested to 80kg for extra loading capacity Stainless steel hinges Mounting kit and description included Spare parts guaranteed even after years
One of our BEST for the Volkswagen Amarok Double Cab 2010-2020 ! our Carryboy professional hardtop model WM - VWAD - Workman, finished in universal white - but also available in any other color. The robust first-class professional hardtop from Carryboy for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the Volkswagen Amarok and the entire pickup vehicle fleet! Front window untinted for maximum ease of loading and unloading thanks to wing flaps the hardtop with the highest through-loading height in our range! Both from behind and from the sides. available in white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK wing flaps Tinted all-glass rear window for visibility securely lockable rear door and side flaps with rotary lock and cylinder (optional ZV connection) Hardtop closes the entire cargo area and the tailgate at the same time Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair bright LED interior lamp indicated spoiler with 3rd brake light in LED technology robust hinges in stainless steel on the tailgate and side flaps Mounting kit and description are included in the delivery Equip your Volkswagen Amarok double cab (2010 - 2020) with a high-quality hardtop from CARRYBOY. The WM offers the ideal basis for commercial use. Maximum through-loading height from the sides and rear, as well as the particularly robust design maximize the available hard top interior volume. All components of the hardtop for the VW Amarok were designed and tested for the stressful and frequent use in daily business. The roof rails on this model have been removed in favor of the hardtop height. However, it is possible to install a complete roof rack system on the hard top as an additional accessory. If desired, this can also extend beyond the driver's cab of the VW Amarok. It is available in the sizes 1200x1900mm and 1200x2400mm. Check with us for availability and price. An even more convenient operation of the VW Amarok WM hardtop is possible by connecting it to the vehicle's central locking system. All three flaps are locked or unlocked at the touch of a button on the vehicle key. We round off our offer with our spare parts service. For CARRYBOY hardtops, we will continue to offer the right spare parts for years and decades, even beyond the service range of the vehicle manufacturers.
Carryboy hardtop model 560 with tinted sliding windows on the side for Volkswagen Amarok Double Cab 2010-2020 - in all body colors. tinted sliding side windows sliding front window Tinted all-glass rear door with heated rear window Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black aluminum roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery The CARRYBOY Hardtop 560-VWAD for the VW Amarok is characterized by its unique design. The tinted glass sliding hardtop windows form a unit with the hardtop shell. The frame of the sliding window adapts perfectly to the contour of the hard top. No more protruding window frames that would disturb the design line of the hardtop and the VW Amarok pickup! The CARRYBOY Hardtop 560 is the ideal VW Amarok accessory for all dog owners. Your animal will thank you. The large sliding windows on all sides ensure sufficient air supply in the hard top. In order to be able to open the windows completely, we offer specially developed dog guards for installation on the windows. The Hardtop 560 also offers ideal properties for everyday use for all other users. Convenient use, durability, plenty of light in the cargo area and fuel savings of up to 10%! In addition, we ensure the supply of spare parts for all our hardtops for many years. Even in the event of damage, the GRP material used is characterized by its high user and repair friendliness. An even more convenient operation of the VW Amarok hardtop is possible with an optional connection to the vehicle's ZV!
Carryboy hardtop model 560 without side window for Volkswagen Amarok double cab 2010-2020 - available in all body colors. Standard version: without side windows, closed sides in one piece bow sliding window 2-component primer tinted all-glass rear door with heated rear window Headliner made of robust, close-meshed black-grey woven fabric, no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3 times manually adjustable from the inside, automatic on/off switch when Opening/closing the tailgate when you lock the hardtop rear door, you also lock the platform hatch the black, removable roof rails have been tested up to 80 kg Spoiler with 3rd brake light Hinges in stainless steel Construction without drilling. Installation with load compartment tray possible Mounting kit and description are included in the delivery The CARRYBOY hardtop without side windows for the Volkswagen Amarok is ideal for commercial use. Robust GRP material, high-quality paintwork and privacy protection from both sides also allow valuable goods to be transported on the loading area of your Amarok. The hardtop 560oS for the VW Amarok has a glass rear window with rear window heating for an unobstructed view to the rear, this can also be replaced with a painted tailgate if desired. With CARRYBOY hardtops you also secure our spare parts service. Benefit from a secure supply of spare parts beyond the manufacturer's service range.