Carryboy hardtop with folding window, sliding window and central locking SO56(R)-VWAD

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

NOVISauto lashing clamps "CARGO CLEATS" - an ingeniously simple lashing system for your pickup loading box  -  installed in minutes ! the optimal alternative for backup  of your transported goods!  No drilling is required to attach the cleats anywhere on the top edge of the cargo box side walls. No damage to paint or sheet metal during installation and under load. The cleats are made of plastic-coated glass, so they are extremely durable and will not rust. Loads of up to around 200 kg are possible and can also be used for most of our luggage compartment covers. Additional CARGO CLEADS are required for larger loads:  always use more CARGO CLEATS to secure your cargo than necessary! - - Sold in pairs, information on attachment and application options, such as tips for knotting, for optimal loading is included. To note:  CARGO CLEATS cannot be used with load compartment tubs that are over the edge (overrail tubs) -  unless the tub is cut out at the relevant attachment points. CARGO CLEATS is not suitable for plastic-coated cargo boxes.    

NOVISauto - pre-compressed, permanently elastic joint sealing tape  for sealing the joint between the hard top or load compartment cover and the vehicle load box. Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover  glued on, previously trimmed a little at the ends.  Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps. A detailed assembly description is enclosed with the delivery.

NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene  

NOVISauto – B-Light / B-Light  is the ultra-bright lighting for your pick-up loading area made of 8 brightly lit LED units, each with 6 LED bulbs. B-Light fits all pickup trucks and models - B-Light brightly illuminates the entire cargo area of your pickup - There is only one switch for the whole light system. B light is suitable for all pickups with any cargo area covers or hardtop.  To protect against slipping loads, B-Light should be mounted under the U-rail on the side.

Saddlebag -  Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away  in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.   

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

NOVISauto - bed mat model BedMat in universal size for all common and non-common pickup models (also for special editions, extended vehicles) The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area. The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush. The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping. The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas. It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery. Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ). universally applicable for all models Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.  

NOVISauto - SwingCase tool box for VW Amarok 2010-2020 Ultra-practical box for tools, sporting goods and many small parts You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing"  is more needed! NOVISauto, the market leader in selling popular Volkswagen Amarok accessories, builds these versatile storage boxes from impact-resistant ABS hard plastic for your convenience - strong enough for a long Amarok truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Volkswagen Amarok. - The purchase of two SwingCases for both sides of your VW Amarok platform wall is the best choice - space-saving, absolutely tight and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts!  SwingCase can be parked lying down or standing as usual. To save space, fix the SwingCase tool box to the side of the Volkswagen Amarok between the platform door and the wheel housing. SwingCase for your VW Amarok truck on the passenger side can be swung out , and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. This means that removing the VW Amarok is no longer possible. The tool box (tool box) and storage box is an essential VW Amarok accessory for every tradesman or hobby - do-it-yourselfers. The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Volkswagen Amarok pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

NOVISauto - load compartment liner, non-slip model BedRug BFRRD12 for Ford Ranger Double Cab 2012+ dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use continuous fabric-like PP plastic between loading area and tailgate, this effectively protects the hinges of the platform flap Anti-slip surface for safe transport  The innovative and unique BEDRUG load compartment liner made of 100% polypropylene not only protects against impact and damage, but also withstands stress from gravel to battery acid.  

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

NOVISauto sport bar roll bar 2.0 Black Edition for your EU pickup (Ford Ranger 2012+, Nissan Navara 2016+, Renault Alaskan, Mercedes X-Class, Isuzu D-Max 2012+/2020+, Toyota Hilux) Give your pickup style and a massive appearance with the roll bar sport bar 2.0 in matt black design. The roll bar sport bar 2.0 does not block your 3.  Brake light - It remains visible for everyone. This universal version was developed for the entire range of common pickups in Germany. Make your pickup unique with this roll bar. The following vehicles can be equipped with the roll bar: Ford Ranger 2012+ Nissan Navara NP300 2016+ Isuzu Dmax 2012- 2020 / 2020+ Renault Alaskan 2017+ Mercedes X Class 2018-2020 Toyota Hilux 2016+ /2021+ The roll bar 2.0  is compatible with most retractable or roll-up tonneau covers  and various covers for folding.  The fixed standard version of the roll bar can be equipped with lighting panels including a variety of individual lights and LED strips up to a length of  101 cm (40 inches) can be equipped. Alternatively, an electrically operated holder allows the lights to be lowered using a switch when not in use. The sports hanger 2.0 is made of steel, dimensionally stable, unbreakable and resilient. You get the best quality in terms of workmanship and design. The matt black powder coating of the roll bar protects the material and ensures a coordinated look. The delivery includes assembly kit and installation instructions, the assembly time is about 2 hours. Note: Drilling holes on your pickup are required for assembly if you want to combine certain load compartment covers. We recommend the use of rivet nuts in this case. On vehicles without tonneau covers, the bracket can be installed using convenient mounting clips.

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material:   Materials from the outside:   Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays)   Material from inside:   190 g/sqm rip-stop polyester with PU 2000mm   Bottom material:          210 Denier Oxford Nylon with PU 2000mm Interior:   rust-free aluminum struts ensure structure and comfortable lying   6 cm foam mattress can be removed and cleaned    6 large windows with insect screens   2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size:   Unfolded & erected:           1,340 x 2,165 x 1,343mm   folded:             1,340 x 2,165 x 300mm   Weight:                               56 kg (together with ladder)    

Novisauto Pathfinder-1 roof tent The Novisauto roof tent for every pickup or at least mid-range SUV is one of the first innovative electrically controllable roof tents. You can straighten it up and down with a simple push of a button, alternatively you can also do it by hand. The tent is set up on the vehicle using clamps on cross members. Comfort : Self-erecting by remote control within 60 seconds Power supply via socket of the vehicle (3m cable) spacious interior with enough space for 2 people Reliable protection against wind and rain with extendable telescopic aluminum ladder - loadable up to 150kg with 6cm foam mattress. The cotton cover can be removed and washed. 2 extra hanging pockets for storing shoes, for example double fly screens in front of the windows and the entrance Tent size :   unfolded & erected (inside):      1,200(W) x 2,000(L) x 1,100(H) mm   Weight:                                       56 kg (together with ladder)   Material :   Material outside:   Oxford polyester with silver coating and UPF50+ *   Materials inside:   190 g/sqm ripstop polyester with 2000 mm water column   Bottom material:   210 Denier Oxford Nylon with 2000mm hydrostatic head Interior :   Stainless steel struts provide structure.   6 cm foam mattress can be removed with cover   6 windows with insect screen and privacy screen   2 additional shoe bags  

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Der vielseitige Offroad - Ladeflächenaufbau für Ihren europäischen Pickup!Unser Offroad - Profi - Rack für alle gängigen europäischen Pickups (Ford Ranger, Toyota Hilux, VW Amarok, Isuzu D-Max, Mitsubishi L200, Maxus T90, Nissan Navara) ist eine vielseitige Platform für alle Anwendungen von Gewerbe bis Freizeit. Verwandeln Sie Ihre Ladefläche Ihres Pickups zu einer Multifunktionsplattform mit unendlichen Anwendungsmöglichkeiten.Der Ladeflächenträger XRS für den Ford Ranger und Toyota Hilux benutzt die bewährte 4-CORE Technologie. Diese erlaubt es, Schrauben oder Nutensteine auf jeder Seite der Trägerschiene zu befestigen - so kann fast jedes Zubehörteil am Ladeflächenträger XRS Rack befestigt werden.Der robuste Ladeflächenaufbau Modell XRS für Pickups wie den Ford Ranger und Toyota Hilux besticht durch folgende Eigenschaften: Kombination der Materialien Stahl und Aluminium - besonders stabil bei vergleichsweise geringem GewichtTrägerkonstruktion aus Stahl / Befestigungselemente und Querträger aus Aluminiumträgern mit 4-CORE Technologie Belastbar bis 270kg statisch - 135kg Offroad - somit ideal geeignet für Dachzelte und Camping Ausstattung einfache Montage ohne Bohren - Klemmbefestigung mattschwarze Oberflächenbeschichtung Reichlich Quertäger zur Befestigung von ZubehörGroße Anzahl von Befestigungslöchern für Zubehör und Licher an der TrägerkonstruktionMultifunktionale Befestigungsplatte im Set enthalten (1x) - zur Befestigung von Ausrüstung, Werkzeug, Zubehör, Wassertanks uvm. - kann in jeder Position entlang der Querträger angeschraubt werden.Ausstattungen des XRS Ford Ranger / Toyota Hilux / Isuzu D-Max Rack wird Ihnen im Zubehörbereich weiter unten angezeigt:Zusätzliche XRS Befestigungsplatten (montierbar an allen 3 Außenseiten sowie Innenseiten)Abklappbare und verriegelbare XRS Arbeitsplattform (inklusive extra Befestigungsplatte an der Außenseite - verdoppelt die Staumöglichkeiten und schützt innenliegendes Transportgut)XRS Haltegriffe / Klampen zum Einstieg oder Befestigung von SpanngurtenXRS Bodenplatten für Dach (erlaubt auch Befestigung von kleinen Gegenständen, die sonst durch die Querträger fallen würden)XRS Halter für Camping - KlapptischeXRS Kit zur Erweiterung der Dachfläche (Überhang - Kit für die Kabine zur Befestigung von weiteren Plattformen oder langen Dachzelten)XRS Verzurrösen im Set von 4 StückXRS MarkiesenhalterungenXRS Schnellbefestigungen für DachzelteXRS zu SRM Dachplatform - Konnektoren Statten Sie Ihren Pickup mit einem hochwertigen Ladeflächenträger von NOVISauto aus. Das XRS Rack bietet die ideale Grundlage für eine vielseitige und individualisierte Nutzung. Alle Teile des Ladeflächensystems sind auf eine intensive Offroad Nutzung ausgelegt und damit für jegliche Nutzungsmöglichkeit - inklusive Gewerbeanwendung - geeignet. Der XRS Rack wird inklusive einer Befestigungsplatte, Montagekit und Anleitung geliefert. Benötigen Sie für Ihre Ausflüge eine hochwertige Plattform für Ihre Camping Ausstattung? Kein Problem!Bauen Sie Ihr Dachzelt mit den Schellbefestigungen in einigen Minuten ohne Werkzeuge auf die Ladefläche auf. Für besonders große Dachzelte sowie viel Transportgut kann das XRS Rack mit einem zusätzlichen Adapter nochmals um 140cm über die Kabine oder nach hinten verlängert werden. Die Tischgarnitur für den Naturausflug kann mit Hilfe zusätzlicher Halter direkt auf der Unterseite des Racks befestigt werden und nimmt keinen wertvollen Platz weg. Auch die Markise kann bequem an der Seite des Ladeflächenträgers befestigt werden. Die Halterung hierfür ist so geformt, dass die Markiese nicht im Weg ist.Der zusätzlich erhältliche Klapptisch bietet zweierlei Vorteile. Zunächst ist dieser so gestaltet, dass ausreichend Platz zur Befestigung von schmalen Kanistern oder Werkzeug zwischen Tisch und Rack vorhanden ist. Der Klapptisch kann verschlossen werden, um das Transportgut dahinter vor Diebstahl zu schützen. Auf der Außenseite des Klapptisches ist eine Befestigungsplatte vorhanden, um weiteres Gut daran zu befestigen. Die nutzbare Fläche ist somit verdoppelt! Gleichzeitig bietet der Tisch durch seine Aluminiumoberfläche eine Arbeits-, und Stauplattform im ausgeklapptem Zustand. Unser Angebot runden wir ab mit unserem Ersatzteilservice und einer hervorragenden Beratung.  

Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame  for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p

The basic version of the Huckepack camping pickup structure combines everything you need to experience a short adventure. Drive to the North Sea for the weekend and listen to the sound of the waves. How about a 4 to 5 day short trip to the Black Forest and enjoy the peace and quiet while the forest and nature embrace you?  Our motto "Freedom on wheels" is our motto. Enjoy the opportunity to go anywhere. Even the basic version is generously equipped and covers all your basic needs so that nothing stands in the way of your trip. The structure can be packed and unpacked quickly and easily - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!

Carryboy Roller Lid aluminum roller blind CB-789-VWAD for Volkswagen Amarok Double Cab 2010+ Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with lower edge - load compartment tub detailed assembly description - assembly kit included only suitable without front protection grille or other roll bars   The Rollerlid 789 for the VW Amarok double cab is an aluminum roller blind for retrofitting on your Volkswagen Amarok. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not essential. The aluminum roller blind from CARRYBOY for the Volkswagen Amarok is available with aluminum-colored slats or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. The double-walled design of the individual slats makes the roller blind for the Amarok particularly robust and resilient. The ergonomic grip strip for operating the VW Amarok double cab aluminum roller blind has a good grip thanks to the ribbing - even in wet weather! The Rollerlid 789 for the Amarok double cab is installed flat at the level of the loading sill. Rainwater that falls on the load compartment of the Volkswagen Amarok is safely kept away from the load compartment via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Volkswagen Amarok double cab and is therefore a secure and flexible closure. The aluminum roller blind 789 is an attractive and flexible Amarok accessory.  

Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener for Volkswagen Amarok Double Cab 2010-2020 Cargo area tarpaulin - plastic-laminated, waterproof and robust Elegant knobbed finish on the surface Anodized aluminum frame with integrated tarpaulin Fixation of the rolled up tarpaulin on three belt buckles All-round seals against water ingress into the cargo area Tarpaulin can be opened from the outside weatherproof and moisture resistant Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use Can be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The CARRYBOY cargo area cover of the vinyl tarpaulin type for the VW Amarok double cab from year of construction 2010-2020 combines ease of use with an unbeatable price-performance ratio. The load compartment tarpaulin for the Amarok double cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Volkswagen Amarok double cab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality quick-release fasteners reliably secure the tarpaulin for the loading area of the Amarok double cab, so that it is also possible to drive with the tarpaulin open. The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the VW Amarok pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your VW Amarok double cab loading area. All-round seals reliably keep the elements away from the cargo area. The load compartment cover 743 of the type "tarpaulin for rolling up with Velcro" has been specially developed for installation with an over-edge load compartment tub. For VW Amarok vehicles without a load compartment liner with edge protection, we recommend a consultation in advance. Installation without drilling is only possible with a trough of the type mentioned. Installation on the Amarok without a tub is also possible. For professional installation in a specialist workshop or on your own, we recommend using blind rivet nuts. Detailed assembly instructions are included.

Carryboy - Sportlid SX trunk cover lid with gas springs for Volkswagen Amarok Double Cab 2010-2020 can be moved with ease, thanks to gas springs Save up to 15% on fuel with Carryboy The cover is insensitive in robust, also commercial use ideally suited for an exceptionally long service life reliably closes the entire loading space All-round seals keep the cargo area dry it is stable and easy to use Paintwork in body color possible lockable - two keys incl. easy construction The load compartment cover of the lid type with shock absorbers for the VW Amarok. Secure a long-term supply of spare parts with us. This load compartment cover for the Amarok impresses with its elegant design. As an accessory for the VW Amarok, the SX retains the original shape of the pickup. Don't sacrifice the security of a hard cover for the Amarok. This load compartment cover for the Amarok can be securely locked thanks to a rotary lock with a cylinder. The sides of the cover nestle over the edge of the pickup and therefore not only reliably protect against water, but also close the entire loading area. The construction is uncomplicated and can also be done with a loading space tub. The SX is also available in combination with a matching stainless steel roll bar.

CARRYBOY - load compartment cover  Model GRX-VWAD for Volkswagen Amarok double cab (years of construction 2010-2020) with painted roll bar / protective bar with stainless steel inserts can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in white primer, also available in body color securely lockable - two keys incl. locks the entire loading area Save up to 15% on fuel with CARRYBOY Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included   The GRX cargo area cover from CARRYBOY for the VW Amarok double cab is a stylish but also functional cover. This VW Amarok accessory combines the appealing element of a painted cargo area cover with a polished stainless steel styling bar as a contrast. The optimal mix for the most elegant design on the market! The GRX flat cover for the Volkswagen Amarok double cab adapts seamlessly to the vehicle thanks to the paint finish in the vehicle color. The edges of the load compartment lid are curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. All-round seals lie on the load compartment of your Amarok vehicle and keep water and dust out of the load compartment. Rain drains unhindered through the cover on the edge of your Volkswagen Amarok double cab pickup. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the load compartment cover GRX for the Volkswagen Amarok is made in one piece together with the roll bar, there are no rattling parts, unnecessary places for water to enter or unsightly seams. The cargo area of your VW Amarok double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not sufficient, the loading space can be equipped with our lower edge lighting system Blight as an additional Amarok accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX cargo area cover for the VW Amarok double cab (2010-2020). We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.

Are you looking for a precisely fitting and well-designed cargo area cover? It should not only be functional, but also be a practical success? We at NOVISauto are happy to help you! Expand your double cab pickup truck Maxus T60/T90 2023+ with a high-quality NOVISauto cargo cover from Retrax. Benefit from our strong NOVISauto cargo cover model Retrax - ONEMX from Retrax for your Maxus T60/T90 double cab built in 2023+. The tonneau cover is specifically designed for your pickup truck and tailor-made for the Maxus. Unique, high-quality design in pickup style. It offers your pickup comfortable and high-quality protection. The load compartment cover is delivered with a mounting kit and installation instructions and you can optionally watch our assembly videos on YouTube. If you have any questions, you can contact us at any time. If you wish, we can take care of the professional installation of the load compartment cover. Our employees are technically skilled, professionally competent and practically experienced! Benefit from our strong Retrax load compartment cover model Retrax - ONEMX for your Maxus T60/T90 double cab 2023+. Your NOVISauto cargo cover at a glance: for Maxus T60/T90 Double Cab (Doublecab) built 2023+ NOVISauto cargo cover manufactured by RETRAX Material: Polycarbonate (LEXAN): narrow aluminum-reinforced slats without hinges lockable Operation: manual Special feature: Spiral track system for easy rolling up and down, without torsion spring, made from one piece and no seams particularly suitable for: Leisure open mobile particularly UV-resistant ultra-flat scratch-resistant Installation type: without drilling (for: loading area with distance to the rear wall or loading area with rubber plug) Surface finish: matt black, powder-coated Load capacity: 90 kg Approximate assembly time: 75 min Locking & closure: Locking: any position, two-point locking Laying water drain - Black matt [MX] Our recommendation for your Maxus T60/T90 double cab Our first-class NOVISauto cargo cover Retrax - ONEMX from Retrax for your Maxus T60/T90 2023+ double cab is suitable for every purpose! It is an ideal cover for leisure, for the protection and transport of everyday goods. Use the tonneau for leisure and business! We recommend a fixed cover or a roller blind type blind for primarily commercial use. We recommend that you take a look at our comparison tables for load area covers: https://www.novisauto.de/Downloads-Dokumente/ Best service from a single source - before and after the purchase Use our first-class service! Questions? Uncertainties? Contact us by email or phone! Look forward to detailed and customer-oriented advice . We work in the office AND warehouse every day. We have extensive experience over 16 years of practical performance. Look forward to technically skilled, professionally competent and practically experienced employees. Our unique spare parts (service) offers you spare parts several years after the product has been purchased! This means that your Maxus T60 / T90 double cab (Doublecab) built in 2023 is perfectly equipped with the Retrax - ONEMX load compartment cover. Use your load compartment cover for a lifetime and protect the environment! Load compartment covers from NOVISauto! Is long-term use and therefore sustainability important to you? No problem! The use of high-quality materials, raw materials and parts enables our covers to have a long lifespan and service life. It is precisely this lifelong use that enables us to save valuable resources - sustainability through service life! A strong T60/T90 load compartment cover model Retrax - ONEMX - Double Cab from NOVISauto The RE-60151 cargo cover for your Maxus T60/T90 is opened and closed manually . The Retrax - ONEMX cargo cover from NOVISauto for the Maxus T60/T90 can remain open while driving. There is nothing to stop you loading goods higher than the edge of the cargo area! The cargo cover can be locked using a two-point locking system . This protects your goods from theft, water and dirt. Several keys are included to make it easy to open and close your T60/T90 cargo cover. The cargo area cover is ultra-flat . Thanks to its flat design, the Retrax - ONEMX cover for your Maxus T60/T90 double cab (Doublecab) is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup and don't miss out on the advantages of cargo area covers! Installation without drilling (with: cargo area tray with a gap to the rear wall or loading area with rubber plugs) enables the cargo area cover to be assembled and disassembled quickly and cleanly without leaving any drill holes. We make no compromises when it comes to strength and safety. The Retrax - ONEMX load compartment cover from NOVISauto for your Maxus T60/T90 double cab (Doublecab) built in 2023+ is made of polycarbonate (LEXAN): narrow aluminum-reinforced slats without hinges . High resilience, robustness, stability and durability are the distinguishing features of polycarbonate (LEXAN) . The T60/T90 Retrax - ONEMX load compartment cover has the best basis for every purpose! Approximately 75 minutes are required to install the cover on your Maxus T60/T90. The durable Retrax - ONEMX load compartment cover from NOVISauto is particularly scratch-resistant . This allows for long-term use in top condition without major signs of wear. Equip your Maxus T60/T90 double cab (Doublecab) with a special, UV-resistant RETRAX Retrax - ONEMX load compartment cover. This increases the lifespan of the cover - it is protected from the sun and fading. The Maxus double cab (Doublecab) cover is lockable . Protection from prying eyes and thieves! Leisure : In summary, the Retrax - ONEMX load compartment cover from NOVISauto is particularly suitable for your Maxus T60/T90 double cab (Doublecab) 2023. Spiral track system for easy rolling up and down, no torsion spring, made from one piece and no seams : these are the special features of the load compartment cover. The Retrax - ONEMX load compartment cover can hold 90 kg . A water drain must be laid during assembly. The Retrax Retrax - ONEMX load compartment cover is delivered in matt black [MX] .

Are you looking for a tailor-made and well-designed cargo area cover? It should not only be functional, but also be a practical success? We at NOVISauto are happy to help you! Our NOVISauto cargo area cover model G2 from BAKFlip offers you many advantages over a bare cargo area and is therefore a useful addition to your double cab pickup Ford Ranger & VW Amarok 2023+. Benefit from our recommended NOVISauto cargo area cover model G2 from BAKFlip for your Ford Ranger & VW Amarok double cab built in 2023. Our cargo area cover for your Ford Ranger & VW Amarok double cab built from 2023 adapts seamlessly to your vehicle. High-quality design - keep your beloved pickup style and appearance and give your cargo area that certain something extra! Best protection against rain and dirt - that is one of the advantages of our cargo area cover. The assembly kit and installation instructions are included. You can also watch our assembly videos on YouTube. If you have any questions, you can contact us at any time. If you wish, we will be happy to professionally install the covers for you. Benefit from our strong BAKFlip load area cover model G2 for your Ranger & Amarok double cab built in 2023. Your NOVISauto cargo cover at a glance: for Ford Ranger & VW Amarok Double Cab (Doublecab) built 2023+ NOVISauto cargo cover manufactured by BAKFLIP Material: Aluminium (jacket) 3rd brake light always visible Operation: manual special feature: basic model particularly suitable for: easy application open mobile particularly UV-resistant flat Loading area fully accessible Mounting type: mounting rails and brackets Surface finish: structured: glossy black Frame: Aluminium: matt black Hinges: EPDM hinge housing Load capacity: 135 kg approximate assembly time: 45-60 min Locking & Closure: Snap closure with pull tab Laying water drain Our recommendation for your Ford Ranger & VW Amarok double cab Our first-class NOVISauto cargo cover G2 from BAKFlip for your Ford Ranger & VW Amarok 23+ double cab is suitable for every purpose! It is an ideal tonneau for simple use, for protecting and transporting everyday goods. Use the tonneau for leisure and business! We recommend a fixed cover or a roller blind type blind for primarily commercial use. We recommend that you take a look at our comparison tables for load area covers: https://www.novisauto.de/Downloads-Documents/ Best service - before and after purchase Use our first-class service! Questions? Uncertainties? You can reach us at any time by email or phone! We will be happy to advise you in detail and in a customer-oriented manner . Through our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical performance, we are technically adept, technically competent and practically experienced. We are the only ones in our industry to offer a spare parts service several years after the product has been purchased! This means that your Ford Ranger & VW Amarok double cab (Doublecab) built in 2023+ is perfectly equipped with the load compartment cover model G2. Protect your environment by using our products for a lifetime! Load compartment covers from NOVISauto! Are you worried about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our tonneaus to have a long lifespan and service life. Lifelong use saves valuable resources and leads to sustainability! A strong Ranger cargo cover model G2 - double cab from NOVISauto The BK-226342 load compartment cover for your Ford Ranger & VW Amarok is opened and closed manually . The NOVISauto G2 for the Ford Ranger can be driven open . This allows you to load large items without having to remove the cover! Your Ranger load compartment cover can be locked with a snap fastener + pull tab . This protects your items from theft, water and dirt. The Ranger load compartment cover is well protected by the integrated locking mechanism. The cover for your Ford Ranger can only be unlocked from the inside . The cargo area cover is flat . The flat design makes the G2 cover for your Ford Ranger & VW Amarok double cab particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup and don't miss out on the advantages of cargo area covers! Installation with fastening rails and clips allows the cargo area cover to be more stable. The fastening rails and clips ensure that the cargo area cover sits particularly securely. The shell of our G2 load compartment cover for your Ford Ranger & VW Amarok double cab (Doublecab) built in 2023 is made of aluminum . Aluminum is lightweight and robust . In addition, aluminum is very stable and durable . This makes it an excellent material for the Ranger G2 and is used as required. The third brake light is always visible on the G2 load compartment cover. It takes about 45-60 minutes to install the cover on your Ford Ranger & VW Amarok. The hinges used are EPDM hinge housings . Our BAKFLIP G2 load compartment cover for your Ford Ranger & VW Amarok double cab (Doublecab) offers you special UV resistance . This increases the lifespan of the cover - it is protected from the sun and fading. Enjoy full access from all sides - our load compartment cover does not block access to your load compartment . Load from both sides or the back, as required. In summary, the point " Easy to use " reflects the case for which the G2 cargo cover from NOVISauto is particularly suitable for your Ford Ranger & VW Amarok Double Cab 2023. Basic model : This is the special feature of the cargo cover. The G2 cargo cover can hold 135 kg . You must lay a water drain.

  FLEX is a "tight-to-fold" cover, the optimal solution for your pickup truck. For the Volkswagen Amarok double cab from year of construction 2010. With the FLEX load compartment cover for the VW Amarok, you can drive safely on long stretches of motorway and off-road with the cover closed and open.  FLEX is easy to disassemble, requires no drilling during assembly, and sits flat and flush on the top edge of the cargo box. The FLEX flat cover is the "tight-to-fold" cover that protects your luggage from moisture and moisture. It stays dry in the storage space of your VW Amarok double cab -  and sure ! Each of the 3 folding elements is made of high-quality solid composite plastic, which is lighter, harder and more break-resistant than aluminium. Each of the panels of the cover consists of a high-density foam core with an aluminum cover. Each FLEX cover is fitted with a profile system to which seals and drainage hoses are connected, so that rain and dirty water is drained off to the side from both the inside and the outside. The loading area of the Volkswagen Amarok is thus protected from dust and large-scale water ingress. The snap-lock system on each foldable element ensures that the cover is held securely and securely and protects the loading space from unauthorized access. The FLEX load compartment cover for folding can be securely locked via the tailgate. The cover can be closed, opened 2/3 or completely open. In any case, you save up to 15% on fuel with the cover installed. A "quick release system" allows full flexibility for using the loading area of the Amarok after the initial installation. If unexpectedly large objects are to be transported, the entire cover can be dismantled in no time at all - and reassembled. It is also ideally suited for use with a living room. All this makes FLEX one of the most popular and best-selling covers worldwide.  You can also rely on NOVISAUTO's secure supply of spare parts

  FLEX is a "tight-to-fold" cover, the ultimate solution for your Ford Ranger pickup truck. With FLEX you drive safely on long stretches of motorway and off-road with the cover closed and open.  FLEX is easy to disassemble, requires no drilling during assembly, and sits flat and flush on the top edge of the cargo box. FLEX is the "tight-to-fold" cover that protects your luggage from wet and damp. It stays dry in the storage space -  and sure ! Each of the 3 folding elements is made of high-quality solid composite plastic, which is lighter, harder and more break-resistant than aluminium. In addition, the core is covered with an aluminum cover plate. Each FLEX cover is fitted with a profile system to which seals and drainage hoses are connected, so that rain and dirty water is drained off to the side from both the inside and the outside. All this makes FLEX one of the most popular and best-selling covers worldwide. 

NOVISauto -  Pickup cover for the Volkswagen Amarok double cab. Load compartment cover, load compartment roller blind model RETRAX: The roller blind -   intelligently designed, masterfully manufactured - quality you can feel ! The construction of the Retrax Rolltops improves the aerodynamics of your pickup so much that you reduce your fuel consumption by up to 10%! Matte or gloss finish - powerful and incredibly scratch resistant your robust and stylish way makes your pickup unique Made from one piece - without hinges to avoid wear and freezing Manufactured from a durable thermoplastic  Polycarbonate or also available as an aluminum roller blind - ideal materials for extreme loads in everyday traffic and off-road. easy to handle securely lockable via the tailgate - lockable in any position The load compartment roller blind RETRAX for the Volkswagen Amarok impresses with the flat construction of the cover. The roller blind closes flush with the loading edge, but has enough contact surface on the edge for optimal stability of the cover. The roller blind is set up quickly and easily using clamps. Order the load compartment roller blind in different versions: Either made of a light, but very strong and durable polycarbonate, or in the aluminum roller blind premium version with double-walled slats. The radio control option can also be booked. Would you like to use the loading area of your VW Amarok "double-decker" with the supplied accessories? No problem! Our roller blind also offers crossbar preparation  on. Additional Amarok accessories can be mounted on this (e.g. crossbars, roof baskets, bicycle racks and much more).

NOVISauto - Load compartment cover Solid to fold SOLIDFOLD Oversill - Loadspace cover installed on load sill for Ford Ranger Double Cab 2012+ / 2016+ / 2019+ Composite flat cover (aluminum + honeycomb plastic) Aluminum for resilience (270kg) - honeycomb structure for light weight (approx. 20kg) "Enduracoat" protective cover (shockproof, scratchproof, UV-resistant, non-fading) Surface and frame matt black powder-coated All-round seals attached directly to the loading sill drain water off to the side Tailgate can also be operated when the cover is closed Easy to use - easy to use (because it's light) Cover can be locked securely via tailgate lock (spring clamps) Quick and easy assembly and disassembly in 5 minutes (without drilling) 2 driving positions (closed - 2/3 open). Goods can also be loaded in the last third behind the cab up to the height of the loading sill Can be combined with: load compartment tubs over edge / under edge / bedrug / various accessories Guaranteed fuel savings through improved aerodynamics!

  ULTRAFLEX is a "tight-to-fold" cover, the optimal solution for your pickup truck. With ULTRAFLEX you drive safely on long stretches of motorway and off-road with the cover closed and open.  ULTRAFLEX is easy to disassemble, requires no drilling during assembly, and sits flat and flush on the top edge of the cargo box. Your load is safely protected from moisture and moisture. It stays dry in the storage space -  and sure ! Each of the 3 folding elements is made of high-quality solid composite plastic.  Each cover is fitted with a profile system to which seals and drainage hoses are connected, so that rain and dirty water is drained off to the side from both the inside and the outside. Aluminum panels with matt black coating Underside coated with needle felt - carpet 3-/4-way foldable can be driven open, fully accessible loading space securely lockable, can only be opened with a snap lock Ultra-flat design is flush with the loading sill Multifunctional seal enables the vehicle flap to be used independently of the cover Including LED light bar on the side clamp mounting

BAK MX4 for your Ford Ranger Doublecab 2012-2022 is a premium hard folding tonneau cover - it saves you 10-15% on fuel costs! The BAKFlip MX4 features a durable aluminum matte finish that boasts excellent UV and scratch resistance and an increased density foam core. The MX4 is the upgrade to the G2, equipped with improved latches and an all-new integrated tailgate seal that allows the tailgate to be closed with the cover up or down. BAKFlip MX4 offers all the features of the G2 plus: Improved tailgate operation with premium double seal Durable matte aluminum panels Injection molded lock body for durability. Premium density foam core Extended scratch and abrasion resistance Rated weight up to 200KG evenly distributed weight Why the MX4? The robust year-round pick-up loading area is designed for extreme conditions. Built for everyday use, the MX4's resilient infrastructure includes upgraded components that provide increased resilience to the elements without sacrificing its sleek, low-profile appearance.  The look of the "pure" pickup design is retained thanks to the flat, low-profile design of the cover. The cover is the ideal multifunctional solution for universal, year-round use of your pickup truck!

  Cargo area cover "G2" (aluminium cover) is a "fixed-to-fold" cargo area cover - you save 10-15% on fuel costs! For VW Amarok double cab from year of construction 2010+ The G2 aluminum cover offers 100% full access to the entire load area of the VW Amarok when required, the visibility of the 3rd brake light is guaranteed. When transporting a large load, simply fold the tonneau cover and fold it against the cab. The load compartment cover made of aluminum and other composite materials can be used very flexibly. The durable, solid aluminum sandwich panels are mounted flush with the bed of your Volkswagen Amarok pickup for an extremely low profile design. Thanks to the unique clamping system, installation is child's play. Backwater on the cover is drained out of the truck bed via drain hoses. The new integrated buckle system allows you to keep the tonneau cover open or folded - flipped - closed while driving. The VW Amarok tonneau cover's patented locking system is concealed beneath the tonneau cover - simply latch the tailgate to secure the contents of your flatbed. Premium UV resistance protects your tonneau cover from fading and calcification. The quick release ensures that the cover is easy to put on and take off. Thanks to the flat, low-profile design of the cover, the "pure" Amarok pickup look is retained. The G2 aluminum cover is the ideal multifunctional solution for unlimited use of your VW Amarok pickup truck at the best price-performance ratio. We guarantee you a secure and uncomplicated supply of spare parts for all covers purchased from us. The ideal VW Amarok accessory part.

NOVISauto cargo area cover tarpaulin TRIFECTA for folding for the Volkswagen Amarok Double Cab 2010-2020 Vinyl tarpaulin "Trifecta" for folding Precise processing and selected, resilient materials Thick, high-quality "Heavy Duty" tarpaulin in black with imitation leather embossing Seams secured several times also withstand permanent loads Anodized and black coated aluminum frame Installation without tools within 5 minutes Easy to use with a spring lock Quality seals all around Cover rests on the sill - the seals ensure reliable protection against water and dust Double axle - hinges for commercial use - are not subject to the weather as they are installed under the tarpaulin and protected with seals Lockable with tailgate lock Can be driven open and locked with a convenient lightning bolt buckle Trust our service: even years later you will receive the right spare parts!

NOVISauto cargo area cover tarpaulin TRIFECTA for folding for the Volkswagen Amarok Double Cab 2010-2020 Vinyl tarpaulin "Trifecta" for folding Precise processing and selected, resilient materials Thick, high-quality "Heavy Duty" tarpaulin in black with imitation leather embossing Seams secured several times also withstand permanent loads Anodized and black coated aluminum frame Installation without tools within 5 minutes Easy to use with a spring lock Quality seals all around Cover rests on the sill - the seals ensure reliable protection against water and dust Double axle - hinges for commercial use - are not subject to the weather as they are installed under the tarpaulin and protected with seals Lockable with tailgate lock Can be driven open and locked with a convenient lightning bolt buckle Trust our service: even years later you will receive the right spare parts!

 TruXport for Dodge Ram is a "tarpaulin-to-roll-up" tonneau cover - you save 10-15% on fuel costs! The TruXport cover can be rolled up to the cabin and offers 100% access to the entire cargo area. The TruXport load compartment cover impresses with its ultra-flat profile and aerodynamic design. The tonneau cover can be easily removed and reinstalled in seconds to allow full flexibility and access to your tonneau area. The TruxPort cover allows you to easily open and close the tailgate - even when the cover is open or closed. The flat, low-profile design of the cover preserves the "pure" pickup look. The TruXport cover is the ideal multifunctional solution for unlimited use of your pickup truck!

  BAK Revolver X4 for your RAM is a "fixed-to-roll" type tonneau cover - saving you 10-15% on fuel costs! The turret roller blind cover for your RAM consists of a heavy-duty, coated and load-bearing roller blind, which is supported by many interlocking aluminum cross panels with a surface vinyl structure. The design impresses with the incomparable matt black look when unrolled. The roll-up cover of the "fixed-to-roll" type can be rolled up to the cabin and  offers 100% full access to the entire loading area. Due to the closely spaced aluminum transverse panels  absolute safety guaranteed even while driving, whether rolled up or closed.  Operation with one hand is possible. The Revolver X4 "fixed-to-roll" roller blind impresses with its ultra-flat profile and aerodynamic design. Thanks to the clamping system, assembly is easy and requires no drilling.  The tonneau cover can be easily removed and reinstalled. This allows full flexibility and access to the loading area. Closing the cover also closes the tailgate. The look of the "pure" pickup design is retained thanks to the flat, low-profile design of the cover. The cover is the ideal multifunctional solution for universal, year-round use of your pickup truck!

Carryboy chassis body  Aluminum tray model the perfect service structure on your pickup chassis Standard version: powder coated steel brackets roll bar in front Floor made of non-slip aluminum profiles integrated dirt trap Aluminum rear light guard (optional) All aluminum construction flap safety relatively easy assembly nevertheless: we recommend  assembly by a body shop Mounting kit included Secured supply of spare parts  from the "Authorized Dealer" (Carryboy Germany). We prefer collection by our customers, but we are also happy to deliver as a kit, protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.

  Carryboy chassis body  CSV-Tradesman model for VW Amarok double cab - the perfect service structure for your pickup chassis  - Available in all body colors. Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - Three bright LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - stainless steel rear footboards - certified rear lights protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day),  nonetheless:  we recommend  assembly by a body shop - Mounting kit included Secured supply of spare parts  from the "Authorized Dealer" (Carryboy Germany). In addition, on request, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customers, but we also deliver protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.

  Carryboy chassis body  CSV-Tradesman model for VW Amarok double cab - the perfect service structure for your pickup chassis  - Available in all body colors. Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - Three bright LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - stainless steel rear footboards - certified rear lights protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day),  nonetheless:  we recommend  assembly by a body shop - Mounting kit included Secured supply of spare parts  from the "Authorized Dealer" (Carryboy Germany). In addition, on request, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customers, but we also deliver protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.