Carryboy Hardtop extra height with side flaps WMH-FTD

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

NOVISauto lashing clamps "CARGO CLEATS" - an ingeniously simple lashing system for your pickup loading box  -  installed in minutes ! the optimal alternative for backup  of your transported goods!  No drilling is required to attach the cleats anywhere on the top edge of the cargo box side walls. No damage to paint or sheet metal during installation and under load. The cleats are made of plastic-coated glass, so they are extremely durable and will not rust. Loads of up to around 200 kg are possible and can also be used for most of our luggage compartment covers. Additional CARGO CLEADS are required for larger loads:  always use more CARGO CLEATS to secure your cargo than necessary! - - Sold in pairs, information on attachment and application options, such as tips for knotting, for optimal loading is included. To note:  CARGO CLEATS cannot be used with load compartment tubs that are over the edge (overrail tubs) -  unless the tub is cut out at the relevant attachment points. CARGO CLEATS is not suitable for plastic-coated cargo boxes.    

NOVISauto - pre-compressed, permanently elastic joint sealing tape  for sealing the joint between the hard top or load compartment cover and the vehicle load box. Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover  glued on, previously trimmed a little at the ends.  Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps. A detailed assembly description is enclosed with the delivery.

NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene  

Equip your Ford Ranger extra cab (Spacecab), double cab or single cab (Singlecab) built in 2023+ with a CARRYBOY tailgate damper 111. Increase the usability of your pickup and increase comfort. With accessories from the Comfort & Ease of Use section. Ford Ranger accessories seamlessly adapt to your vehicle. Opt for a bespoke accessory that comes with a mounting kit and installation instructions. If you have any questions, you can contact us at any time. If you wish, we would be happy to professionally assemble the accessories for you. Take advantage of our strong CARRYBOY accessory model tailgate damper 111 from Carryboy for your Ford Ranger extra cab (Spacecab), double cab or single cab (single cab) built in 2023+. Your advantages summarized: for Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab), single cab (Singlecab) year of construction from 2023+ CARRYBOY accessories manufactured by CARRYBOY Accessories designed for comfort & ease of use - black Mounting type: screws approximate assembly time: 10 min special feature: easy opening and high compatibility particularly suitable for: convenient use and simple application Attaches to tailgate and side Storage space approx. 0.5 m³ Our recommendation for your Ford Ranger Extra Cab (Spacecab), Double Cab, Single Cab (Singlecab) Our first-class CARRYBOY accessory tailgate damper 111 from Carryboy for your Ford Ranger 2023+ extra cabin (Spacecab), double cabin or single cabin (Singlecab) is suitable for every purpose! It is an ideal accessory for convenient use and easy application. Use the accessories for leisure and business! Best service - before and after the purchase You can rely on our service! Uncertainties or questions? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Are you concerned about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our accessories to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production. More comfort and increased user-friendliness with CARRYBOY tailgate dampers 111 The accessory Carryboy tailgate damper 111 is delivered in black . The Carryboy CB-111-FT tailgate damper gas pressure spring is installed on the tailgate, on the side . The approximate installation time is 10 minutes on your Ford Ranger. Mounting with screws allows for better stability of the accessories. The accessory is particularly secure thanks to screws. The special features of the accessories are: easy opening and high compatibility . Convenient to use and easy to use : in summary, the CARRYBOY tailgate damper 111 accessory for your Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab) or single cab (Singlecab) from 2023+ is particularly suitable for this.

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Ford Ranger 2012+ for Ford Ranger 2012+ Double Cab / Extra Cab / Single Cab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate

Rüsten Sie Ihren Pickup Truck verschiedener Marken Doppelkabine, Einzelkabine oder Extrakabine Baujahr(e) 2016-24 mit einer hochwertigen Motorhaubenöffner 106 von CARRYBOY aus. Mehr Komfort. Bessere Bedienung. Ihr Pickup – noch benutzerfreundlicher. Mit Zubehör aus der Rubrik Komfort & Benutzerfreundlichkeit. Motorhaubenöffner 106 erhöht die Benutzerfreundlichkeit Ihres Fahrzeugs und integriert sich reibungslos an Ihre Bedürfnisse. Im Lieferumfang enthalten sind ein maßgeschneidertes Montagekit und eine detaillierte Einbauanleitung. Zusätzlich unterstützen unsere anschaulichen YouTube-Videos eine einfache und reibungslose Installation. Und wenn’s doch mal hakt – unser erfahrenes Team ist jederzeit für Sie erreichbar. Auf Wunsch übernehmen unsere technisch versierten und erfahrenen Fachkräfte die fachgerechte Montage Ihres Zubehörs. Somit ist unser Zubehör Modell Motorhaubenöffner 106 das stärkste Model für Ihren Pickup Doppelkabine, Einzelkabine oder Extrakabine Baujahr 2016 - 2024. Unsere CARRYBOY Zubehör - Auf einen Blick - die gesamte Ausstattung: Kompatibilität: Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara, Toyota Hilux Doppelkabine (Doublecab), Einzelkabine (Singlecab), Extrakabine/1, 5-Kabine (Kingcab) Baujahr 2016 - 2024 Qualitätsprodukt: CARRYBOY Zubehör Anwendungsfall: Zubehör geeignet für Komfort & Benutzerfreundlichkeit Montageart: schrauben ungefähre Montagezeit: 15 min besonderes Merkmal: einfaches Öffnen und extrem kurze Einbauzeit besonderes geeignet für: bequeme Nutzung, einfache Anwendung und täglicher Gebrauch Befestigungsort: Motorhaube** Stauraum: ca. 0,5 m³ Unser Service an Sie - vor dem Kauf, als auch nach dem Kauf Unsere Dienste sind auf Ihre Anforderungen zugeschnitten. Ob vor oder nach dem Kauf – unser umfassender Service bietet Ihnen die Unterstützung, die Sie benötigen. Bei Fragen oder Zweifeln stehen wir Ihnen telefonisch oder via E-Mail zur Verfügung. Unser qualifiziertes Team steht Ihnen mit fundiertem Fachwissen, einer freundlichen Haltung und einem Service, der speziell auf Ihre Anforderungen abgestimmt ist, beratend zur Seite. Dank unserer mehr als 16-jährigen Praxiserfahrung gewährleisten wir Zuverlässigkeit. Unser fachkundiges Personal bietet Ihnen dank seiner umfassenden Expertise und langjährigen aktiv in der Branche erworbenen Erfahrungen stets erstklassigen Service. Praktisch. Durchdacht. Langlebig. Eine nachhaltige Produktgestaltung ist uns wichtig. Die Verwendung von hochwertigen Materialien, Rohstoffen und Teilen ermöglicht eine lange Lebens- und Nutzungsdauer unseres Zubehörs. Nachhaltigkeit wird durch eine lebenslange Nutzung und damit das Sparen von Ressourcen zur Neuherstellung erreicht. Mehr Komfort und erhöhte Benutzerfreundlichkeit durch CARRYBOY Motorhaubenöffner 106 Die Montage des Carryboy Motorhaubenöffner CB-106 erfolgt auf der Motorhaube. Die ungefähre Montagezeit beträgt 15 min auf Ihren Pickup Truck. Eine Montage mit schrauben ermöglicht eine bessere Standfestigkeit des Zubehörs. Durch schrauben sitzt das Zubehör besonders sicher an. Einfaches Öffnen und extrem kurze Einbauzeit: Das sind die besonderen Merkmale des Zubehörs. Zusammenfassend spiegeln die Punkte "Bequeme Nutzung, einfache Anwendung und täglicher Gebrauch" den Fall wieder, für welcher das Zubehör Motorhaubenöffner 106 von CARRYBOY für Ihren Pickup Truck Doppelkabine (Doublecab), Einzelkabine (Singlecab), Extrakabine/1 oder 5-Kabine (Kingcab) 2016 - 2024 besonders geeignet ist.

NOVISauto – B-Light / B-Light  is the ultra-bright lighting for your pick-up loading area made of 8 brightly lit LED units, each with 6 LED bulbs. B-Light fits all pickup trucks and models - B-Light brightly illuminates the entire cargo area of your pickup - There is only one switch for the whole light system. B light is suitable for all pickups with any cargo area covers or hardtop.  To protect against slipping loads, B-Light should be mounted under the U-rail on the side.

NOVISauto - edge protection for the pickup tailgate of your Ford Ranger from year of construction 2012+ Effectively and inexpensively protect the scratch-prone upper edge of the tailgate of your 2010-2020 Ford Ranger! The NOVISAuto protective strip for the Ford Ranger tailgate offers long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in loading space liner without edge protection or if the loading space is protected with a coating - because the edges of the loading area are still unprotected with both systems! The protective cap / rubbing strip for the Ford Ranger tailgate was developed for lasting protection against scratches, dents and dents. A close fit with smooth machined edges and durable plastic material make our Ford Ranger Edge Cover Moldings an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.

Saddlebag -  Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away  in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.   

NOVISauto - edge protection for the pick-up loading sill on the right and left of your Ford Ranger double cab from year of construction 2012+ Protect the scratch-prone upper edge of the loading area of your Ford Ranger double cab effectively and inexpensively. The NOVISAuto protective strips for the Ford Ranger sides offer long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in cargo area liner without edge protection or the cargo area is protected with a coating - because the edges of the cargo area of your Ford Ranger are still unprotected with both systems! The protective cap for the Ford Ranger side loading sills was developed for lasting protection against scratches, dents and dents. A close fit with smooth machined edges and durable plastic material make our Ford Ranger Edge Cover Moldings an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

Our BEDMAT is the perfect alternative or addition to a tub. No more awkward kneeling on the hard tub - no more dreary rippled appearance like a standard tub - no more shifting of the load while driving. With BEDRUG for your Ford Ranger 2012+/2019+ you make the right choice. The BEDMAT for the Ranger double cabin is installed in minutes. Thanks to the Velcro fastener, the load compartment mat or carpet can be removed and installed in a very short time. The BEDMAT load compartment carpet for the Ford Ranger double cab pick-up truck is made of the same material as a "normal" standard tub. The load compartment mat is therefore just as easy to care for, robust and practical - thanks to its unique advantages it is even more practical than the standard liner. Custom-fitted to your pickup truck, the BEDMAT is resistant to a wide range of acids and stresses and is made from a single piece. Preserve and protect your load compartment liner and paintwork. The BEDMAT  can also be combined with a "standard" tub. Fits: Spray Tub/No Tub Tailgate part not included! --> order separately: Tailgate Installation with tub not possible --> can be ordered, if required, send us an e-mail

NOVISauto - bed mat model BedMat in universal size for all common and non-common pickup models (also for special editions, extended vehicles) The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area. The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush. The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping. The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas. It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery. Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ). universally applicable for all models Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.  

NOVISauto – SwingCase for the Ford Ranger 2012+ / 2019+ pickup The ultra-practical box for tools, sporting goods and lots of small parts! You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing"  is more needed! NOVISauto, the leader in selling popular Ford Ranger accessories, builds these multi-purpose storage boxes out of high-impact ABS hard plastic for your convenience - strong enough for a long Ranger pickup truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Ford Ranger in all loading lengths. - The purchase of two SwingCases for both sides of your Ford Ranger platform wall is the best choice - space-saving, absolutely tight and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts!  SwingCase can be parked lying down or standing as usual. On the Ford Ranger 2012+, you can fix the SwingCase tool box on the side between the platform door and the wheel housing to save space. SwingCase for your Ford Ranger truck on the passenger side can be swung out and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. The tool box (tool box) and storage box is an essential Ford Ranger accessory for every tradesman or hobby - do-it-yourselfers. Suitable for all Ford Ranger models (XL, XLT, Limited, Wildtrak, Raptor). The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. For Ford Ranger pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.

Load compartment liner over edge for Mercedes X-Class double cab 2018-2020 dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform Including screw points for original lashing rails on the sides of the loading area ideally suited for an exceptionally long service life stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects the paintwork at low cost Made in the USA - no re-import from the Far East. Accesories Tailgate protection with edge protection included assembly description with the necessary mounting accessories

Cargo area liner for Ford Ranger Double Cab 2012+ Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Optimum utilization of the loading area (less clumsy than the original Ranger tub - behind the tailgate directly on the side panel of the vehicle, therefore the maximum loading width is used) Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life including upper edge protection of the tailgate stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects the paintwork at low cost Made in the USA - no re-import from the Far East! Accesories Tailgate protection with edge protection included assembly description with the necessary mounting accessories  

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

NOVISauto - load compartment liner, non-slip model BedRug BFRRD12 for Ford Ranger Double Cab 2012+ dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use continuous fabric-like PP plastic between loading area and tailgate, this effectively protects the hinges of the platform flap Anti-slip surface for safe transport  The innovative and unique BEDRUG load compartment liner made of 100% polypropylene not only protects against impact and damage, but also withstands stress from gravel to battery acid.  

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material:   Materials from the outside:   Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays)   Material from inside:   190 g/sqm rip-stop polyester with PU 2000mm   Bottom material:          210 Denier Oxford Nylon with PU 2000mm Interior:   rust-free aluminum struts ensure structure and comfortable lying   6 cm foam mattress can be removed and cleaned    6 large windows with insect screens   2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size:   Unfolded & erected:           1,340 x 2,165 x 1,343mm   folded:             1,340 x 2,165 x 300mm   Weight:                               56 kg (together with ladder)    

Novisauto Pathfinder-1 roof tent The Novisauto roof tent for every pickup or at least mid-range SUV is one of the first innovative electrically controllable roof tents. You can straighten it up and down with a simple push of a button, alternatively you can also do it by hand. The tent is set up on the vehicle using clamps on cross members. Comfort : Self-erecting by remote control within 60 seconds Power supply via socket of the vehicle (3m cable) spacious interior with enough space for 2 people Reliable protection against wind and rain with extendable telescopic aluminum ladder - loadable up to 150kg with 6cm foam mattress. The cotton cover can be removed and washed. 2 extra hanging pockets for storing shoes, for example double fly screens in front of the windows and the entrance Tent size :   unfolded & erected (inside):      1,200(W) x 2,000(L) x 1,100(H) mm   Weight:                                       56 kg (together with ladder)   Material :   Material outside:   Oxford polyester with silver coating and UPF50+ *   Materials inside:   190 g/sqm ripstop polyester with 2000 mm water column   Bottom material:   210 Denier Oxford Nylon with 2000mm hydrostatic head Interior :   Stainless steel struts provide structure.   6 cm foam mattress can be removed with cover   6 windows with insect screen and privacy screen   2 additional shoe bags  

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

CARRYBOY - Load compartment cover GRX cover with stainless steel bracket for Ford Ranger double cab (years of construction 2012+ / 2019+) with painted roll bar / protective bar with stainless steel inserts can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in white primer, also available in body color securely lockable - two keys incl. locks the entire loading area Save up to 15% on fuel with CARRYBOY Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included   The GRX cargo area cover from CARRYBOY for the Ford Ranger double cab is a stylish, but at the same time functional cover. This Ford Ranger accessory combines the appealing element of a painted tonneau cover with a polished stainless steel styling bar for contrast. The optimal mix for the most elegant design on the market! The flat cover GRX for the Ranger double cab adapts seamlessly to the vehicle thanks to the paint finish in the vehicle color. The edges of the load compartment lid are curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. Wraparound seals wrap around the cargo area of your Ford Ranger vehicle, keeping water and dust out of the cargo area. Rain drains freely over the lid on the edge of your Ford Ranger double cab pickup. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX tonneau cover for the Ford Ranger is made in one piece together with the roll bar, there are no rattling parts, unnecessary places for water entry or unsightly seams. The cargo area of your Ford Ranger double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights ensures good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Ford Ranger accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX tonneau cover for the Ford Ranger double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.   Please note: Although this Ford Ranger accessory fits all Ranger double cab truck beds, it is not compatible with the Limited and Wildtrak uprights. The front protection grille on the XL and XLT models must be removed. The GRX styling bar is mounted in place of the bar mentioned. In this no brake light is embedded! On the XL and XLT, the brake light is mounted on the driver's cab and is visible with the roll bar. The Limited and Wildtrak no longer have this brake light after installation. The brake light is no longer required if the vehicle is registered as a truck.

Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener for Ford Ranger double cab from year of construction 2012 (also 2019+) Cargo area tarpaulin - plastic-laminated, waterproof and robust Installation on loading sill, ideal for building with over edge - loading space tub weatherproof and moisture resistant The tarpaulin is attached with Velcro / can be driven open Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses detailed assembly description - assembly kit included   The CARRYBOY cargo area cover of the vinyl tarpaulin type for the Ford Ranger double cab from year of construction 2012 combines ease of use with an unbeatable price-performance ratio. The load compartment tarpaulin for the Ford Ranger double cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Ford Ranger double cab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality lightning fasteners reliably secure the tarpaulin for the loading area of the Ranger double cab, so that it is also possible to drive with the tarpaulin open. The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the Ford Ranger pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your Ford Ranger double cab loading area. All-round seals reliably keep the elements away from the cargo area. The Carryboy CB-743 soft lid for the Ford Ranger double cab (2012+) can be combined with the current design of the loading area, which has remained unchanged since 2012 and beyond 2019. Water that collects on the vinyl tarpaulin for the Ford Ranger is reliably drained off via the anodised aluminum frame - this keeps the loading area dry. An installation without drilling is possible for all Ford Ranger vehicles with an overhang tub. However, installation with brackets or front protection grilles cannot be carried out. Please note that the Carryboy Softlid CB-743 must be attached directly to the loading sill for installation without an overedge. We recommend blind rivet nuts for this. As an alternative to shipping the tarpaulin, we also offer an on-site installation service.

CARRYBOY - Load compartment cover lid with motor lift SMX2-FTD for Ford Ranger double cab from year of construction 2012 Two electric motors raise the cover to cabin height Save up to 15% on fuel thanks to aerodynamics Thanks to GRP, the cover is robust in everyday use ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses Paintwork in body color possible lockable - two keys incl. Connection to the central locking of the driver's cab Lid can be moved open Suitable for transporting tall objects

Carryboy Roller Lid aluminum roller blind roll cover CB-789-FTD for Ford Ranger Double Cab 2023+ Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with lower edge - load compartment tub detailed assembly description - assembly kit included only suitable without front protection grille, stainless steel bar or Wildtrak bar   The Rollerlid 789 for the Ford Ranger double cab is an aluminum roller blind for retrofitting on your Ford Ranger double cab. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not essential. The aluminum roller blind from CARRYBOY for the Ford Ranger double cab is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The ergonomic grip strip for operating the Ford Ranger roller blind has a good grip thanks to the ribbing - even in wet weather! The Rollerlid 789 for the Ranger double cab is installed flat at the height of the loading sill. Rainwater that falls on the Ford Ranger's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Ford Ranger double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Ford Ranger accessory.  

Carryboy Roller Lid aluminum roller blind roll cover CB-789-FTD for Ford Ranger Double Cab 2012+ Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with lower edge - load compartment tub detailed assembly description - assembly kit included only suitable without front protection grille, stainless steel bar or Wildtrak bar   The Rollerlid 789 for the Ford Ranger double cab is an aluminum roller blind for retrofitting on your Ford Ranger double cab. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not essential. The aluminum roller blind from CARRYBOY for the Ford Ranger double cab is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The ergonomic grip strip for operating the Ford Ranger roller blind has a good grip thanks to the ribbing - even in wet weather! The Rollerlid 789 for the Ranger double cab is installed flat at the height of the loading sill. Rainwater that falls on the Ford Ranger's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Ford Ranger double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Ford Ranger accessory.  

Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you! The high-quality Carryboy load compartment cover model 899 is the perfect extension for your Ford Ranger 2023+ double cab pickup. Benefit from our strong Carryboy cargo area cover model 899 for your Ford Ranger double cab built between 2023 and 2023. Our cargo area cover for your Ford Ranger double cab (doublecab) from year of construction 2023 adapts seamlessly to your vehicle. Combine high-quality design with the best protection for your cargo area, without having to forego the classic, beloved style of a pickup truck! Your pickup is offered a comfortable and high-quality protection. Mounting kit and installation instructions are included. Optionally, you can watch our assembly videos on Youtube. If you have any questions, you can contact us at any time. If necessary, we take over the professional construction of the load compartment cover. Our employees are technically adept, professionally competent and have practical experience! Benefit from our strong Carryboy cargo area cover model 899 for your Ranger double cab built in 2023 - 2023. A strong Ranger tonneau cover model 899 - double cab, electric by CARRYBOY The load compartment cover CB-899-B-FRD for your Ford Ranger allows easy opening and closing of the cover through electrical operation . The CARRYBOY 899 for the Ford Ranger can be driven open . This allows large goods to be loaded without having to remove the cover! Your Ranger load compartment cover can be locked using an automatic lock. This protects your goods from theft, water and dirt. The Ranger cargo area cover is well protected by the integrated lock. The cover for your Ford Ranger can only be unlocked from the inside . The tonneau cover is flat . Thanks to its flat design, the 899 cover for your Ford Ranger double cab is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup truck and don't miss out on the advantages of tonneau covers! Mounting with mounting rails and brackets allows the load compartment cover to be more stable. The load compartment cover is particularly secure thanks to fastening rails and clips. The load compartment cover 899 from CARRYBOY for your Ford Ranger double cab (Doublecab) year of construction 2023 - 2023 is made of aluminium . The load compartment cover Ranger 899 combines a low dead weight, robustness, stability and durability as properties and requirements. For this reason, the load compartment covers use aluminum as the material. The third brake light is always visible on the load compartment cover 899. The approximate fitting time is 1-3 hours on your Ford Ranger. Equip your Ford Ranger double cab (Doublecab) with a special, UV-resistant CARRYBOY 899 cargo area cover. This increases the life of the cover - it is protected from the sun and fading. Enjoy full access from all sides - our tonneau cover will not block access to your cargo area . Load from both sides or the back, depending on your needs. The Ranger double cab (Doublecab) cover is lockable with remote control . Protection against sneaky eyes and thieves! The load compartment cover can only be unlocked from the inside . In summary, the points "" Convenient use, leisure and daily use "" reflect the case for which the CARRYBOY tonneau cover 899 for your Ford Ranger Double Cab (Doublecab) 2023 - 2023 is particularly suitable . The special features of the load compartment cover are: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof . You can order the Carryboy 899 load compartment cover coated . The entire equipment at a glance: for Ford Ranger double cab (Doublecab) year of construction 2023 - 2023 CARRYBOY trunk cover manufactured by CARRYBOY Material: aluminum 3rd. Brake light always visible lockable with remote control Operation: electric special feature: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof particularly suitable for: convenient use, leisure and daily use mobile when open particularly UV-resistant flat Loading area fully accessible Type of mounting: mounting rails and brackets can only be unlocked from the inside Surface finish: structured: glossy black Transverse arches/slats: aluminium Frame: aluminum: matt black approximate assembly time: 1-3 h Locking & Closure: Automatic locking coated Our recommendation for your Ford Ranger double cab Our first-class CARRYBOY cargo area cover 899 from Carryboy for your Ford Ranger 2023 - 2023 double cab is suitable for every purpose! It is an ideal tonneau for convenient use, leisure and daily use, protecting and transporting everyday goods. Use the tonneau for leisure and business! We recommend fixed covers or a roller blind type blind for primarily commercial use. We recommend checking out our tonneau cover comparison charts: https://www.novisauto.de/Downloads-Documents/ Best service - before and after the purchase Use our first class service! Questions? uncertainties? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . We work every day in the office AND warehouse. We have an extensive wealth of experience over 16 years of practical performance. You can look forward to technically experienced, professionally competent and practically experienced employees. When the ravages of time are at work: Our unique spare parts (service) offers you spare parts for several years after product purchase! Your Ford Ranger double cab (Doublecab) year of construction 2023 - 2023 is well equipped with our load compartment cover 899. Protect your environment by using our products for life! Cargo area covers from CARRYBOY! Are you concerned about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our covers to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production.

carryboy  Roller Lid Model CB-789F-FTD for Ford Ranger Double Cab 2012+ Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Lateral cross member rails made of aluminum with elegant, robust and painted (anthracite) GRP frame Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with lower edge - load compartment tub detailed assembly description - assembly kit included only suitable without front protection grille or other roll bars   The Rollerlid 789F for the Ford Ranger double cab is an aluminum roller blind for retrofitting on your Ranger double cab pickup. The aluminum blind closes evenly with the edge of the tailgate. On the sides of the loading area, it has elegant, gray lacquered sockets for the integrated cross member bracket. The crossbeams can be slid to any position on an aluminum longitudinal beam rail that is integrated directly into the frame. Expand the standard aluminum roller blind for the Ford Ranger double cab with a practical cross member preparation. You get the complete pick-up loading space for smaller items to be transported, while bulky items (e.g. bicycles, roof tent) can be accommodated on the cross members. Due to the wide contact surface of the aluminum roller blind 789F on the loading sill of the Ford Ranger, additional loads can easily be applied to the roller blind via the cross members. The aluminum roller blind from CARRYBOY for the Ford Ranger is available with aluminum-colored slats or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind for the Ranger double cab is particularly robust and resilient. The ergonomic grip strip for operating the Ford Ranger double cab aluminum roller blind has a good grip thanks to the ribbing - even in wet weather! Rainwater that falls on the Ford Ranger's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Ford Ranger double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Ford Ranger accessory.  

CARRYBOY - load compartment cover lid GRXR-FTD for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket Ford Ranger Wildtrak accessories - load compartment cover with lid and gas springs for installation with original Wildtrak roll bar, Wildtrak styling bar Only for installation with genuine Ford Ranger Wildtrak roll bar can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in 42A anthracite (color of Wildtrak frame) or with delivery time in vehicle color securely lockable - two keys incl. NOW NEW AS STANDARD: CENTRAL LOCKING OF THE COVER locks the entire loading area securely Save up to 15% on fuel with CARRYBOY Can be used with the original load compartment tub detailed assembly description - assembly kit included Note: The 2019+ Ford Ranger has a cargo area liner with large ridges behind the tailgate. Here the upper part of the bead must be cut off before assembly in order to be able to assemble the cover with an absolutely precise fit. The cut can easily be made with a knife or saw. Behind the bead there is a cavity without cables or sheet metal. The GRX cargo area cover from CARRYBOY for the Ford Ranger Wildtrak double cab from year of construction 2012 is a stylish, but at the same time functional cover. This Ford Ranger Wildtrak Accessory combines the appealing element of a painted tonneau cover with the genuine Ford Ranger Wildtrak Upright. The optimal mix for the most elegant design on the market! Order the GRX cover for the Ranger Wildtrak and the Ford Ranger Raptor in either the standard color of the Wildtrak roll bar or in the body color of your Ford Ranger. The GRX flat cover for the Ford Ranger Wildtrak double cab adapts seamlessly to the vehicle and the Wildtrak bracket thanks to the high-quality paintwork. The edge of the luggage compartment lid on the tailgate is curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. The load compartment cover for the Ford Ranger Wildtrak is pushed directly between the original Wildtrak bracket with fastening rails. Sealing with a sealing seam and the water catcher on the load compartment cover reliably drain rain away from the load area. Water runs into the side channels of the cover and is routed out of the cargo area with drain hoses. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX load compartment cover for the Ford Ranger Wildtrak, Ford Ranger Raptor is made of one piece, there are no rattling parts, unnecessary places for water entry or unsightly seams. Multi-hardened hinges and a thick lamination of the Ford Ranger Wildtrak tonneau cover withstand even the most difficult weather! The cargo area of your Wildtrak double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Ford Ranger Wildtrak accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX tonneau cover for the Ranger Wildtrak and Ranger Raptor double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.

CARRYBOY - load compartment cover lid GRXR-FTD for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket Ford Ranger Wildtrak accessories - load compartment cover with lid and gas springs for installation with original Wildtrak roll bar, Wildtrak styling bar Only for installation with genuine Ford Ranger Wildtrak roll bar can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in 42A anthracite (color of Wildtrak frame) or with delivery time in vehicle color securely lockable - two keys incl. NOW NEW AS STANDARD: CENTRAL LOCKING OF THE COVER locks the entire loading area securely Save up to 15% on fuel with CARRYBOY Can be used with the original load compartment tub detailed assembly description - assembly kit included Note: The 2019+ Ford Ranger has a cargo area liner with large ridges behind the tailgate. Here the upper part of the bead must be cut off before assembly in order to be able to assemble the cover with an absolutely precise fit. The cut can easily be made with a knife or saw. Behind the bead there is a cavity without cables or sheet metal. The GRX cargo area cover from CARRYBOY for the Ford Ranger Wildtrak double cab from year of construction 2012 is a stylish, but at the same time functional cover. This Ford Ranger Wildtrak Accessory combines the appealing element of a painted tonneau cover with the genuine Ford Ranger Wildtrak Upright. The optimal mix for the most elegant design on the market! Order the GRX cover for the Ranger Wildtrak and the Ford Ranger Raptor in either the standard color of the Wildtrak roll bar or in the body color of your Ford Ranger. The GRX flat cover for the Ford Ranger Wildtrak double cab adapts seamlessly to the vehicle and the Wildtrak bracket thanks to the high-quality paintwork. The edge of the luggage compartment lid on the tailgate is curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. The load compartment cover for the Ford Ranger Wildtrak is pushed directly between the original Wildtrak bracket with fastening rails. Sealing with a sealing seam and the water catcher on the load compartment cover reliably drain rain away from the load area. Water runs into the side channels of the cover and is routed out of the cargo area with drain hoses. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX load compartment cover for the Ford Ranger Wildtrak, Ford Ranger Raptor is made of one piece, there are no rattling parts, unnecessary places for water entry or unsightly seams. Multi-hardened hinges and a thick lamination of the Ford Ranger Wildtrak tonneau cover withstand even the most difficult weather! The cargo area of your Wildtrak double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Ford Ranger Wildtrak accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX tonneau cover for the Ranger Wildtrak and Ranger Raptor double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.

Carryboy aluminum cover roll cover CB-789R  for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with the lower edge of the load compartment tub and the original bracket/styling bar detailed assembly description - assembly kit included only suitable with original Ford Ranger Wildtrak bracket PLEASE NOTE: This cover fits all 2012 to present / 2019 to present cargo area liners however are fitted with a large bead on the tailgate. With such tubs, an adjustment is required in order to be able to insert the headband through the bead. The Rollerlid 789R for the Ford Ranger Wildtrak and the Ford Ranger Raptor is an aluminum roller blind for retrofitting on your Ford Ranger with Wildtrak roll bar. The roller blind is installed between the jaws of the Wildtrak styling bar. The roll cover for the Wildtrak is installed on a rail mounting system, which is also included in the scope of delivery. A convenient pull tab allows the blind to be operated from the tailgate. The integrated torsion spring ensures that the blind opens automatically. Latching options on the tailgate and the center of the blind also allow extra-long items to be transported on the loading area. The aluminum roller blind from CARRYBOY for the Ford Ranger Wildtrak is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The rounded surface structure gives the Carryboy aluminum roller blind 789R for the Ford Ranger Wildtrak and Ford Ranger Raptor a unique and extremely elegant look. The Rollerlid 789R for the Ranger Wildtrak and the Ranger Raptor double cab is installed flat at the height of the loading sill. Rainwater that falls on the Wildtrak's loading space is safely kept away from the loading space via drain hoses on the roller blind box and on the tailgate. The CARRYBOY Wildtrak roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate and is therefore a secure and flexible closure. 4 drain hoses, 2 each on the tailgate and 2 on the roller blind box behind the cab of the Ford Ranger Wildtrak allow all water to be drained off comprehensively - for the most effective protection against water and dust.    

Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you! Our Carryboy cargo area cover model 899 offers you many advantages over a bare cargo area platform and is therefore a useful addition to your double cab pickup Isuzu D-Max 2021+. Benefit from our recommended Carryboy cargo area cover model 899 for your Isuzu D-Max double cab model year 2021 to 2023. The tonneau cover was developed specifically for your pickup truck and is tailor-made for the D-Max. Unique, high-quality pickup-style design. Protect your pickup conveniently and with high quality. Mounting kit and installation instructions are included. You can also watch our assembly videos on Youtube. If you have any questions, you can contact us at any time. On request, we can take care of the professional construction of the load compartment cover. Our employees are technically adept, professionally competent and have practical experience! Benefit from our strong Carryboy cargo area cover model 899 for your D-Max double cab built between 2021 and 2023. A strong D-Max tonneau cover model 899 - double cab, electric from CARRYBOY The load compartment cover CB-899.9 for your Isuzu D-Max enables easy opening and closing of the cover through electrical operation . The load compartment cover 899 from CARRYBOY for the Isuzu D-Max can remain open while driving. Nothing stands in the way of loading goods higher than the edge of the loading space! Your D-Max load compartment cover can be locked using an automatic lock. Your D-Max is thus safely protected from thieves and stealing eyes. The D-Max cargo area cover is well protected by the integrated lock. The cover for your Isuzu D-Max can only be unlocked from the inside . The tonneau cover is flat . Due to its flat design, the cover 899 for your Isuzu D-Max double cab (Doublecab) is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup truck and don't miss out on the advantages of tonneau covers! Mounting with mounting rails and brackets allows the load compartment cover to be more stable. The load compartment cover is particularly secure thanks to fastening rails and clips. The 899 load compartment cover from CARRYBOY for your Isuzu D-Max double cab (Doublecab) year of construction 2021 - 2023 is made of aluminium. Low weight, robustness, stability and durability are the special properties of aluminium . Among other things, the tonneau cover 899 for your D-Max uses aluminum for this reason. The third brake light is always visible on the load compartment cover 899. The approximate fitting time is 1-3 hours on your Isuzu D-Max. The load compartment cover CARRYBOY 899 for your Isuzu D-Max double cab (Doublecab) is particularly UV-resistant . This increases the life of the cover - it is protected from the sun and fading. Enjoy full access from all sides - our tonneau cover will not block access to your cargo area . Load from both sides or the back, depending on your needs. The cargo area cover for your D-Max double cab (Doublecab) is lockable with a remote control . Protection against sneaky eyes and thieves! The load compartment cover can only be unlocked from the inside . In summary, the CARRYBOY tonneau cover 899 for your Isuzu D-Max double cab (Doublecab) 2021 - 2023 is particularly suitable for: Comfortable use, leisure and daily use . The special features of the load compartment cover are: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof . You can order the Carryboy 899 load compartment cover coated . Your CARRYBOY cargo area cover at a glance: for Isuzu D-Max double cab (Doublecab) year of construction 2021 - 2023 CARRYBOY trunk cover manufactured by CARRYBOY Material: aluminum 3rd. Brake light always visible lockable with remote control Operation: electric special feature: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof particularly suitable for: convenient use, leisure and daily use mobile when open particularly UV-resistant flat Loading area fully accessible Type of mounting: mounting rails and brackets can only be unlocked from the inside Surface finish: structured: glossy black Transverse arches/slats: aluminium Frame: aluminum: matt black approximate assembly time: 1-3 h Locking & Closure: Automatic locking coated Our recommendation for your Isuzu D-Max double cab Our first-class CARRYBOY cargo area cover 899 from Carryboy for your Isuzu D-Max 2021 - 2023 double cab is suitable for every purpose! It is an ideal cover for convenient use, leisure and daily use, protecting and carrying everyday goods. Use the covers for leisure and business! We recommend a fixed tonneau or roller blind type blind for primarily commercial use. We recommend checking out our tonneau cover comparison charts: https://www.novisauto.de/Downloads-Documents/ Best service - before and after the purchase Use our first class service! Questions or uncertainties? Contact us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . We work every day in the office AND warehouse. We have an extensive wealth of experience over 16 years of practical performance. You can look forward to technically experienced, professionally competent and practically experienced employees. When the ravages of time are at work: Our spare parts service, which is unique in the industry, offers you spare parts for several years after you have purchased the product! So your Isuzu D-Max double cab (Doublecab) year of construction 2021 - 2023 is well equipped with the load compartment cover model 899. Protect your environment by using our products for life! Cargo area covers from CARRYBOY! Is long-term use and thus sustainability important to you? No problem! The use of high-quality materials, raw materials and parts enables our bins to have a long service life and useful life. It is precisely this lifelong use that enables valuable resources to be saved - sustainability through useful life!

Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you! The high-quality Carryboy load compartment cover model 899 is the perfect extension for your double cab pickup Toyota Hilux Revo 2016+. Benefit from our recommended Carryboy cargo area cover model 899 for your Toyota Hilux double cab year of construction 2016 to 2023. The Toyota Hilux cargo area cover adapts seamlessly to your vehicle. High-quality design - keep your beloved pick-up style and appearance and give your cargo area that little something extra! Your pickup is offered a comfortable and high-quality protection. Mounting kit and installation instructions are included. If necessary, you can watch our assembly videos on Youtube. If you have any questions, you can contact us at any time. On request, we can take care of the professional construction of the load compartment cover. Our employees are technically adept, professionally competent and have practical experience! Benefit from our strong Carryboy cargo area cover model 899 for your Hilux double cab built between 2016 and 2023. A strong Hilux tonneau cover model 899 - double cab, electric from CARRYBOY The load compartment cover CB-899.10 for your Toyota Hilux enables the cover to be opened and closed easily thanks to electrical operation . The load compartment cover 899 from CARRYBOY for the Toyota Hilux can remain open while driving. Nothing stands in the way of loading goods higher than the edge of the loading space! The load compartment cover can be locked using an automatic lock. Your Hilux is thus safely protected from thieves and prying eyes. The Hilux load compartment cover is well protected by the integrated locking mechanism. The cover for your Toyota Hilux can only be unlocked from the inside . The tonneau cover is flat . Thanks to its flat design, the 899 cover for your Toyota Hilux double cab is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup truck and don't miss out on the advantages of tonneau covers! Mounting with mounting rails and brackets allows the load compartment cover to be more stable. The load compartment cover is particularly secure thanks to fastening rails and clips. The 899 load compartment cover from CARRYBOY for your Toyota Hilux double cab (Doublecab) year of construction 2016 - 2023 is made of aluminum . Low weight, robustness, stability and durability are the special properties of aluminium . Among other things, the load compartment cover 899 for your Hilux uses aluminum for this reason. Enjoy an always visible 3rd brake light on the load compartment cover - the approximate installation time is 1-3 hours on your Toyota Hilux. Equip your Toyota Hilux double cab (Doublecab) with a special, UV-resistant CARRYBOY 899 cargo area cover. This increases the life of the cover - it is protected from the sun and fading. Enjoy full access from all sides - our tonneau cover will not block access to your cargo area . Load from both sides or the back, depending on your needs. The Hilux double cab (Doublecab) cover is lockable with remote control . Protection against sneaky eyes and thieves! Our load compartment cover can only be unlocked from the inside . In summary, the points "" Convenient use, leisure and daily use "" reflect the case for which the CARRYBOY tonneau cover 899 for your Toyota Hilux Doublecab 2016 - 2023 is particularly suitable . Spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality appearance, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof : these are the special features of the luggage compartment cover. You can order the Carryboy 899 load compartment cover coated . Your CARRYBOY cargo area cover at a glance: for Toyota Hilux double cab (Doublecab) year of construction 2016 - 2023 CARRYBOY trunk cover manufactured by CARRYBOY Material: aluminum 3rd. Brake light always visible lockable with remote control Operation: electric special feature: spiral track system for problem-free rolling up and down, electrically opening: motor hub, high-quality optics, robust, stable 2.5 cm double-walled aluminum slats, versatile and weatherproof particularly suitable for: convenient use, leisure and daily use mobile when open particularly UV-resistant flat Loading area fully accessible Type of mounting: mounting rails and brackets can only be unlocked from the inside Surface finish: structured: glossy black Transverse arches/slats: aluminium Frame: aluminum: matt black approximate assembly time: 1-3 h Locking & Closure: Automatic locking coated Our recommendation for your Toyota Hilux double cab Our first-class CARRYBOY cargo area cover 899 from Carryboy for your Toyota Hilux 2016 - 2023 double cab is suitable for every purpose! It is an ideal cover for convenient use, leisure and daily use, protecting and carrying everyday goods. Use the tonneau for leisure and business! We recommend a fixed tonneau or roller blind type blind for primarily commercial use. We recommend checking out our tonneau cover comparison charts: https://www.novisauto.de/Downloads-Documents/ Best service - before and after the purchase Rely on our service! uncertainties? Questions? Talk to us by email or phone! Look forward to detailed and customer-oriented advice . We work every day in the office AND warehouse. We have an extensive wealth of experience over 16 years of practical performance. You can look forward to technically experienced, professionally competent and practically experienced employees. Should parts nevertheless break after use: Our spare parts service, which is unique in the industry, offers you spare parts for several years after you have purchased the product! Our load compartment cover 899 complements your Toyota Hilux double cab (Doublecab) year of construction 2016 - 2023 perfectly. Protect your environment by using our products for life! Cargo area covers from CARRYBOY! Are you concerned about sustainability or long-term use? No problem! A long service life and useful life of our tonneau is made possible by the use of high-quality parts, raw materials and materials. Lifelong use saves valuable resources and leads to sustainability!

Carryboy aluminum cover roll cover CB-789R  for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with the lower edge of the load compartment tub and the original bracket/styling bar detailed assembly description - assembly kit included only suitable with original Ford Ranger Wildtrak bracket PLEASE NOTE: This cover fits all 2012 to present / 2019 to present cargo area liners however are fitted with a large bead on the tailgate. With such tubs, an adjustment is required in order to be able to insert the headband through the bead. The Rollerlid 789R for the Ford Ranger Wildtrak and the Ford Ranger Raptor is an aluminum roller blind for retrofitting on your Ford Ranger with Wildtrak roll bar. The roller blind is installed between the jaws of the Wildtrak styling bar. The roll cover for the Wildtrak is installed on a rail mounting system, which is also included in the scope of delivery. A convenient pull tab allows the blind to be operated from the tailgate. The integrated torsion spring ensures that the blind opens automatically. Latching options on the tailgate and the center of the blind also allow extra-long items to be transported on the loading area. The aluminum roller blind from CARRYBOY for the Ford Ranger Wildtrak is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The rounded surface structure gives the Carryboy aluminum roller blind 789R for the Ford Ranger Wildtrak and Ford Ranger Raptor a unique and extremely elegant look. The Rollerlid 789R for the Ranger Wildtrak and the Ranger Raptor double cab is installed flat at the height of the loading sill. Rainwater that falls on the Wildtrak's loading space is safely kept away from the loading space via drain hoses on the roller blind box and on the tailgate. The CARRYBOY Wildtrak roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate and is therefore a secure and flexible closure. 4 drain hoses, 2 each on the tailgate and 2 on the roller blind box behind the cab of the Ford Ranger Wildtrak allow all water to be drained off comprehensively - for the most effective protection against water and dust.    

Carryboy cargo area cover with bracket R-798-FTD for Ford Ranger with roll bar / protection bar Individual design elements depending on the vehicle can be moved with ease thanks to the ingenious rail system Save up to 15% on fuel with CARRYBOY insensitive in daily use exceptionally long service life stable and easy to use Offer in white primer, also available in body color lockable - two keys included Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included Locks the entire loading area with just one key  

Carryboy - Ford Ranger double cab hardcover - fixed cover to fold up - model SLX-FTD with highly polished stainless steel roll bar / protection bar opens with the help of shock absorber gas pressure springs Fixed cover in white primer, also available in body color insensitive in robust use and easy to handle GRP composite structure with water leakage and break protection - UV durability  for a variety of commercial uses save up to 15% on fuel with Carryboy Resistant and rustproof stainless steel hinges and robust flush-mounted locks on the back protect against theft  lockable - two keys - easy to open and close  of the entire cargo space Can also be used with over-edge and under-edge load compartment tub LED interior light 3. Driver's cab brake light remains visible matt black interior lining detailed assembly description - assembly kit included Delivery on disposable pallet The Carryboy cargo area cover is characterized by its exceptionally long service life, high stability and easy repairs. Are you looking for a practical load compartment cover for your Ford Ranger?  How about an extremely stable, non-rattling lid made of easy-care GRP? The SLX model for your Ford Ranger already includes an elegant, polished stainless steel roll bar. This styling bar perfectly suits the streamlined and fresh lifestyle of your  Rangers and the tonneau cover. Of course, the load compartment cover with a matching roll bar can also be painted in the color of your car. The SLX cargo area cover from Carryboy for the Ford Ranger (double cab from year of construction 2012) is a stylish, but at the same time functional cover. This cover combines the appealing element of a painted tonneau cover with a polished stainless steel styling bar for contrast. An optimal mix for this most elegant design! The SLX flat cover for the Ford Ranger double cab has a painted lid with a painted base for the stainless steel roll bar. The edges of the load compartment lid are curved over the edge of the vehicle. Wraparound seals wrap around your vehicle's cargo area, keeping water and dust out of the cargo area. Rain drains freely over the lid on the edge of your Ford Ranger double cab pickup. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. The high-quality, thickly laminated GRP material offers a multitude of advantages in daily use: In addition to high resistance to breakage and high stability, it is also very easy to repair when used later. The cargo area of your Ranger double cab pickup can be brightly lit. The integrated interior light with 2 rows of bright LED lamps provides good lighting in the load compartment. If this is still not enough, we recommend our 'Blight' under-edge light system as another Ford Ranger accessory. The styling bar/roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.   Please note: The cover does not have its own 3rd brake light. If the load compartment cover SLX is to be mounted on the 'Wildtrak' or 'Limited', the brake light is omitted. However, the 3rd brake light is not required for truck registration.

Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener for Ford Ranger double cab model years 2005-2011 Cargo area tarpaulin - plastic-laminated, waterproof and robust Elegant knobbed finish on the surface Anodized aluminum frame with integrated tarpaulin Fixation of the rolled up tarpaulin on three belt buckles All-round seals against water ingress into the cargo area Tarpaulin can be opened from the outside weatherproof and moisture resistant Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use Can be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The CARRYBOY tonneau cover of the vinyl tarpaulin type for the Ford Ranger double cab 2005-2010 combines ease of use with an unbeatable price-performance ratio. The load compartment tarpaulin for the previous model Ford Ranger double cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Ford Ranger Double Cab 2005-2011 guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality lightning fasteners reliably secure the tarpaulin for the loading area of the Ranger double cab, so that it is also possible to drive with the tarpaulin open. Locks on both sides that can be operated from the outside ensure easy unlocking of the cover. The surface of Carryboy's soft lid consists of a dark gray knobbed surface that makes this vinyl tarpaulin for the Ford Ranger Double Cab Pickup (2005-2011) unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your Ford Ranger double cab loading area. All-round seals reliably keep the elements away from the cargo area. The load compartment cover 743 of the type "tarpaulin for rolling up with Velcro" has been specially developed for installation with an over-edge load compartment tub. For Ford Ranger double cab pickups without a load compartment liner with edge protection, we recommend a consultation in advance. Installation without drilling is only possible with a trough of the type mentioned. An installation on the Ford Ranger 2005-2011 without tub is also possible. For professional installation in a specialist workshop or on your own, we recommend using blind rivet nuts. Detailed assembly instructions are included.

Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you! Expand your double cab pickup truck from 2023+ with a high-quality CARRYBOY cargo area cover from Carryboy. Benefit from our recommended CARRYBOY cargo area cover model 743 from Carryboy for your Ford Ranger double cab from year of construction 2023+. The Ford Ranger tonneau cover seamlessly fits your vehicle. Combine high-quality design with the best protection for your cargo area, without having to forego the classic, beloved style of a pickup truck! The load compartment cover offers your pickup high-quality and convenient protection. Opt for a tailor-made tonneau cover that comes with a fitting kit and installation instructions. If you have any questions, you can contact us at any time. Let our technically experienced, professionally competent and practically experienced employees install your load compartment cover on request! Benefit from our strong Carryboy load compartment cover model 743 for your Ford Ranger from 2023+. The entire equipment at a glance: for Ford Ranger double cab year of construction from 2023 CARRYBOY trunk cover manufactured by CARRYBOY Material: Vinyl: Black Operation: manual special feature: easy to open particularly suitable for: simple application mobile when open overlying Loading area fully accessible Mounting type: rails and drilling Surface finish: matte black Tension control: automatic approximate assembly time: 30-45 min Latch & Closure: Velcro and spring clip closure Our recommendation for your Ford Ranger double cab Our first-class CARRYBOY cargo area cover 743 from Carryboy for your Ford Ranger from 2023 double cab is suitable for every purpose! It is an ideal tonneau for easy use, protecting and transporting everyday goods. Use the cover for leisure and business! We recommend a fixed tonneau or roller blind type blind for primarily commercial use. We recommend checking out our tonneau cover comparison charts : https://www.novisauto.de/Downloads-Documents/ Our service to you - before and after the purchase Rely on our service! Questions? uncertainties? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Our unique spare parts (service) offers you spare parts for several years after product purchase! Your Ford Ranger double cab (Doublecab) from year of construction 2023 is therefore optimally equipped with the load compartment cover model 743. Protect your environment by using our products for life! Cargo area covers from CARRYBOY! Is sustainability and long-term use of the product important to you? No problem! High-quality materials, parts and raw materials enable our tonneau to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production. High-quality Ford Ranger load compartment cover model 743 - extra cabin from CARRYBOY The CB-743-FRD tonneau cover for your Ford Ranger opens and closes manually . Thanks to the outstanding advantage of an open, mobile load compartment cover 743 from CARRYBOY for the Ford Ranger, you no longer have to think about whether something fits in the load compartment or not. Just charge, leave the cover open, no problem! The luggage compartment cover can be locked with a spring clamp . Your ranger is thus safely protected from thieves and prying eyes. The Navara load compartment cover is well protected thanks to the integrated locking mechanism. The cover for your Ford Ranger can also be unlocked from the outside . The load compartment cover is on top . As a result, the 743 cover nestles up against the shape of the flatbed and greatly increases the design, appearance and visual value of your Ford Ranger Double Cab (Doublecab) from 2023+. Mounting with rails and drilling allows for better stability of the load compartment cover. The load compartment cover is particularly secure thanks to rails and drilling. The 743 cargo area cover from CARRYBOY is made of vinyl: black for your  Ford Ranger double cab (Doublecab) year of construction from 2023+. For simple, everyday use in the private sector, vinyl is suitable for your Ranger due to its favorable price-performance ratio. Benefit from longevity, (UV) resistance and easy handling. It takes approximately 30-45 minutes to fit the cover on your Ford Ranger. The cover has an automatic tension control , so the product always stays tensioned. Enjoy full access from all sides - our tonneau cover will not block access to your cargo area . Load from both sides or the back, depending on your needs. In summary, the load compartment cover 743 from CARRYBOY for your Ford Ranger double cab (Doublecab) from 2023+ is particularly suitable for simple use . The special feature of the load compartment cover is: easy opening .

Carryboy - load compartment cover lid SX for Ford Ranger Double Cab (2012+) Load compartment lid with gas spring - operation, angle of attack approx. 40° insensitive in robust use, thanks to the very stable GRP base material ideally suited for an exceptionally long service life, easy to repair LED interior light, manual control All around - seals lie on the loading sill and seal reliably Offer in white primer, also available in body color Save up to 15% on fuel with Carryboy lockable - two keys incl. complete closure of the load compartment with the cover possible, even without a tailgate lock Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The SX cargo area cover from CARRYBOY for the Ford Ranger double cab is a solid, functional cover made of unbreakable and stable GRP - glass fiber plastic. The rotary lock with cylinder and set of keys enables the entire Ranger cargo area to be locked securely. The high-quality, thickly laminated GRP material offers a multitude of advantages in daily use: In addition to high resistance to breakage and high stability, it is also very easy to repair when used later. This Ford Ranger accessory from CARRYBOY is the basis of every load compartment cover: simple, yet very attractive design, quick and easy installation, all-round protection of the load compartment from dust and water. A secure closure of the entire loading space should not be missing from the properties either! The offer is rounded off with an optional paint finish in the vehicle color - the cover can also be supplied with a white primer. The CARRYBOY flat cover - cover SX for the Ford Ranger double cab has side edges that are curved over the edge of the vehicle. This ensures a secure closure of the entire loading area. All-round seals lie on the loading edge of your vehicle and keep water and dust out of the loading area. Rain drains off the lid on the rim of your Ford Ranger double cab pickup. The cargo area of your Ford Ranger double cab can be brightly lit with the CARRYBOY lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as a further Ford Ranger accessory. The brake light in the driver's cab is always reliably visible! Be on the safe side with the CARRYBOY cargo area cover SX for the Ford Ranger double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer. Please note: This cover is designed for the Ranger XL , XLT (removable front protection grille). An assembly on Limited and Wildtrak is also possible, but then the brackets have to be dismantled. A brake light is not installed in the cab on the Limited and Wildtrak versions.

CARRYBOY - load compartment cover  Model SFB-Fullbox-TVD Fullbox - gives a stylish look can be moved with ease, thanks to gas springs. Save up to 15% on fuel with CARRYBOY The cover is insensitive in robust use ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses Offer in white primer, also available in body color lockable - two keys incl. Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included

Carryboy load compartment cover GfK with bracket R-795-FTD Ford Ranger double cab with roll bar / protection bar Individual design elements depending on the vehicle can be moved with ease, thanks to gas springs. Save up to 15% on fuel with CARRYBOY insensitive in daily use exceptionally long service life stable and easy to use Offer in white primer, also available in body color lockable - two keys incl. Locks the entire loading area with just one key, the tailgate cannot be opened Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included

Are you looking for a precisely fitting and well-designed cargo area cover? It should not only be functional, but also be a practical success? We at NOVISauto are happy to help you! Expand your double cab pickup truck Maxus T60/T90 2023+ with a high-quality NOVISauto cargo cover from Retrax. Benefit from our strong NOVISauto cargo cover model Retrax - ONEMX from Retrax for your Maxus T60/T90 double cab built in 2023+. The tonneau cover is specifically designed for your pickup truck and tailor-made for the Maxus. Unique, high-quality design in pickup style. It offers your pickup comfortable and high-quality protection. The load compartment cover is delivered with a mounting kit and installation instructions and you can optionally watch our assembly videos on YouTube. If you have any questions, you can contact us at any time. If you wish, we can take care of the professional installation of the load compartment cover. Our employees are technically skilled, professionally competent and practically experienced! Benefit from our strong Retrax load compartment cover model Retrax - ONEMX for your Maxus T60/T90 double cab 2023+. Your NOVISauto cargo cover at a glance: for Maxus T60/T90 Double Cab (Doublecab) built 2023+ NOVISauto cargo cover manufactured by RETRAX Material: Polycarbonate (LEXAN): narrow aluminum-reinforced slats without hinges lockable Operation: manual Special feature: Spiral track system for easy rolling up and down, without torsion spring, made from one piece and no seams particularly suitable for: Leisure open mobile particularly UV-resistant ultra-flat scratch-resistant Installation type: without drilling (for: loading area with distance to the rear wall or loading area with rubber plug) Surface finish: matt black, powder-coated Load capacity: 90 kg Approximate assembly time: 75 min Locking & closure: Locking: any position, two-point locking Laying water drain - Black matt [MX] Our recommendation for your Maxus T60/T90 double cab Our first-class NOVISauto cargo cover Retrax - ONEMX from Retrax for your Maxus T60/T90 2023+ double cab is suitable for every purpose! It is an ideal cover for leisure, for the protection and transport of everyday goods. Use the tonneau for leisure and business! We recommend a fixed cover or a roller blind type blind for primarily commercial use. We recommend that you take a look at our comparison tables for load area covers: https://www.novisauto.de/Downloads-Dokumente/ Best service from a single source - before and after the purchase Use our first-class service! Questions? Uncertainties? Contact us by email or phone! Look forward to detailed and customer-oriented advice . We work in the office AND warehouse every day. We have extensive experience over 16 years of practical performance. Look forward to technically skilled, professionally competent and practically experienced employees. Our unique spare parts (service) offers you spare parts several years after the product has been purchased! This means that your Maxus T60 / T90 double cab (Doublecab) built in 2023 is perfectly equipped with the Retrax - ONEMX load compartment cover. Use your load compartment cover for a lifetime and protect the environment! Load compartment covers from NOVISauto! Is long-term use and therefore sustainability important to you? No problem! The use of high-quality materials, raw materials and parts enables our covers to have a long lifespan and service life. It is precisely this lifelong use that enables us to save valuable resources - sustainability through service life! A strong T60/T90 load compartment cover model Retrax - ONEMX - Double Cab from NOVISauto The RE-60151 cargo cover for your Maxus T60/T90 is opened and closed manually . The Retrax - ONEMX cargo cover from NOVISauto for the Maxus T60/T90 can remain open while driving. There is nothing to stop you loading goods higher than the edge of the cargo area! The cargo cover can be locked using a two-point locking system . This protects your goods from theft, water and dirt. Several keys are included to make it easy to open and close your T60/T90 cargo cover. The cargo area cover is ultra-flat . Thanks to its flat design, the Retrax - ONEMX cover for your Maxus T60/T90 double cab (Doublecab) is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup and don't miss out on the advantages of cargo area covers! Installation without drilling (with: cargo area tray with a gap to the rear wall or loading area with rubber plugs) enables the cargo area cover to be assembled and disassembled quickly and cleanly without leaving any drill holes. We make no compromises when it comes to strength and safety. The Retrax - ONEMX load compartment cover from NOVISauto for your Maxus T60/T90 double cab (Doublecab) built in 2023+ is made of polycarbonate (LEXAN): narrow aluminum-reinforced slats without hinges . High resilience, robustness, stability and durability are the distinguishing features of polycarbonate (LEXAN) . The T60/T90 Retrax - ONEMX load compartment cover has the best basis for every purpose! Approximately 75 minutes are required to install the cover on your Maxus T60/T90. The durable Retrax - ONEMX load compartment cover from NOVISauto is particularly scratch-resistant . This allows for long-term use in top condition without major signs of wear. Equip your Maxus T60/T90 double cab (Doublecab) with a special, UV-resistant RETRAX Retrax - ONEMX load compartment cover. This increases the lifespan of the cover - it is protected from the sun and fading. The Maxus double cab (Doublecab) cover is lockable . Protection from prying eyes and thieves! Leisure : In summary, the Retrax - ONEMX load compartment cover from NOVISauto is particularly suitable for your Maxus T60/T90 double cab (Doublecab) 2023. Spiral track system for easy rolling up and down, no torsion spring, made from one piece and no seams : these are the special features of the load compartment cover. The Retrax - ONEMX load compartment cover can hold 90 kg . A water drain must be laid during assembly. The Retrax Retrax - ONEMX load compartment cover is delivered in matt black [MX] .

 NOVISauto trunk cover "Blackmax"  - Fuel-saving - pays for itself in a short time - guaranteed! The "BLACKMAX" load compartment cover is an elegant vinyl load compartment cover that can be rolled up to the cabin. The 4-way adjustable, glass-fibre reinforced snap fasteners along the "BLACKMAX" loading space tarpaulin - offer maximum possible freedom when loading and unloading as well as optimal protection of your transport goods. "BLACKMAX" is exceptionally convenient and easy to assemble - one person can easily assemble and disassemble this unique luggage compartment cover in just a few minutes and without tools.  Our exclusively developed "Speed-Klamp" system is safe and easy to use at all times. Normal driving is possible in the vertically locked position. Our load compartment cover model "BLACKMAX" is manufactured in all individual parts with the best materials and with the highest processing quality. The powder-coated frame and hard rubber corners offer the best protection against scratches and wear.  "BLACKMAX" is ideal for hot summer and cold winter months due to its UV and thermal resistance. Your advantages: Simple and quick assembly in a few minutes without tools maximum freedom of movement for storage and transport  with a rollable cover best quality in processing and material No drilling, no damage from assembly work (over-edge of tubs must be slightly modified) the platform flap can also be opened when the cover is closed including assembly kit and instructions Trust our service: even years later you will receive the right spare parts!

Are you looking for a tailor-made and well-designed cargo area cover? It should not only be functional, but also be a practical success? We at NOVISauto are happy to help you! Our NOVISauto cargo area cover model G2 from BAKFlip offers you many advantages over a bare cargo area and is therefore a useful addition to your double cab pickup Ford Ranger & VW Amarok 2023+. Benefit from our recommended NOVISauto cargo area cover model G2 from BAKFlip for your Ford Ranger & VW Amarok double cab built in 2023. Our cargo area cover for your Ford Ranger & VW Amarok double cab built from 2023 adapts seamlessly to your vehicle. High-quality design - keep your beloved pickup style and appearance and give your cargo area that certain something extra! Best protection against rain and dirt - that is one of the advantages of our cargo area cover. The assembly kit and installation instructions are included. You can also watch our assembly videos on YouTube. If you have any questions, you can contact us at any time. If you wish, we will be happy to professionally install the covers for you. Benefit from our strong BAKFlip load area cover model G2 for your Ranger & Amarok double cab built in 2023. Your NOVISauto cargo cover at a glance: for Ford Ranger & VW Amarok Double Cab (Doublecab) built 2023+ NOVISauto cargo cover manufactured by BAKFLIP Material: Aluminium (jacket) 3rd brake light always visible Operation: manual special feature: basic model particularly suitable for: easy application open mobile particularly UV-resistant flat Loading area fully accessible Mounting type: mounting rails and brackets Surface finish: structured: glossy black Frame: Aluminium: matt black Hinges: EPDM hinge housing Load capacity: 135 kg approximate assembly time: 45-60 min Locking & Closure: Snap closure with pull tab Laying water drain Our recommendation for your Ford Ranger & VW Amarok double cab Our first-class NOVISauto cargo cover G2 from BAKFlip for your Ford Ranger & VW Amarok 23+ double cab is suitable for every purpose! It is an ideal tonneau for simple use, for protecting and transporting everyday goods. Use the tonneau for leisure and business! We recommend a fixed cover or a roller blind type blind for primarily commercial use. We recommend that you take a look at our comparison tables for load area covers: https://www.novisauto.de/Downloads-Documents/ Best service - before and after purchase Use our first-class service! Questions? Uncertainties? You can reach us at any time by email or phone! We will be happy to advise you in detail and in a customer-oriented manner . Through our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical performance, we are technically adept, technically competent and practically experienced. We are the only ones in our industry to offer a spare parts service several years after the product has been purchased! This means that your Ford Ranger & VW Amarok double cab (Doublecab) built in 2023+ is perfectly equipped with the load compartment cover model G2. Protect your environment by using our products for a lifetime! Load compartment covers from NOVISauto! Are you worried about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our tonneaus to have a long lifespan and service life. Lifelong use saves valuable resources and leads to sustainability! A strong Ranger cargo cover model G2 - double cab from NOVISauto The BK-226342 load compartment cover for your Ford Ranger & VW Amarok is opened and closed manually . The NOVISauto G2 for the Ford Ranger can be driven open . This allows you to load large items without having to remove the cover! Your Ranger load compartment cover can be locked with a snap fastener + pull tab . This protects your items from theft, water and dirt. The Ranger load compartment cover is well protected by the integrated locking mechanism. The cover for your Ford Ranger can only be unlocked from the inside . The cargo area cover is flat . The flat design makes the G2 cover for your Ford Ranger & VW Amarok double cab particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup and don't miss out on the advantages of cargo area covers! Installation with fastening rails and clips allows the cargo area cover to be more stable. The fastening rails and clips ensure that the cargo area cover sits particularly securely. The shell of our G2 load compartment cover for your Ford Ranger & VW Amarok double cab (Doublecab) built in 2023 is made of aluminum . Aluminum is lightweight and robust . In addition, aluminum is very stable and durable . This makes it an excellent material for the Ranger G2 and is used as required. The third brake light is always visible on the G2 load compartment cover. It takes about 45-60 minutes to install the cover on your Ford Ranger & VW Amarok. The hinges used are EPDM hinge housings . Our BAKFLIP G2 load compartment cover for your Ford Ranger & VW Amarok double cab (Doublecab) offers you special UV resistance . This increases the lifespan of the cover - it is protected from the sun and fading. Enjoy full access from all sides - our load compartment cover does not block access to your load compartment . Load from both sides or the back, as required. In summary, the point " Easy to use " reflects the case for which the G2 cargo cover from NOVISauto is particularly suitable for your Ford Ranger & VW Amarok Double Cab 2023. Basic model : This is the special feature of the cargo cover. The G2 cargo cover can hold 135 kg . You must lay a water drain.

  FLEX is a "tight-to-fold" cover, the ultimate solution for your Ford Ranger pickup truck. With FLEX you drive safely on long stretches of motorway and off-road with the cover closed and open.  FLEX is easy to disassemble, requires no drilling during assembly, and sits flat and flush on the top edge of the cargo box. FLEX is the "tight-to-fold" cover that protects your luggage from wet and damp. It stays dry in the storage space -  and sure ! Each of the 3 folding elements is made of high-quality solid composite plastic, which is lighter, harder and more break-resistant than aluminium. In addition, the core is covered with an aluminum cover plate. Each FLEX cover is fitted with a profile system to which seals and drainage hoses are connected, so that rain and dirty water is drained off to the side from both the inside and the outside. All this makes FLEX one of the most popular and best-selling covers worldwide. 

Carryboy chassis body  Aluminum tray model the perfect service structure on your pickup chassis Standard version: powder coated steel brackets roll bar in front Floor made of non-slip aluminum profiles integrated dirt trap Aluminum rear light guard (optional) All aluminum construction flap safety relatively easy assembly nevertheless: we recommend  assembly by a body shop Mounting kit included Secured supply of spare parts  from the "Authorized Dealer" (Carryboy Germany). We prefer collection by our customers, but we are also happy to deliver as a kit, protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.

 Carryboy chassis body  Model CSV-Tradesman for Ford Ranger double cab - the perfect service structure for your pickup chassis  - Available in all body colors. Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - three LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - rear bumper made of high quality stainless steel - Rear lights protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day),   nevertheless: we recommend  assembly by a body shop - Mounting kit included Secured supply of spare parts from the "Authorized Dealer" (Carryboy Germany). In addition, if desired, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customer, but we also deliver protected  in wooden frame  at an attractive delivery price - please ask for the freight costs. Of course, assembly at our location is also possible. You provide us with your vehicle, or we will supply you with the fully assembled vehicle with CSV structure! - Please contact us, we will be happy to advise you.

 Carryboy chassis body  Model CSV-Tradesman for Ford Ranger double cab - the perfect service structure for your pickup chassis  - Available in all body colors. Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - three LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - rear bumper made of high quality stainless steel - Rear lights protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day),   nevertheless: we recommend  assembly by a body shop - Mounting kit included Secured supply of spare parts from the "Authorized Dealer" (Carryboy Germany). In addition, if desired, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customer, but we also deliver protected  in wooden frame  at an attractive delivery price - please ask for the freight costs. Of course, assembly at our location is also possible. You provide us with your vehicle, or we will supply you with the fully assembled vehicle with CSV structure! - Please contact us, we will be happy to advise you.