Carryboy Hardtop with hinged window SON-FTC

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

NOVISauto lashing clamps "CARGO CLEATS" - an ingeniously simple lashing system for your pickup loading box  -  installed in minutes ! the optimal alternative for backup  of your transported goods!  No drilling is required to attach the cleats anywhere on the top edge of the cargo box side walls. No damage to paint or sheet metal during installation and under load. The cleats are made of plastic-coated glass, so they are extremely durable and will not rust. Loads of up to around 200 kg are possible and can also be used for most of our luggage compartment covers. Additional CARGO CLEADS are required for larger loads:  always use more CARGO CLEATS to secure your cargo than necessary! - - Sold in pairs, information on attachment and application options, such as tips for knotting, for optimal loading is included. To note:  CARGO CLEATS cannot be used with load compartment tubs that are over the edge (overrail tubs) -  unless the tub is cut out at the relevant attachment points. CARGO CLEATS is not suitable for plastic-coated cargo boxes.    

NOVISauto - pre-compressed, permanently elastic joint sealing tape  for sealing the joint between the hard top or load compartment cover and the vehicle load box. Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover  glued on, previously trimmed a little at the ends.  Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps. A detailed assembly description is enclosed with the delivery.

NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene  

Equip your Ford Ranger extra cab (Spacecab), double cab or single cab (Singlecab) built in 2023+ with a CARRYBOY tailgate damper 111. Increase the usability of your pickup and increase comfort. With accessories from the Comfort & Ease of Use section. Ford Ranger accessories seamlessly adapt to your vehicle. Opt for a bespoke accessory that comes with a mounting kit and installation instructions. If you have any questions, you can contact us at any time. If you wish, we would be happy to professionally assemble the accessories for you. Take advantage of our strong CARRYBOY accessory model tailgate damper 111 from Carryboy for your Ford Ranger extra cab (Spacecab), double cab or single cab (single cab) built in 2023+. Your advantages summarized: for Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab), single cab (Singlecab) year of construction from 2023+ CARRYBOY accessories manufactured by CARRYBOY Accessories designed for comfort & ease of use - black Mounting type: screws approximate assembly time: 10 min special feature: easy opening and high compatibility particularly suitable for: convenient use and simple application Attaches to tailgate and side Storage space approx. 0.5 m³ Our recommendation for your Ford Ranger Extra Cab (Spacecab), Double Cab, Single Cab (Singlecab) Our first-class CARRYBOY accessory tailgate damper 111 from Carryboy for your Ford Ranger 2023+ extra cabin (Spacecab), double cabin or single cabin (Singlecab) is suitable for every purpose! It is an ideal accessory for convenient use and easy application. Use the accessories for leisure and business! Best service - before and after the purchase You can rely on our service! Uncertainties or questions? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Are you concerned about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our accessories to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production. More comfort and increased user-friendliness with CARRYBOY tailgate dampers 111 The accessory Carryboy tailgate damper 111 is delivered in black . The Carryboy CB-111-FT tailgate damper gas pressure spring is installed on the tailgate, on the side . The approximate installation time is 10 minutes on your Ford Ranger. Mounting with screws allows for better stability of the accessories. The accessory is particularly secure thanks to screws. The special features of the accessories are: easy opening and high compatibility . Convenient to use and easy to use : in summary, the CARRYBOY tailgate damper 111 accessory for your Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab) or single cab (Singlecab) from 2023+ is particularly suitable for this.

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Ford Ranger 2012+ for Ford Ranger 2012+ Double Cab / Extra Cab / Single Cab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate

Rüsten Sie Ihren Pickup Truck verschiedener Marken Doppelkabine, Einzelkabine oder Extrakabine Baujahr(e) 2016-24 mit einer hochwertigen Motorhaubenöffner 106 von CARRYBOY aus. Mehr Komfort. Bessere Bedienung. Ihr Pickup – noch benutzerfreundlicher. Mit Zubehör aus der Rubrik Komfort & Benutzerfreundlichkeit. Motorhaubenöffner 106 erhöht die Benutzerfreundlichkeit Ihres Fahrzeugs und integriert sich reibungslos an Ihre Bedürfnisse. Im Lieferumfang enthalten sind ein maßgeschneidertes Montagekit und eine detaillierte Einbauanleitung. Zusätzlich unterstützen unsere anschaulichen YouTube-Videos eine einfache und reibungslose Installation. Und wenn’s doch mal hakt – unser erfahrenes Team ist jederzeit für Sie erreichbar. Auf Wunsch übernehmen unsere technisch versierten und erfahrenen Fachkräfte die fachgerechte Montage Ihres Zubehörs. Somit ist unser Zubehör Modell Motorhaubenöffner 106 das stärkste Model für Ihren Pickup Doppelkabine, Einzelkabine oder Extrakabine Baujahr 2016 - 2024. Unsere CARRYBOY Zubehör - Auf einen Blick - die gesamte Ausstattung: Kompatibilität: Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara, Toyota Hilux Doppelkabine (Doublecab), Einzelkabine (Singlecab), Extrakabine/1, 5-Kabine (Kingcab) Baujahr 2016 - 2024 Qualitätsprodukt: CARRYBOY Zubehör Anwendungsfall: Zubehör geeignet für Komfort & Benutzerfreundlichkeit Montageart: schrauben ungefähre Montagezeit: 15 min besonderes Merkmal: einfaches Öffnen und extrem kurze Einbauzeit besonderes geeignet für: bequeme Nutzung, einfache Anwendung und täglicher Gebrauch Befestigungsort: Motorhaube** Stauraum: ca. 0,5 m³ Unser Service an Sie - vor dem Kauf, als auch nach dem Kauf Unsere Dienste sind auf Ihre Anforderungen zugeschnitten. Ob vor oder nach dem Kauf – unser umfassender Service bietet Ihnen die Unterstützung, die Sie benötigen. Bei Fragen oder Zweifeln stehen wir Ihnen telefonisch oder via E-Mail zur Verfügung. Unser qualifiziertes Team steht Ihnen mit fundiertem Fachwissen, einer freundlichen Haltung und einem Service, der speziell auf Ihre Anforderungen abgestimmt ist, beratend zur Seite. Dank unserer mehr als 16-jährigen Praxiserfahrung gewährleisten wir Zuverlässigkeit. Unser fachkundiges Personal bietet Ihnen dank seiner umfassenden Expertise und langjährigen aktiv in der Branche erworbenen Erfahrungen stets erstklassigen Service. Praktisch. Durchdacht. Langlebig. Eine nachhaltige Produktgestaltung ist uns wichtig. Die Verwendung von hochwertigen Materialien, Rohstoffen und Teilen ermöglicht eine lange Lebens- und Nutzungsdauer unseres Zubehörs. Nachhaltigkeit wird durch eine lebenslange Nutzung und damit das Sparen von Ressourcen zur Neuherstellung erreicht. Mehr Komfort und erhöhte Benutzerfreundlichkeit durch CARRYBOY Motorhaubenöffner 106 Die Montage des Carryboy Motorhaubenöffner CB-106 erfolgt auf der Motorhaube. Die ungefähre Montagezeit beträgt 15 min auf Ihren Pickup Truck. Eine Montage mit schrauben ermöglicht eine bessere Standfestigkeit des Zubehörs. Durch schrauben sitzt das Zubehör besonders sicher an. Einfaches Öffnen und extrem kurze Einbauzeit: Das sind die besonderen Merkmale des Zubehörs. Zusammenfassend spiegeln die Punkte "Bequeme Nutzung, einfache Anwendung und täglicher Gebrauch" den Fall wieder, für welcher das Zubehör Motorhaubenöffner 106 von CARRYBOY für Ihren Pickup Truck Doppelkabine (Doublecab), Einzelkabine (Singlecab), Extrakabine/1 oder 5-Kabine (Kingcab) 2016 - 2024 besonders geeignet ist.

NOVISauto – B-Light / B-Light  is the ultra-bright lighting for your pick-up loading area made of 8 brightly lit LED units, each with 6 LED bulbs. B-Light fits all pickup trucks and models - B-Light brightly illuminates the entire cargo area of your pickup - There is only one switch for the whole light system. B light is suitable for all pickups with any cargo area covers or hardtop.  To protect against slipping loads, B-Light should be mounted under the U-rail on the side.

NOVISauto - edge protection for the pickup tailgate of your Ford Ranger from year of construction 2012+ Effectively and inexpensively protect the scratch-prone upper edge of the tailgate of your 2010-2020 Ford Ranger! The NOVISAuto protective strip for the Ford Ranger tailgate offers long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in loading space liner without edge protection or if the loading space is protected with a coating - because the edges of the loading area are still unprotected with both systems! The protective cap / rubbing strip for the Ford Ranger tailgate was developed for lasting protection against scratches, dents and dents. A close fit with smooth machined edges and durable plastic material make our Ford Ranger Edge Cover Moldings an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.

Saddlebag -  Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away  in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.   

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

NOVISauto - bed mat model BedMat in universal size for all common and non-common pickup models (also for special editions, extended vehicles) The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area. The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush. The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping. The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas. It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery. Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ). universally applicable for all models Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.  

NOVISauto – SwingCase for the Ford Ranger 2012+ / 2019+ pickup The ultra-practical box for tools, sporting goods and lots of small parts! You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing"  is more needed! NOVISauto, the leader in selling popular Ford Ranger accessories, builds these multi-purpose storage boxes out of high-impact ABS hard plastic for your convenience - strong enough for a long Ranger pickup truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Ford Ranger in all loading lengths. - The purchase of two SwingCases for both sides of your Ford Ranger platform wall is the best choice - space-saving, absolutely tight and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts!  SwingCase can be parked lying down or standing as usual. On the Ford Ranger 2012+, you can fix the SwingCase tool box on the side between the platform door and the wheel housing to save space. SwingCase for your Ford Ranger truck on the passenger side can be swung out and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. The tool box (tool box) and storage box is an essential Ford Ranger accessory for every tradesman or hobby - do-it-yourselfers. Suitable for all Ford Ranger models (XL, XLT, Limited, Wildtrak, Raptor). The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. For Ford Ranger pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.

Cargo area liner for Ford Ranger Extra Cab 2012+ / 2019+ Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Optimum utilization of the loading area (less clumsy than the original Ranger tub - behind the tailgate directly on the side panel of the vehicle, therefore the maximum loading width is used) including upper edge protection of the tailgate Only suitable for vehicles without lateral rail lashing system, cut-outs for lashing hooks are available Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects the paintwork at low cost Made in the USA - no re-import from the Far East! Accesories Tailgate protection with edge protection included assembly description with the necessary mounting accessories  

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material:   Materials from the outside:   Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays)   Material from inside:   190 g/sqm rip-stop polyester with PU 2000mm   Bottom material:          210 Denier Oxford Nylon with PU 2000mm Interior:   rust-free aluminum struts ensure structure and comfortable lying   6 cm foam mattress can be removed and cleaned    6 large windows with insect screens   2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size:   Unfolded & erected:           1,340 x 2,165 x 1,343mm   folded:             1,340 x 2,165 x 300mm   Weight:                               56 kg (together with ladder)    

Novisauto Pathfinder-1 roof tent The Novisauto roof tent for every pickup or at least mid-range SUV is one of the first innovative electrically controllable roof tents. You can straighten it up and down with a simple push of a button, alternatively you can also do it by hand. The tent is set up on the vehicle using clamps on cross members. Comfort : Self-erecting by remote control within 60 seconds Power supply via socket of the vehicle (3m cable) spacious interior with enough space for 2 people Reliable protection against wind and rain with extendable telescopic aluminum ladder - loadable up to 150kg with 6cm foam mattress. The cotton cover can be removed and washed. 2 extra hanging pockets for storing shoes, for example double fly screens in front of the windows and the entrance Tent size :   unfolded & erected (inside):      1,200(W) x 2,000(L) x 1,100(H) mm   Weight:                                       56 kg (together with ladder)   Material :   Material outside:   Oxford polyester with silver coating and UPF50+ *   Materials inside:   190 g/sqm ripstop polyester with 2000 mm water column   Bottom material:   210 Denier Oxford Nylon with 2000mm hydrostatic head Interior :   Stainless steel struts provide structure.   6 cm foam mattress can be removed with cover   6 windows with insect screen and privacy screen   2 additional shoe bags  

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

The basic version of the Huckepack camping pickup structure combines everything you need to experience a short adventure. Drive to the North Sea for the weekend and listen to the sound of the waves. How about a 4 to 5 day short trip to the Black Forest and enjoy the peace and quiet while the forest and nature embrace you?  Our motto "Freedom on wheels" is our motto. Enjoy the opportunity to go anywhere. Even the basic version is generously equipped and covers all your basic needs so that nothing stands in the way of your trip. The structure can be packed and unpacked quickly and easily - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!

Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you! Expand your extra cab pickup truck from 2023+ with a high-quality CARRYBOY cargo area cover from Carryboy. Benefit from our recommended CARRYBOY load compartment cover model 743 from Carryboy for your Ford Ranger extra cabin from year of construction 2023+. The Ford Ranger tonneau cover seamlessly fits your vehicle. Combine high-quality design with the best protection for your cargo area, without having to forego the classic, beloved style of a pickup truck! The load compartment cover offers your pickup high-quality and convenient protection. Opt for a tailor-made tonneau cover that comes with a fitting kit and installation instructions. If you have any questions, you can contact us at any time. Let our technically experienced, professionally competent and practically experienced employees install your load compartment cover on request! Benefit from our strong Carryboy load compartment cover model 743 for your Ford Ranger from 2023+. The entire equipment at a glance: for Ford Ranger Extra Cab year of construction from 2023 CARRYBOY trunk cover manufactured by CARRYBOY Material: Vinyl: Black Operation: manual special feature: easy to open particularly suitable for: simple application mobile when open overlying Loading area fully accessible Mounting type: rails and drilling Surface finish: matte black Tension control: automatic approximate assembly time: 30-45 min Latch & Closure: Velcro and spring clip closure Our recommendation for your Ford Ranger Extra Cab Our first-class CARRYBOY cargo area cover 743 from Carryboy for your Ford Ranger from 2023 extra cabin is suitable for every purpose! It is an ideal tonneau for easy use, protecting and transporting everyday goods. Use the cover for leisure and business! We recommend a fixed tonneau or roller blind type blind for primarily commercial use. We recommend checking out our tonneau cover comparison charts : https://www.novisauto.de/Downloads-Documents/ Our service to you - before and after the purchase Rely on our service! Questions? uncertainties? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Our unique spare parts (service) offers you spare parts for several years after product purchase! Your Ford Ranger extra cab from year of construction 2023 is therefore optimally equipped with the load compartment cover model 743. Protect your environment by using our products for life! Cargo area covers from CARRYBOY! Is sustainability and long-term use of the product important to you? No problem! High-quality materials, parts and raw materials enable our tonneau to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production. High-quality Ford Ranger load compartment cover model 743 - extra cabin from CARRYBOY The CB-743-FRD tonneau cover for your Ford Ranger opens and closes manually . Thanks to the outstanding advantage of an open, mobile load compartment cover 743 from CARRYBOY for the Ford Ranger, you no longer have to think about whether something fits in the load compartment or not. Just charge, leave the cover open, no problem! The luggage compartment cover can be locked with a spring clamp . Your ranger is thus safely protected from thieves and prying eyes. The Navara load compartment cover is well protected thanks to the integrated locking mechanism. The cover for your Ford Ranger can also be unlocked from the outside . The load compartment cover is on top . As a result, the 743 cover nestles up against the shape of the flatbed and greatly enhances the design, appearance and visual value of your Ford Ranger extra cab from 2023+. Mounting with rails and drilling allows for better stability of the load compartment cover. The load compartment cover is particularly secure thanks to rails and drilling. The 743 cargo area cover from CARRYBOY is made of vinyl: black for your  Ford Ranger  Extra cabin year of construction from 2023+. For simple, everyday use in the private sector, vinyl is suitable for your Ranger due to its favorable price-performance ratio. Benefit from longevity, (UV) resistance and easy handling. It takes approximately 30-45 minutes to fit the cover on your Ford Ranger. The cover has an automatic tension control , so the product always stays tensioned. Enjoy full access from all sides - our tonneau cover will not block access to your cargo area . Load from both sides or the back, depending on your needs. In summary, the CARRYBOY load compartment cover 743 for your Ford Ranger extra cab from 2023+ is particularly suitable for Easy to use . The special feature of the load compartment cover is: easy opening .

Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener for Ford Ranger Extra Cab 2012+ Cargo area tarpaulin - plastic-laminated, waterproof and robust Elegant knobbed finish on the surface Anodized aluminum frame with integrated tarpaulin Fixation of the rolled up tarpaulin on three belt buckles All-round seals against water ingress into the cargo area Tarpaulin can be opened from the outside weatherproof and moisture resistant Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use Can be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The CARRYBOY vinyl tarpaulin cargo area cover for the Ford Ranger Extra Cab 2012+ combines ease of use with an unbeatable price-performance ratio. The cargo area tarpaulin for the Ford Ranger Extra Cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Ford Ranger Extracab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality lightning fasteners reliably secure the tarpaulin for the loading area of the Ford Ranger 2012+, so that driving with the tarpaulin open is also possible. The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the Ford Ranger extra cab pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your Ford Ranger loading area. All-round seals reliably keep the elements away from the cargo area. The load compartment cover 743 of the type "tarpaulin for rolling up with Velcro" has been specially developed for installation with an over-edge load compartment tub. For Ford Ranger vehicles without a load compartment liner with edge protection, we recommend a consultation in advance. Installation without drilling is only possible with a trough of the type mentioned. Please note that the Carryboy vinyl tarpaulin soft lid can only be installed on Ford Ranger extra cab vehicles without a front protection grille or roll bar. If you have one of these accessories, it can be easily removed with just a few screws. Installation on the Ford Ranger Extracab without tub is also possible. For professional installation in a specialist workshop or on your own, we recommend using blind rivet nuts. Detailed assembly instructions are included.

Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener for Ford Ranger Extra Cab 2002-2011 Cargo area tarpaulin - plastic-laminated, waterproof and robust Elegant knobbed finish on the surface Anodized aluminum frame with integrated tarpaulin Fixation of the rolled up tarpaulin on three belt buckles All-round seals against water ingress into the cargo area Tarpaulin can be opened from the outside weatherproof and moisture resistant Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use Can be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The CARRYBOY vinyl tarpaulin type load compartment cover for the Ford Ranger extra cab 2002-2011 combines ease of use with an unbeatable price-performance ratio. The cargo area tarpaulin for the Ford Ranger Extra Cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Ford Ranger Extracab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality lightning fasteners reliably secure the tarpaulin for the loading area of the Ford Ranger 02-11, so that it is also possible to drive with the tarpaulin open. The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the Ford Ranger extra cab pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your Ford Ranger loading area. All-round seals reliably keep the elements away from the cargo area. The load compartment cover 743 of the type "tarpaulin for rolling up with Velcro" has been specially developed for installation with an over-edge load compartment tub. For Ford Ranger vehicles without a load compartment liner with edge protection, we recommend a consultation in advance. Installation without drilling is only possible with a trough of the type mentioned. Please note that the Carryboy vinyl tarpaulin soft lid can only be installed on Ford Ranger extra cab vehicles without a front protection grille or roll bar. If you have one of these accessories, it can be easily removed with just a few screws. Installation on the Ford Ranger Extracab without tub is also possible. For professional installation in a specialist workshop or on your own, we recommend using blind rivet nuts. Detailed assembly instructions are included.

  FLEX is a "tight-to-fold" cover, the optimal solution for your pickup truck. For the Ford Ranger Extracabin / Extracab With FLEX you drive safely on long stretches of motorway and off-road with the cover closed and open.  FLEX is easy to disassemble, requires no drilling during assembly, and sits flat and flush on the top edge of the cargo box. FLEX is the "tight-to-fold" cover that protects your luggage from wet and damp. It stays dry in the storage space -  and sure ! Each of the 3 folding elements is made of high-quality solid composite plastic, which is lighter, harder and more break-resistant than aluminium. Each of the panels consists of a high-density foam core with an aluminum cover. Each FLEX cover is fitted with a profile system to which seals and drainage hoses are connected, so that rain and dirty water is drained off to the side from both the inside and the outside. The snap-lock system on each foldable element ensures that the cover is held securely and securely and protects the loading space from unauthorized access. The FLEX load compartment cover for folding can be securely locked via the tailgate. The cover can be closed, opened 2/3 or completely open. In any case, you save up to 15% on fuel with the cover installed. A "Quick-Release-System" allows full flexibility for the use of the loading area after the initial installation. If unexpectedly large objects are to be transported, the entire cover can be dismantled in no time at all - and reassembled. It is also ideally suited for use with a living room. All this makes FLEX one of the most popular and best-selling covers worldwide.  You can also rely on NOVISAUTO's secure supply of spare parts

NOVISauto cargo area cover tarpaulin for folding TRIFECTA for the Ford Ranger extra cab from year of construction 2012: Vinyl tarpaulin "Trifecta" for folding Precise processing and selected, resilient materials Thick, high-quality "Heavy Duty" tarpaulin in black with imitation leather embossing Seams secured several times also withstand permanent loads Anodized and black coated aluminum frame Installation without tools within 5 minutes Easy to use with a spring lock Quality seals all around Cover rests on the sill - the seals ensure reliable protection against water and dust Double axle - hinges for commercial use - are not subject to the weather as they are installed under the tarpaulin and protected with seals Lockable with tailgate lock Can be driven open and locked with a convenient lightning bolt buckle Please note: Only suitable for Ford Ranger extra cab without roll bar (Wildtrak / Limited). The front protective grille must be removed before installing the cover (4 screws). Can be combined with our "Sportbar 2.0" roll bar. Trust our service: even years later you will receive the right spare parts!

Carryboy chassis body  Aluminum tray model the perfect service structure on your pickup chassis Standard version: powder coated steel brackets roll bar in front Floor made of non-slip aluminum profiles integrated dirt trap Aluminum rear light guard (optional) All aluminum construction flap safety relatively easy assembly nevertheless: we recommend  assembly by a body shop Mounting kit included Secured supply of spare parts  from the "Authorized Dealer" (Carryboy Germany). We prefer collection by our customers, but we are also happy to deliver as a kit, protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.

 Carryboy chassis body  CSV Tradesman model  - the perfect service structure on your pickup chassis  - Available in all body colors. For Ford Ranger extra cab from year of construction 2012+ (also 2016+ / 2020+) Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - three LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - Rear steps made of high-quality stainless steel - Rear lights with all the necessary functions (including fog lights) protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day),  nonetheless: we recommend  assembly by a body shop - Mounting kit included Secured supply of spare parts from the "Authorized Dealer" (Carryboy Germany). In addition, if desired, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customer, but we also deliver protected  in wooden frame  at an attractive delivery price - please ask for the freight costs. Of course, assembly at our location is also possible. You provide us with your vehicle, or we will supply you with the fully assembled vehicle with CSV structure! - Please contact us, we will be happy to advise you.

 Carryboy chassis body  CSV Tradesman model  - the perfect service structure on your pickup chassis  - Available in all body colors. For Ford Ranger extra cab from year of construction 2012+ (also 2016+ / 2020+) Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - three LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - Rear steps made of high-quality stainless steel - Rear lights with all the necessary functions (including fog lights) protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day),  nonetheless: we recommend  assembly by a body shop - Mounting kit included Secured supply of spare parts from the "Authorized Dealer" (Carryboy Germany). In addition, if desired, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customer, but we also deliver protected  in wooden frame  at an attractive delivery price - please ask for the freight costs. Of course, assembly at our location is also possible. You provide us with your vehicle, or we will supply you with the fully assembled vehicle with CSV structure! - Please contact us, we will be happy to advise you.