Carryboy Hardtop without side windows SR5oS-NP3D

NOVISauto – B-Light / B-Light  is the ultra-bright lighting for your pick-up loading area made of 8 brightly lit LED units, each with 6 LED bulbs. B-Light fits all pickup trucks and models - B-Light brightly illuminates the entire cargo area of your pickup - There is only one switch for the whole light system. B light is suitable for all pickups with any cargo area covers or hardtop.  To protect against slipping loads, B-Light should be mounted under the U-rail on the side.

NOVISAUTO pickup tailgate seal MAXSEAL for all common EU and US pickup vehicles: NOVISauto tailgate seal "MAX SEAL" keeps your pickup loading area free from dust, rain and snow - this EPDM sealing tape (ethylene propylene diene)  is a foil-shaped, synthetic rubber, a material according to DIN EN 13956 that is often used for roof and facade seals,  used for pond sealing.  The tailgate seal MAX - SEAL is up to 500% stretchable, permanently elastic (even at temperatures between -40 degrees Celsius and +120 degrees) and has a life expectancy of decades. The MAX - SEAL tailgate seals are resistant to aging and ozone without additional surface protection. They are UV and IR stable and resistant to a variety of chemical media.  (Source: from Wikipedia). Max Seal is easy to install in minutes using a do-it-yourself method - simply cut and glue the ends! - The band is long enough and suitable for  all pickup trucks with a tonneau cover or hard top. Equip your pickup with a tailgate seal from CARRYBOY / NOVISAUTO. This means that water and dust no longer have any chance of entering the pickup cargo area. The easy, quick and convenient way to seal your tailgate yourself.

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

Carryboy - trunk cover lid model SX-NFD for Nissan Navara D40 double cab short bed (151cm) Load compartment lid with gas spring - operation, angle of attack approx. 40° insensitive in robust use, thanks to the very stable GRP base material ideally suited for an exceptionally long service life, easy to repair LED interior light, manual control All around - seals lie on the loading sill and seal reliably Offer in white primer, also available in body color Save up to 15% on fuel with Carryboy lockable - two keys incl. complete closure of the load compartment with the cover possible, even without a tailgate lock Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The SX cargo area cover from CARRYBOY for the Nissan Navara D40 double cab is a solid, functional cover made of unbreakable and stable GRP - glass fiber plastic. The rotary lock with cylinder and set of keys enables the entire D40 Pickup load compartment to be locked securely. The high-quality, thickly laminated GRP material offers a multitude of advantages in daily use: In addition to high resistance to breakage and high stability, it is also very easy to repair when used later. This Nissan Navara D40 accessory from CARRYBOY is the basis of every luggage compartment cover: simple, yet very attractive design, quick and easy installation, all-round protection of the luggage compartment from dust and water. A secure closure of the entire loading space should not be missing from the properties either! The offer is rounded off with an optional paint finish in the vehicle color - the cover can also be supplied with a white primer. The flat cover - cover SX for the D40 double cab has side edges that are curved over the edge of the vehicle. This ensures a secure closure of the entire loading area. All-round seals lie on the loading edge of your vehicle and keep water and dust out of the loading area. Rain drains off the lid on the edge of your Nissan Navara D40 double cab pickup. The cargo area of your Nissan Navara D40 short bed double cab can be equipped with the  CARRYBOY lid will be brightly lit! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Nissan D40 accessory. The brake light in the driver's cab is always reliably visible! Be on the safe side with the CARRYBOY cargo area cover SX for the Nissan Navara D40 double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.

Are you looking for a tailor-made and well-designed cargo area cover? It should not only be functional, but also be a practical success? We at NOVISauto are happy to help you! Enrich the appearance of your JAC 8 double cab pickup with a first-class cargo cover from Extang by RealTrucke. The high-quality NOVISauto cargo cover model Trifecta is the ideal addition to your JAC 8 double cab pickup from 2023+. Our cargo cover for your JAC 8 double cab (Doublecab) from 2023 fits seamlessly into your vehicle. High-quality design - keep your beloved pickup style and appearance and give your cargo space that little something extra! It offers your pickup comfortable and high-quality protection. The load compartment cover is delivered with an assembly kit and installation instructions and if required you can watch our assembly videos on YouTube. If you have any questions you can contact us at any time. We can take care of the professional installation of the load compartment cover on request. Our employees are technically skilled, professionally competent and practically experienced ! Benefit from our strong Extang by RealTruck load compartment cover model Trifecta for your 8 double cab built from 2023+. At a glance - the entire equipment: for JAC 8 Double Cab (Doublecab) built from 2023+ NOVISauto cargo cover manufactured by EXTANG BY REALTRUCK Material: Vinyl (black - industrial quality leather grain) Operation: manual special feature: extremely short installation time, foldable and versatile particularly suitable for: mobile home open and mobile particularly UV-resistant flat loading area fully accessible Mounting type: clamps, no drilling can only be unlocked from the inside Surface finish: Vinyl: matt shimmer Frame: Aluminum frame all around approximate assembly time: 5 min Locking & closure: 2-handle unlocking from inside Our recommendation for your JAC 8 Double Cab Our first-class NOVISauto Trifecta cargo cover from Extang by RealTruck for your JAC 8 from 2023+ double cab is suitable for every purpose! It is an ideal cover for a living cabin, for the protection and transport of everyday goods. Use the cover for leisure and business! We recommend a fixed cover or a roller blind type blind for primarily commercial use. We recommend that you take a look at our comparison tables for load space covers: https://www.novisauto.de/Downloads-Documents/ Best service from a single source - before and after the purchase Rely on our service! Questions? Uncertainties? Contact us by email or phone! We will be happy to advise you in detail and in a customer-oriented manner . We work in the office AND warehouse every day. We have extensive experience over 16 years of practical performance. Look forward to technically skilled, professionally competent and practically experienced employees. Our unique spare parts (service) offers you spare parts several years after the product has been purchased! Your JAC 8 double cab (Doublecab) built from 2023+ is perfectly equipped with our Trifecta load compartment cover. Use your load compartment cover for a lifetime and protect the environment! Load compartment covers from NOVISauto! Are you worried about sustainability or long-term use? No problem! The long lifespan and service life of our cover is made possible by the use of high-quality parts, raw materials and materials. It is precisely this lifelong use that enables us to save valuable resources - sustainability through service life! A strong JAC 8 load compartment cover model Trifecta - double cab from NOVISauto The Trifecta-JAC load compartment cover for your JAC 8 is opened and closed manually . The NOVISauto Trifecta for the JAC 8 can be driven open . This allows you to load large items without having to remove the cover! The load compartment cover can only be opened from the inside using a 2-handle release . This protects your items from theft, water and dirt. The 8 load compartment cover is well protected thanks to the integrated lock. The cover for your JAC 8 can only be unlocked from the inside . The cargo cover is flat . The flat design makes the Trifecta cover for your JAC 8 double cab particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup and don't miss out on the advantages of cargo covers! Clamping without drilling enables the cargo cover to be installed and removed quickly and cleanly without leaving any holes. We make no compromises when it comes to strength and safety. The shell of our Trifecta load compartment cover for your JAC 8 double cab (Doublecab) built from 2023+ is made of vinyl . Vinyl is characterized by durability, (UV) resistance and easy handling. In addition, vinyl has a good price-performance ratio and is a cheaper option for your 8. It is well suited for simple, daily use in private. It takes about 5 minutes to install the cover on your JAC 8. The EXTANG BY REALTRUCK Trifecta load compartment cover for your JAC 8 double cab is particularly UV-resistant . This increases the lifespan of the cover - it is protected from the sun and fading. Our load compartment cover does not block access to your load compartment. Enjoy full access from all sides. Load from the rear or from both sides, as required. The load compartment cover can only be unlocked from the inside . In summary, the Trifecta load compartment cover from NOVISauto is particularly suitable for your JAC 8 double cab (Doublecab) from 2023+. Extremely short installation time, foldable and versatile : these are the special features of the load compartment cover.

Are you looking for a tailor-made and well-designed cargo area cover? It should not only be functional, but also be a practical success? We at NOVISauto are happy to help you! Enrich the appearance of your JAC double cab pickup with a first-class cargo cover from Truxedo. The high-quality NOVISauto cargo cover model Lopro is the ideal addition to your JAC 2010-20 double cab pickup. The tonneau cover is specifically designed for your pickup truck and tailor-made for the JAC. High-quality design - keep your beloved pickup style and appearance and give your cargo space that little something extra! It offers your pickup comfortable and high-quality protection. The cargo cover is delivered with a mounting kit and installation instructions and you can optionally watch our assembly videos on YouTube. If you have any questions, you can contact us at any time. Have your cargo cover installed by our technically skilled, professionally competent and practically experienced employees on request! Benefit from our strong Truxedo cargo cover model Lopro for your JAC double cab built in 2024. The advantages of the load compartment cover at a glance: for JAC Doublecab built in 2024 NOVISauto cargo cover manufactured by TRUXEDO Material: Vinyl (black - industrial quality leather grain) Operation: manual special feature: flat cover at the level of the loading area and high-quality woven fabric open and mobile particularly UV-resistant flat, mounted on inner edge Mounting type: clamps, no drilling can only be unlocked from the inside Surface finish: Vinyl: matt shimmer Frame: Side rails approximate assembly time: 30 min Locking & Closure: Velcro Our recommendation for your JAC Double Cab Our first-class NOVISauto Lopro cargo cover from Truxedo for your JAC 2024 double cab is suitable for every purpose! It is an ideal cover for protecting and transporting everyday goods. Use the tonneau for leisure and business! We recommend a fixed cover or a roller blind type blind for primarily commercial use. We recommend that you take a look at our comparison tables for load space covers: https://www.novisauto.de/Downloads-Documents/ Our service to you - before and after the purchase Rely on our service! Any uncertainties or questions? Contact us by email or phone! We will be happy to advise you in detail and in a customer-oriented manner . Through our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical performance, we are technically adept, professionally competent and practically experienced. Our spare parts service, which is unique in the industry, offers you spare parts several years after you have purchased the product! Our Lopro load compartment cover is the perfect addition to your JAC double cab (Doublecab) built in 2024. Protect your environment by using our products for a lifetime! Load compartment covers from NOVISauto! Is sustainability and long-term use of the product important to you? No problem! The long life and service life of our tonneau is made possible by the use of high-quality parts, raw materials and materials. Lifelong use saves valuable resources and leads to sustainability! High-quality JAC cargo cover model Lopro - double cab from NOVISauto The cargo cover for your JAC is opened and closed manually . Thanks to the outstanding advantage of an open, mobile Lopro cargo cover from NOVISauto for the JAC, you no longer have to think about whether something will fit in the cargo area or not. Simply load, leave the cover open, no problem! Your JAC cargo cover can be attached with Velcro . This protects your goods from theft, water and dirt. The JAC cargo cover is well protected thanks to the integrated lock. The cover for your JAC can also be unlocked from the outside . The cargo cover is mounted on the inner edge, flat . Thanks to its flat design, the Lopro cover for your JAC double cab is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup and don't miss out on the advantages of cargo covers! Clamping without drilling enables the cargo cover to be installed and removed quickly and cleanly without leaving any holes. We make no compromises when it comes to strength and safety. The shell of our Lopro load compartment cover for your JAC double cab (Doublecab) built in 2024 is made of vinyl . For simple, daily use in the private sector, vinyl is suitable for your JAC due to its good price-performance ratio. Benefit from durability, (UV) resistance and easy handling. The approximate installation time is 30 minutes on your JAC. Equip your JAC double cab with a special, UV-resistant TRUXEDO Lopro cargo cover. This increases the lifespan of the cover - it is protected from the sun and fading. The cargo cover can only be unlocked from the inside . Flat cover at the level of the loading area and high-quality woven fabric : these are the special features of the loading area cover.

Are you looking for a tailor-made and well-designed cargo area cover? It should not only be functional, but also be a practical success? We at NOVISauto are happy to help you! The high-quality NOVISauto cargo cover model Retrax - ONEMX from Retrax by RealTrucke is the perfect extension for your double cab pickup DFM Rich 6 2022+. The high-quality NOVISauto cargo cover model Retrax - ONEMX is the ideal addition for your double cab pickup DFM 6 from 2020+. Our cargo cover for your DFM Rich 6 double cab (Doublecab) from model year 2020 adapts seamlessly to your vehicle. Combine high-quality design with the best protection for your cargo area without having to forego the classic, beloved style of a pickup! It offers your pickup comfortable and high-quality protection. The cargo cover is delivered with an assembly kit and installation instructions and you can also watch our assembly videos on YouTube. If you have any questions, you can contact us at any time. We can take care of the professional installation of the cargo cover on request. Our employees are technically skilled, professionally competent and practically experienced ! Benefit from our strong Retrax by RealTruck cargo cover model Retrax - ONEMX for your 6 double cab built from 2020+. Your NOVISauto cargo cover at a glance: for DFM Rich 6 Double Cab (Doublecab) built from 2020+ NOVISauto cargo cover manufactured by RETRAX BY REALTRUCK lockable Operation: manual special feature: spiral track system for easy rolling up and down, without torsion spring, stable 2 and 5 cm double-wall aluminum slats particularly suitable for: Load: cross beams, unique load capacity and extreme stress open and mobile particularly UV-resistant increased scratch-resistant Installation type: without drilling (for: loading area with distance to the rear wall or loading area with rubber plug) Surface finish: matt black and powder-coated Load capacity: 220 kg, cross beam: additional load 1 approximate assembly time: 75 min Locking & Closure: Locking: any position, two-point locking laying water drain Our recommendation for your DFM Rich 6 Double Cab Our first-class NOVISauto Retrax - ONEMX cargo cover from Retrax by RealTruck for your DFM Rich 6 from 2020+ double cab is suitable for every purpose! It is an ideal tonneau for loads: crossbars, unique load capacity and extreme stress, for the protection and transport of everyday goods. Use the cover for leisure and business! We recommend a fixed cover or a roller blind type blind for primarily commercial use. We recommend that you take a look at our comparison tables for load space covers: https://www.novisauto.de/Downloads-Documents/ Best service from a single source - before and after the purchase You can rely on our service! Questions or uncertainties? Ask us by email or phone! Look forward to detailed and customer-oriented advice . Through our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical performance, we are technically adept, professionally competent and practically experienced. Our unique spare parts (service) offers you spare parts several years after the product has been purchased! Your DFM Rich 6 double cab (Doublecab) built from 2020+ is perfectly equipped with our Retrax - ONEMX load compartment cover. Use your load compartment cover for a lifetime and protect the environment! Load compartment covers from NOVISauto! Is sustainability and long-term use of the product important to you? No problem! The use of high-quality materials, raw materials and parts enables our covers to have a long lifespan and service life. Lifelong use saves valuable resources and leads to sustainability! Quality cargo cover model Retrax - ONEMX for your DFM Rich 6 - Double Cab from NOVISauto The REDFMD22 load compartment cover for your DFM Rich 6 is opened and closed manually . The Retrax - ONEMX load compartment cover from NOVISauto for the DFM Rich 6 can remain open while driving. There is nothing to stop you loading goods higher than the edge of the load compartment! The load compartment cover can be locked using a two-point locking system . This protects your goods from theft, water and dirt. You can easily lock and unlock your 6 manually using the lock and key provided. The loading area cover is raised . Installation without drilling (with: loading area tray with a gap to the rear wall or loading area with rubber stoppers) enables the loading area cover to be assembled and disassembled quickly and cleanly without leaving any holes to drill. We make no compromises when it comes to strength and safety. It will take you approximately 75 minutes to install the cover on your DFM Rich 6. Don't worry about scratches. The Retrax - ONEMX cargo cover from NOVISauto is scratch-resistant . Enjoy the top condition of our cover for a long time without major signs of wear. Equip your DFM Rich 6 double cab with a special, UV-resistant RETRAX BY REALTRUCK Retrax - ONEMX cargo cover. This increases the lifespan of the cover - it is protected from the sun and fading. The cargo cover for your 6 double cab is lockable . Protection from prying eyes and thieves! In summary, the points " Load capacity: crossbars, unique load capacity and extreme stress " reflect the case for which the Retrax - ONEMX load compartment cover from NOVISauto is particularly suitable for your DFM Rich 6 double cab (Doublecab) from 2020+. Spiral track system for easy rolling up and down, no torsion spring, stable 2 and 5 cm double-wall aluminum slats : these are the special features of the load compartment cover. The Retrax - ONEMX load compartment cover can withstand 220 kg + crossbars: additional load 1. You must lay a water drain.

NOVISauto sport bar roll bar 2.0 Black Edition for your EU pickup (Ford Ranger 2012+, Nissan Navara 2016+, Renault Alaskan, Mercedes X-Class, Isuzu D-Max 2012+/2020+, Toyota Hilux) Give your pickup style and a massive appearance with the roll bar sport bar 2.0 in matt black design. The roll bar sport bar 2.0 does not block your 3.  Brake light - It remains visible for everyone. This universal version was developed for the entire range of common pickups in Germany. Make your pickup unique with this roll bar. The following vehicles can be equipped with the roll bar: Ford Ranger 2012+ Nissan Navara NP300 2016+ Isuzu Dmax 2012- 2020 / 2020+ Renault Alaskan 2017+ Mercedes X Class 2018-2020 Toyota Hilux 2016+ /2021+ The roll bar 2.0  is compatible with most retractable or roll-up tonneau covers  and various covers for folding.  The fixed standard version of the roll bar can be equipped with lighting panels including a variety of individual lights and LED strips up to a length of  101 cm (40 inches) can be equipped. Alternatively, an electrically operated holder allows the lights to be lowered using a switch when not in use. The sports hanger 2.0 is made of steel, dimensionally stable, unbreakable and resilient. You get the best quality in terms of workmanship and design. The matt black powder coating of the roll bar protects the material and ensures a coordinated look. The delivery includes assembly kit and installation instructions, the assembly time is about 2 hours. Note: Drilling holes on your pickup are required for assembly if you want to combine certain load compartment covers. We recommend the use of rivet nuts in this case. On vehicles without tonneau covers, the bracket can be installed using convenient mounting clips.

Equip your pickup truck of any brand with an Elevate Rack crossbar from NOVISauto. Expand your storage space with accessories from the storage and transport solutions section. Our accessories adapt seamlessly to your vehicle. The assembly kit and installation instructions are included. If required, we can carry out the professional installation of the accessories ourselves. Our employees are technically skilled, professionally competent and practically experienced. Your NOVISauto accessories at a glance: For all brands of all years NOVISauto accessories manufactured by Realt Truck Truxedo Can be combined with load compartment covers with rail system or T-slot system More space, more joy - Elevate Rack crossbar system is an ideal storage and transport solution The Elevate Rack is a unique solution for your pickup truck. Expand your cargo space with raised crossbars at cab height. This means no cargo space is lost on the bed. On the contrary - new chances and opportunities arise. More cargo space, more room. We offer various accessories to optimise the loading options. Choose between a roof basket, kayak holder, load securing and lashing clamps. Our unique solution can be combined with load area covers. So don’t hesitate and use this unique product!

Der vielseitige Offroad - Ladeflächenaufbau für Ihren europäischen Pickup!Unser Offroad - Profi - Rack für alle gängigen europäischen Pickups (Ford Ranger, Toyota Hilux, VW Amarok, Isuzu D-Max, Mitsubishi L200, Maxus T60 / T90, Nissan Navara) ist eine vielseitige Platform für alle Anwendungen von Gewerbe bis Freizeit. Verwandeln Sie Ihre Ladefläche Ihres Pickups zu einer Multifunktionsplattform mit unendlichen Anwendungsmöglichkeiten.Der Ladeflächenträger XRS für den Ford Ranger und Toyota Hilux benutzt die bewährte 4-CORE Technologie. Diese erlaubt es, Schrauben oder Nutensteine auf jeder Seite der Trägerschiene zu befestigen - so kann fast jedes Zubehörteil am Ladeflächenträger XRS Rack befestigt werden.Der robuste Ladeflächenaufbau Modell XRS für Pickups wie den Ford Ranger und Toyota Hilux besticht durch folgende Eigenschaften: Kombination der Materialien Stahl und Aluminium - besonders stabil bei vergleichsweise geringem GewichtTrägerkonstruktion aus Stahl / Befestigungselemente und Querträger aus Aluminiumträgern mit 4-CORE Technologie Belastbar bis 270kg statisch - 135kg Offroad - somit ideal geeignet für Dachzelte und Camping Ausstattung einfache Montage ohne Bohren - Klemmbefestigung mattschwarze Oberflächenbeschichtung Reichlich Quertäger zur Befestigung von ZubehörGroße Anzahl von Befestigungslöchern für Zubehör und Licher an der TrägerkonstruktionMultifunktionale Befestigungsplatte im Set enthalten (1x) - zur Befestigung von Ausrüstung, Werkzeug, Zubehör, Wassertanks uvm. - kann in jeder Position entlang der Querträger angeschraubt werden.Ausstattungen des XRS Ford Ranger / Toyota Hilux / Isuzu D-Max Rack wird Ihnen im Zubehörbereich weiter unten angezeigt:Zusätzliche XRS Befestigungsplatten (montierbar an allen 3 Außenseiten sowie Innenseiten)Abklappbare und verriegelbare XRS Arbeitsplattform (inklusive extra Befestigungsplatte an der Außenseite - verdoppelt die Staumöglichkeiten und schützt innenliegendes Transportgut)XRS Haltegriffe / Klampen zum Einstieg oder Befestigung von SpanngurtenXRS Bodenplatten für Dach (erlaubt auch Befestigung von kleinen Gegenständen, die sonst durch die Querträger fallen würden)XRS Halter für Camping - KlapptischeXRS Kit zur Erweiterung der Dachfläche (Überhang - Kit für die Kabine zur Befestigung von weiteren Plattformen oder langen Dachzelten)XRS Verzurrösen im Set von 4 StückXRS MarkiesenhalterungenXRS Schnellbefestigungen für DachzelteXRS zu SRM Dachplatform - Konnektoren Statten Sie Ihren Pickup mit einem hochwertigen Ladeflächenträger von NOVISauto aus. Das XRS Rack bietet die ideale Grundlage für eine vielseitige und individualisierte Nutzung. Alle Teile des Ladeflächensystems sind auf eine intensive Offroad Nutzung ausgelegt und damit für jegliche Nutzungsmöglichkeit - inklusive Gewerbeanwendung - geeignet. Der XRS Rack wird inklusive einer Befestigungsplatte, Montagekit und Anleitung geliefert. Benötigen Sie für Ihre Ausflüge eine hochwertige Plattform für Ihre Camping Ausstattung? Kein Problem!Bauen Sie Ihr Dachzelt mit den Schellbefestigungen in einigen Minuten ohne Werkzeuge auf die Ladefläche auf. Für besonders große Dachzelte sowie viel Transportgut kann das XRS Rack mit einem zusätzlichen Adapter nochmals um 140cm über die Kabine oder nach hinten verlängert werden. Die Tischgarnitur für den Naturausflug kann mit Hilfe zusätzlicher Halter direkt auf der Unterseite des Racks befestigt werden und nimmt keinen wertvollen Platz weg. Auch die Markise kann bequem an der Seite des Ladeflächenträgers befestigt werden. Die Halterung hierfür ist so geformt, dass die Markiese nicht im Weg ist.Der zusätzlich erhältliche Klapptisch bietet zweierlei Vorteile. Zunächst ist dieser so gestaltet, dass ausreichend Platz zur Befestigung von schmalen Kanistern oder Werkzeug zwischen Tisch und Rack vorhanden ist. Der Klapptisch kann verschlossen werden, um das Transportgut dahinter vor Diebstahl zu schützen. Auf der Außenseite des Klapptisches ist eine Befestigungsplatte vorhanden, um weiteres Gut daran zu befestigen. Die nutzbare Fläche ist somit verdoppelt! Gleichzeitig bietet der Tisch durch seine Aluminiumoberfläche eine Arbeits-, und Stauplattform im ausgeklapptem Zustand. Unser Angebot runden wir ab mit unserem Ersatzteilservice und einer hervorragenden Beratung.  

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-763-2400A CARRYBOY - Roof Rack Tradesman 120 x 240 cm with attachment The luggage rack can be mounted on the CSV Tradesman special body (suitable for models CSV, S560, SO, S8, S7, S6) with suitable fastening elements. - Best quality in processing and design - at an attractive price - dimensionally stable, unbreakable and resilient - easy to assemble Also available in dimensions: 120 x 190 cm - Article no. CB-763-1900A for double cabin / extra cabin The CARRYBOY roof rack in hammer finish is supplied with the appropriate holders for the desired hardtop / box body. If your hardtop already has roof rails, we recommend sealing the existing holes in advance. The holders for the roof load system have different attachment points that have to be created on site on the hard top / box body. CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.

CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material:   Materials from the outside:   Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays)   Material from inside:   190 g/sqm rip-stop polyester with PU 2000mm   Bottom material:          210 Denier Oxford Nylon with PU 2000mm Interior:   rust-free aluminum struts ensure structure and comfortable lying   6 cm foam mattress can be removed and cleaned    6 large windows with insect screens   2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size:   Unfolded & erected:           1,340 x 2,165 x 1,343mm   folded:             1,340 x 2,165 x 300mm   Weight:                               56 kg (together with ladder)    

CARRYBOY - XXL storage box / transport box Jumbo 735 - front opening for sport and business  -  for all pickups - Lid can be locked in the middle with a rotary lock - 2 keys are included - Rain seal - Paintwork in silver metallic / matt black / plain black - Chrome trim - Gas pressure shock absorber - Interior lining using robust dark gray woven fabric, floor rubber mat - Includes assembly set for attaching the storage box to the front tail lift - assembly description - Storage space approx. 0.40 - 0.45 cubic meters - Dimensions according to the attached figure (L x W x H )