NOVISAuto running boards S50W-VWAD

NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene  

Our TAILGATEMAT is the perfect addition to a standard tub. No more awkward kneeling on the hard tub - no more dull rippled appearance like a standard tub. You are making the right choice with the tailgate mat for your VW Amarok double cab, model year 2010-2020. The TAILGATE MAT for the Amarok is installed in minutes. Thanks to the Velcro fastener, the tailgate mat can be removed and installed in a very short time. The padded anti-slip mat for the tailgate of the Volkswagen Amarok pickup is made from the same material as a "normal" standard tub. The load compartment mat is therefore just as easy to care for, robust and practical - thanks to its unique advantages it is even more practical than the standard liner. Perfectly adapted to your pickup truck, the BEDMAT is resistant to a wide range of acids and loads and is made from a single piece. The BEDMAT for your Amarok double cab 2010-2020 can also be combined with a "standard" tub. Ideally suited if you often have to climb onto the hold. Your knees will thank you for the comfortable surface and additional padding.

NOVISauto - edge protection for the pickup tailgate of your VW Amarok 2010-2020 Effectively and inexpensively protect the scratch-prone upper edge of the tailgate of your VW Amarok built between 2010 and 2020! The NOVISAuto protective strip for the VW Amarok tailgate offers long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in loading space liner without edge protection or if the loading space is protected with a coating - because the edges of the loading area are still unprotected with both systems! The protective cap for the VW Amarok tailgate was developed for lasting protection against scratches, dents and dents. A close fit with smooth finished edges and durable plastic material make our VW Amarok Edge trims an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.

NOVISauto - edge protection for the pick-up loading sill on the right and left of your VW Amarok 2010-2020 Effectively and inexpensively protect the scratch-prone upper edge of the loading area of your VW Amarok built between 2010 and 2020! The NOVISAuto protective strips for the VW Amarok sides offer long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in loading space liner without edge protection or if the loading space is protected with a coating - because the edges of the loading area are still unprotected with both systems! The protective cap for the VW Amarok side loading sills was developed for permanent protection against scratches, dents and dents. A close fit with smooth finished edges and durable plastic material make our VW Amarok Edge trims an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.

NOVISauto - SwingCase tool box for VW Amarok 2010-2020 Ultra-practical box for tools, sporting goods and many small parts You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing"  is more needed! NOVISauto, the market leader in selling popular Volkswagen Amarok accessories, builds these versatile storage boxes from impact-resistant ABS hard plastic for your convenience - strong enough for a long Amarok truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Volkswagen Amarok. - The purchase of two SwingCases for both sides of your VW Amarok platform wall is the best choice - space-saving, absolutely tight and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts!  SwingCase can be parked lying down or standing as usual. To save space, fix the SwingCase tool box to the side of the Volkswagen Amarok between the platform door and the wheel housing. SwingCase for your VW Amarok truck on the passenger side can be swung out , and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. This means that removing the VW Amarok is no longer possible. The tool box (tool box) and storage box is an essential VW Amarok accessory for every tradesman or hobby - do-it-yourselfers. The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Volkswagen Amarok pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.

The NOVISauto loading space extension BEDXTENDER helps you get the most out of your loading space. The silver or black coated luggage compartment extension for your Volkswagen Amarok from 2010-2020 model year consists of robust aluminum struts, so that every load is optimally held. The cargo area can be extended in the length of your tailgate with the BEDXTENDER V-shaped cargo area extension, creating more storage space for your cargo. Can be combined with various load compartment covers. The installation on your VW Amarok year 2010-2020 is done by several screws and can be done by laymen. Assembly instructions and assembly kit are included.

Trunk liner for Volkswagen Amarok Double Cab 2010-2020 dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform Including screw points for original lashing rails on the sides of the loading area ideally suited for an exceptionally long service life stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects the paintwork at low cost Made in the USA - no re-import from the Far East. Accesories Tailgate protection with edge protection included assembly description with the necessary mounting accessories

NOVISAuto running boards type NO-S50S made of high-quality anodized aluminum for Volkswagen Amarok double cab from year of construction 2010 - in black powder coating Vehicle equipment with a double advantage: Treat your VW Amarok double cab to a new "look" that will make it easier for you to get into the vehicle. Running boards in a set for driver and passenger side Made of high quality aluminum, anodized 20 microns Running boards are powder coated black with black end caps Perfect for vehicles with dark body colors Mounting kit and description are included in the delivery

NOVISAuto running boards type NO-STD made of high-quality, anodized aluminum for Volkswagen Amarok double cab from year of construction 2010 Vehicle equipment with a double benefit: Treat your Amarok double cab to a new "look" that will also make it easier for you to get into the vehicle. Running boards in a set for driver and passenger side Made of high quality aluminum, anodized 20 microns Left in aluminum color with black end caps Sporty design Anti-slip inserts for a secure footing Mounting kit and description are included in the delivery

NOVISAuto aluminum running boards type NO-S50W made of high-quality, anodized aluminum for Volkswagen Amarok double cab from year of construction 2010 Vehicle equipment with a double advantage: Treat your VW Amarok double cab pick-up to a new "look" that will also make it easier for you to get into the vehicle. Running boards in a set for driver and passenger side Made of high quality aluminum, anodized 20 microns black powder-coated aluminum running boards for the Amarok, with white end caps perfect contrast to vehicles with light body colors easy installation with bracket mounting Mounting kit and description are included in the delivery

NOVISAuto running boards type NO-S50A made of high quality aluminum for Volkswagen Amarok double cab from year of construction 2010 - available in 4 different colors Vehicle equipment with a double advantage: Treat your vehicle to a new "look" that will make it easier for you to get into the vehicle. Running boards in a set for the driver and passenger side for the VW Amarok double cab Made of high quality aluminum, anodized 20 microns Colour: original aluminum with black end caps Mounting kit and description are included in the delivery

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

NOVISauto - lockable cassettes with stereo compartment (model Stereo DELUXE) for car center consoles The lockable Autosafe cassette for installation in the center console of your pickup or SUV offers security for your valuables. In addition to the lockable security compartment "SERIES 2", the "Deluxe" car safe cassette for the center console offers an additional compartment for installing a CD player. Security : The cassettes offer a safe and secure place for valuables that you want to have close at hand while driving.  The stable cassette is made of 1.5 mm thick steel with a tight-fitting lid. Locking is via the US-patented, burglar-proof locking system  Pry-Guard with double-bit key with 10 tumblers.  The unique design includes an exclusive hinge system. Grade 8 mounting hardware is included. The Stereo Deluxe consoles are equipped with patented push-button locking system and Pry-Guard II locking system, which ensure lasting security. Furnishing: The outside of the cassette has a durable black powder coating with a textured finish. Choose the color to match the interior of your vehicle: Black beige brown The bottom of the cassette is covered with a rubber mat, the cup holder can accommodate different formats thanks to the size of the openings, flexible rubber mounts are used to minimize vibrations while driving. Comfort: The padded and vinyl covered armrests are for your personal comfort. That  Patented push button locking system allows the lid to be closed without locking. Useful details such as a practical storage compartment and a removable small parts tray under the lid  complete the offer. Assembly: Supplied with high quality mounting kit and more detailed  installation instructions. Note: Standard hardware will require holes to be drilled and secured with the fasteners provided. Depending on your vehicle's center console design, additional hardware may be required.  

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

NOVISauto - load compartment liner, non-slip model Bedrug BRVAD10 for Volkswagen Amarok Double Cab 2010-2020 Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use continuous fabric-like tub between the loading area and tailgate. Anti-slip surface for safe transport Protection of the tailgate hinges from granular loads and dust from above - reduces wear Additional foam protects against impacts on the loading area, e.g. from heavy goods to be transported The most innovative and unique load compartment liner. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stress from gravel to battery acid. Your animals will also thank you - the soft surface not only invites dogs and cats to snooze, but the carpet is also well suited for camping holidays. In addition, you not only protect the loading area from scratches as with ordinary tubs, but also benefit from improved impact resistance thanks to the thick foam of the Bedrug.  

Equip your pickup truck of any brand with an Elevate Rack crossbar from NOVISauto. Expand your storage space with accessories from the storage and transport solutions section. Our accessories adapt seamlessly to your vehicle. The assembly kit and installation instructions are included. If required, we can carry out the professional installation of the accessories ourselves. Our employees are technically skilled, professionally competent and practically experienced. Your NOVISauto accessories at a glance: For all brands of all years NOVISauto accessories manufactured by Realt Truck Truxedo Can be combined with load compartment covers with rail system or T-slot system More space, more joy - Elevate Rack crossbar system is an ideal storage and transport solution The Elevate Rack is a unique solution for your pickup truck. Expand your cargo space with raised crossbars at cab height. This means no cargo space is lost on the bed. On the contrary - new chances and opportunities arise. More cargo space, more room. We offer various accessories to optimise the loading options. Choose between a roof basket, kayak holder, load securing and lashing clamps. Our unique solution can be combined with load area covers. So don’t hesitate and use this unique product!

NOVISauto sport bar roll bar 2.0 Black Edition for your EU pickup (Ford Ranger 2012+, Nissan Navara 2016+, Renault Alaskan, Mercedes X-Class, Isuzu D-Max 2012+/2020+, Toyota Hilux) Give your pickup style and a massive appearance with the roll bar sport bar 2.0 in matt black design. The roll bar sport bar 2.0 does not block your 3.  Brake light - It remains visible for everyone. This universal version was developed for the entire range of common pickups in Germany. Make your pickup unique with this roll bar. The following vehicles can be equipped with the roll bar: Ford Ranger 2012+ Nissan Navara NP300 2016+ Isuzu Dmax 2012- 2020 / 2020+ Renault Alaskan 2017+ Mercedes X Class 2018-2020 Toyota Hilux 2016+ /2021+ The roll bar 2.0  is compatible with most retractable or roll-up tonneau covers  and various covers for folding.  The fixed standard version of the roll bar can be equipped with lighting panels including a variety of individual lights and LED strips up to a length of  101 cm (40 inches) can be equipped. Alternatively, an electrically operated holder allows the lights to be lowered using a switch when not in use. The sports hanger 2.0 is made of steel, dimensionally stable, unbreakable and resilient. You get the best quality in terms of workmanship and design. The matt black powder coating of the roll bar protects the material and ensures a coordinated look. The delivery includes assembly kit and installation instructions, the assembly time is about 2 hours. Note: Drilling holes on your pickup are required for assembly if you want to combine certain load compartment covers. We recommend the use of rivet nuts in this case. On vehicles without tonneau covers, the bracket can be installed using convenient mounting clips.

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material:   Materials from the outside:   Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays)   Material from inside:   190 g/sqm rip-stop polyester with PU 2000mm   Bottom material:          210 Denier Oxford Nylon with PU 2000mm Interior:   rust-free aluminum struts ensure structure and comfortable lying   6 cm foam mattress can be removed and cleaned    6 large windows with insect screens   2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size:   Unfolded & erected:           1,340 x 2,165 x 1,343mm   folded:             1,340 x 2,165 x 300mm   Weight:                               56 kg (together with ladder)    

Novisauto Pathfinder-1 roof tent The Novisauto roof tent for every pickup or at least mid-range SUV is one of the first innovative electrically controllable roof tents. You can straighten it up and down with a simple push of a button, alternatively you can also do it by hand. The tent is set up on the vehicle using clamps on cross members. Comfort : Self-erecting by remote control within 60 seconds Power supply via socket of the vehicle (3m cable) spacious interior with enough space for 2 people Reliable protection against wind and rain with extendable telescopic aluminum ladder - loadable up to 150kg with 6cm foam mattress. The cotton cover can be removed and washed. 2 extra hanging pockets for storing shoes, for example double fly screens in front of the windows and the entrance Tent size :   unfolded & erected (inside):      1,200(W) x 2,000(L) x 1,100(H) mm   Weight:                                       56 kg (together with ladder)   Material :   Material outside:   Oxford polyester with silver coating and UPF50+ *   Materials inside:   190 g/sqm ripstop polyester with 2000 mm water column   Bottom material:   210 Denier Oxford Nylon with 2000mm hydrostatic head Interior :   Stainless steel struts provide structure.   6 cm foam mattress can be removed with cover   6 windows with insect screen and privacy screen   2 additional shoe bags  

Der vielseitige Offroad - Ladeflächenaufbau für Ihren europäischen Pickup!Unser Offroad - Profi - Rack für alle gängigen europäischen Pickups (Ford Ranger, Toyota Hilux, VW Amarok, Isuzu D-Max, Mitsubishi L200, Maxus T60 / T90, Nissan Navara) ist eine vielseitige Platform für alle Anwendungen von Gewerbe bis Freizeit. Verwandeln Sie Ihre Ladefläche Ihres Pickups zu einer Multifunktionsplattform mit unendlichen Anwendungsmöglichkeiten.Der Ladeflächenträger XRS für den Ford Ranger und Toyota Hilux benutzt die bewährte 4-CORE Technologie. Diese erlaubt es, Schrauben oder Nutensteine auf jeder Seite der Trägerschiene zu befestigen - so kann fast jedes Zubehörteil am Ladeflächenträger XRS Rack befestigt werden.Der robuste Ladeflächenaufbau Modell XRS für Pickups wie den Ford Ranger und Toyota Hilux besticht durch folgende Eigenschaften: Kombination der Materialien Stahl und Aluminium - besonders stabil bei vergleichsweise geringem GewichtTrägerkonstruktion aus Stahl / Befestigungselemente und Querträger aus Aluminiumträgern mit 4-CORE Technologie Belastbar bis 270kg statisch - 135kg Offroad - somit ideal geeignet für Dachzelte und Camping Ausstattung einfache Montage ohne Bohren - Klemmbefestigung mattschwarze Oberflächenbeschichtung Reichlich Quertäger zur Befestigung von ZubehörGroße Anzahl von Befestigungslöchern für Zubehör und Licher an der TrägerkonstruktionMultifunktionale Befestigungsplatte im Set enthalten (1x) - zur Befestigung von Ausrüstung, Werkzeug, Zubehör, Wassertanks uvm. - kann in jeder Position entlang der Querträger angeschraubt werden.Ausstattungen des XRS Ford Ranger / Toyota Hilux / Isuzu D-Max Rack wird Ihnen im Zubehörbereich weiter unten angezeigt:Zusätzliche XRS Befestigungsplatten (montierbar an allen 3 Außenseiten sowie Innenseiten)Abklappbare und verriegelbare XRS Arbeitsplattform (inklusive extra Befestigungsplatte an der Außenseite - verdoppelt die Staumöglichkeiten und schützt innenliegendes Transportgut)XRS Haltegriffe / Klampen zum Einstieg oder Befestigung von SpanngurtenXRS Bodenplatten für Dach (erlaubt auch Befestigung von kleinen Gegenständen, die sonst durch die Querträger fallen würden)XRS Halter für Camping - KlapptischeXRS Kit zur Erweiterung der Dachfläche (Überhang - Kit für die Kabine zur Befestigung von weiteren Plattformen oder langen Dachzelten)XRS Verzurrösen im Set von 4 StückXRS MarkiesenhalterungenXRS Schnellbefestigungen für DachzelteXRS zu SRM Dachplatform - Konnektoren Statten Sie Ihren Pickup mit einem hochwertigen Ladeflächenträger von NOVISauto aus. Das XRS Rack bietet die ideale Grundlage für eine vielseitige und individualisierte Nutzung. Alle Teile des Ladeflächensystems sind auf eine intensive Offroad Nutzung ausgelegt und damit für jegliche Nutzungsmöglichkeit - inklusive Gewerbeanwendung - geeignet. Der XRS Rack wird inklusive einer Befestigungsplatte, Montagekit und Anleitung geliefert. Benötigen Sie für Ihre Ausflüge eine hochwertige Plattform für Ihre Camping Ausstattung? Kein Problem!Bauen Sie Ihr Dachzelt mit den Schellbefestigungen in einigen Minuten ohne Werkzeuge auf die Ladefläche auf. Für besonders große Dachzelte sowie viel Transportgut kann das XRS Rack mit einem zusätzlichen Adapter nochmals um 140cm über die Kabine oder nach hinten verlängert werden. Die Tischgarnitur für den Naturausflug kann mit Hilfe zusätzlicher Halter direkt auf der Unterseite des Racks befestigt werden und nimmt keinen wertvollen Platz weg. Auch die Markise kann bequem an der Seite des Ladeflächenträgers befestigt werden. Die Halterung hierfür ist so geformt, dass die Markiese nicht im Weg ist.Der zusätzlich erhältliche Klapptisch bietet zweierlei Vorteile. Zunächst ist dieser so gestaltet, dass ausreichend Platz zur Befestigung von schmalen Kanistern oder Werkzeug zwischen Tisch und Rack vorhanden ist. Der Klapptisch kann verschlossen werden, um das Transportgut dahinter vor Diebstahl zu schützen. Auf der Außenseite des Klapptisches ist eine Befestigungsplatte vorhanden, um weiteres Gut daran zu befestigen. Die nutzbare Fläche ist somit verdoppelt! Gleichzeitig bietet der Tisch durch seine Aluminiumoberfläche eine Arbeits-, und Stauplattform im ausgeklapptem Zustand. Unser Angebot runden wir ab mit unserem Ersatzteilservice und einer hervorragenden Beratung.  

Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame  for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p