Carryboy Soft Lid model 743-TVD

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

NOVISauto lashing clamps "CARGO CLEATS" - an ingeniously simple lashing system for your pickup loading box  -  installed in minutes ! the optimal alternative for backup  of your transported goods!  No drilling is required to attach the cleats anywhere on the top edge of the cargo box side walls. No damage to paint or sheet metal during installation and under load. The cleats are made of plastic-coated glass, so they are extremely durable and will not rust. Loads of up to around 200 kg are possible and can also be used for most of our luggage compartment covers. Additional CARGO CLEADS are required for larger loads:  always use more CARGO CLEATS to secure your cargo than necessary! - - Sold in pairs, information on attachment and application options, such as tips for knotting, for optimal loading is included. To note:  CARGO CLEATS cannot be used with load compartment tubs that are over the edge (overrail tubs) -  unless the tub is cut out at the relevant attachment points. CARGO CLEATS is not suitable for plastic-coated cargo boxes.    

NOVISauto - pre-compressed, permanently elastic joint sealing tape  for sealing the joint between the hard top or load compartment cover and the vehicle load box. Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover  glued on, previously trimmed a little at the ends.  Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps. A detailed assembly description is enclosed with the delivery.

NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene  

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Toyota Hilux 2016+ for Toyota Hilux 2016+ / 2021+ Invincible Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate

Rüsten Sie Ihren Pickup Truck verschiedener Marken Doppelkabine, Einzelkabine oder Extrakabine Baujahr(e) 2016-24 mit einer hochwertigen Motorhaubenöffner 106 von CARRYBOY aus. Mehr Komfort. Bessere Bedienung. Ihr Pickup – noch benutzerfreundlicher. Mit Zubehör aus der Rubrik Komfort & Benutzerfreundlichkeit. Motorhaubenöffner 106 erhöht die Benutzerfreundlichkeit Ihres Fahrzeugs und integriert sich reibungslos an Ihre Bedürfnisse. Im Lieferumfang enthalten sind ein maßgeschneidertes Montagekit und eine detaillierte Einbauanleitung. Zusätzlich unterstützen unsere anschaulichen YouTube-Videos eine einfache und reibungslose Installation. Und wenn’s doch mal hakt – unser erfahrenes Team ist jederzeit für Sie erreichbar. Auf Wunsch übernehmen unsere technisch versierten und erfahrenen Fachkräfte die fachgerechte Montage Ihres Zubehörs. Somit ist unser Zubehör Modell Motorhaubenöffner 106 das stärkste Model für Ihren Pickup Doppelkabine, Einzelkabine oder Extrakabine Baujahr 2016 - 2024. Unsere CARRYBOY Zubehör - Auf einen Blick - die gesamte Ausstattung: Kompatibilität: Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara, Toyota Hilux Doppelkabine (Doublecab), Einzelkabine (Singlecab), Extrakabine/1, 5-Kabine (Kingcab) Baujahr 2016 - 2024 Qualitätsprodukt: CARRYBOY Zubehör Anwendungsfall: Zubehör geeignet für Komfort & Benutzerfreundlichkeit Montageart: schrauben ungefähre Montagezeit: 15 min besonderes Merkmal: einfaches Öffnen und extrem kurze Einbauzeit besonderes geeignet für: bequeme Nutzung, einfache Anwendung und täglicher Gebrauch Befestigungsort: Motorhaube** Stauraum: ca. 0,5 m³ Unser Service an Sie - vor dem Kauf, als auch nach dem Kauf Unsere Dienste sind auf Ihre Anforderungen zugeschnitten. Ob vor oder nach dem Kauf – unser umfassender Service bietet Ihnen die Unterstützung, die Sie benötigen. Bei Fragen oder Zweifeln stehen wir Ihnen telefonisch oder via E-Mail zur Verfügung. Unser qualifiziertes Team steht Ihnen mit fundiertem Fachwissen, einer freundlichen Haltung und einem Service, der speziell auf Ihre Anforderungen abgestimmt ist, beratend zur Seite. Dank unserer mehr als 16-jährigen Praxiserfahrung gewährleisten wir Zuverlässigkeit. Unser fachkundiges Personal bietet Ihnen dank seiner umfassenden Expertise und langjährigen aktiv in der Branche erworbenen Erfahrungen stets erstklassigen Service. Praktisch. Durchdacht. Langlebig. Eine nachhaltige Produktgestaltung ist uns wichtig. Die Verwendung von hochwertigen Materialien, Rohstoffen und Teilen ermöglicht eine lange Lebens- und Nutzungsdauer unseres Zubehörs. Nachhaltigkeit wird durch eine lebenslange Nutzung und damit das Sparen von Ressourcen zur Neuherstellung erreicht. Mehr Komfort und erhöhte Benutzerfreundlichkeit durch CARRYBOY Motorhaubenöffner 106 Die Montage des Carryboy Motorhaubenöffner CB-106 erfolgt auf der Motorhaube. Die ungefähre Montagezeit beträgt 15 min auf Ihren Pickup Truck. Eine Montage mit schrauben ermöglicht eine bessere Standfestigkeit des Zubehörs. Durch schrauben sitzt das Zubehör besonders sicher an. Einfaches Öffnen und extrem kurze Einbauzeit: Das sind die besonderen Merkmale des Zubehörs. Zusammenfassend spiegeln die Punkte "Bequeme Nutzung, einfache Anwendung und täglicher Gebrauch" den Fall wieder, für welcher das Zubehör Motorhaubenöffner 106 von CARRYBOY für Ihren Pickup Truck Doppelkabine (Doublecab), Einzelkabine (Singlecab), Extrakabine/1 oder 5-Kabine (Kingcab) 2016 - 2024 besonders geeignet ist.

NOVISauto – B-Light / B-Light  is the ultra-bright lighting for your pick-up loading area made of 8 brightly lit LED units, each with 6 LED bulbs. B-Light fits all pickup trucks and models - B-Light brightly illuminates the entire cargo area of your pickup - There is only one switch for the whole light system. B light is suitable for all pickups with any cargo area covers or hardtop.  To protect against slipping loads, B-Light should be mounted under the U-rail on the side.

Saddlebag -  Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away  in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.   

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

NOVISauto - bed mat model BedMat in universal size for all common and non-common pickup models (also for special editions, extended vehicles) The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area. The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush. The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping. The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas. It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery. Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ). universally applicable for all models Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.  

NOVISauto – SwingCase for the Toyota Hilux Revo 2016+ / Invincible 2021+ pickup The ultra-practical box for tools, sporting goods and lots of small parts! You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing"  is more needed! NOVISauto, the leader in selling popular Toyota Hilux 2016+ / Toyota Invincible accessories, builds these versatile storage boxes out of high-impact ABS hard plastic for your convenience - strong enough for a long Hilux truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Toyota Hilux. - Buying two SwingCases for both sides of your Hilux platform wall is the best choice - space-saving, absolutely tight and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts!  SwingCase can be parked lying down or standing as usual. On the Toyota Hilux 2016+ / Toyota Hilux Invincible 2021+, you can fix the SwingCase tool box to the side between the platform flap and the wheel housing to save space. SwingCase for your Toyota Hilux Truck can be swung out , and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. The tool box (tool box) and storage box is an essential Toyota Hilux accessory for every tradesman or hobby - do-it-yourselfers. The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Volkswagen Toyota Hilux pick-ups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.

Load compartment tub with all-round edge protection for Toyota Hilux Revo double cab 2016+ / 2021+ Invincible dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform Including screw points for original lashing rails on the sides of the loading area ideally suited for an exceptionally long service life stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects the paintwork at low cost Made in the USA - no re-import from the Far East. Accesories Tailgate protection lower edge included assembly description with the necessary mounting accessories

Load compartment liner lower edge for Toyota Hilux Revo double cab 2016+ / 2021+ Invincible dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform Including screw points for original lashing rails on the sides of the loading area ideally suited for an exceptionally long service life stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects the paintwork at low cost Made in the USA - no re-import from the Far East. Accesories Tailgate protection lower edge included assembly description with the necessary mounting accessories

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

NOVISauto - bed rug model BedRug BRTHD16 for Toyota Hilux Double Cab 2016+ / 2021+ dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport Protection of the tailgate hinges from granular loads and dust from above - reduces wear   The most innovative and unique tonneau liner: with the look and comfort of a carpet, an ultra-tough product made from 100% polypropylene. Not only is your truck bed protected against impact and damage, but the bed liner also withstands the abuse of gravel and battery acid.  

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material:   Materials from the outside:   Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays)   Material from inside:   190 g/sqm rip-stop polyester with PU 2000mm   Bottom material:          210 Denier Oxford Nylon with PU 2000mm Interior:   rust-free aluminum struts ensure structure and comfortable lying   6 cm foam mattress can be removed and cleaned    6 large windows with insect screens   2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size:   Unfolded & erected:           1,340 x 2,165 x 1,343mm   folded:             1,340 x 2,165 x 300mm   Weight:                               56 kg (together with ladder)    

Novisauto Pathfinder-1 roof tent The Novisauto roof tent for every pickup or at least mid-range SUV is one of the first innovative electrically controllable roof tents. You can straighten it up and down with a simple push of a button, alternatively you can also do it by hand. The tent is set up on the vehicle using clamps on cross members. Comfort : Self-erecting by remote control within 60 seconds Power supply via socket of the vehicle (3m cable) spacious interior with enough space for 2 people Reliable protection against wind and rain with extendable telescopic aluminum ladder - loadable up to 150kg with 6cm foam mattress. The cotton cover can be removed and washed. 2 extra hanging pockets for storing shoes, for example double fly screens in front of the windows and the entrance Tent size :   unfolded & erected (inside):      1,200(W) x 2,000(L) x 1,100(H) mm   Weight:                                       56 kg (together with ladder)   Material :   Material outside:   Oxford polyester with silver coating and UPF50+ *   Materials inside:   190 g/sqm ripstop polyester with 2000 mm water column   Bottom material:   210 Denier Oxford Nylon with 2000mm hydrostatic head Interior :   Stainless steel struts provide structure.   6 cm foam mattress can be removed with cover   6 windows with insect screen and privacy screen   2 additional shoe bags  

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Der vielseitige Offroad - Ladeflächenaufbau für Ihren europäischen Pickup!Unser Offroad - Profi - Rack für alle gängigen europäischen Pickups (Ford Ranger, Toyota Hilux, VW Amarok, Isuzu D-Max, Mitsubishi L200, Maxus T90, Nissan Navara) ist eine vielseitige Platform für alle Anwendungen von Gewerbe bis Freizeit. Verwandeln Sie Ihre Ladefläche Ihres Pickups zu einer Multifunktionsplattform mit unendlichen Anwendungsmöglichkeiten.Der Ladeflächenträger XRS für den Ford Ranger und Toyota Hilux benutzt die bewährte 4-CORE Technologie. Diese erlaubt es, Schrauben oder Nutensteine auf jeder Seite der Trägerschiene zu befestigen - so kann fast jedes Zubehörteil am Ladeflächenträger XRS Rack befestigt werden.Der robuste Ladeflächenaufbau Modell XRS für Pickups wie den Ford Ranger und Toyota Hilux besticht durch folgende Eigenschaften: Kombination der Materialien Stahl und Aluminium - besonders stabil bei vergleichsweise geringem GewichtTrägerkonstruktion aus Stahl / Befestigungselemente und Querträger aus Aluminiumträgern mit 4-CORE Technologie Belastbar bis 270kg statisch - 135kg Offroad - somit ideal geeignet für Dachzelte und Camping Ausstattung einfache Montage ohne Bohren - Klemmbefestigung mattschwarze Oberflächenbeschichtung Reichlich Quertäger zur Befestigung von ZubehörGroße Anzahl von Befestigungslöchern für Zubehör und Licher an der TrägerkonstruktionMultifunktionale Befestigungsplatte im Set enthalten (1x) - zur Befestigung von Ausrüstung, Werkzeug, Zubehör, Wassertanks uvm. - kann in jeder Position entlang der Querträger angeschraubt werden.Ausstattungen des XRS Ford Ranger / Toyota Hilux / Isuzu D-Max Rack wird Ihnen im Zubehörbereich weiter unten angezeigt:Zusätzliche XRS Befestigungsplatten (montierbar an allen 3 Außenseiten sowie Innenseiten)Abklappbare und verriegelbare XRS Arbeitsplattform (inklusive extra Befestigungsplatte an der Außenseite - verdoppelt die Staumöglichkeiten und schützt innenliegendes Transportgut)XRS Haltegriffe / Klampen zum Einstieg oder Befestigung von SpanngurtenXRS Bodenplatten für Dach (erlaubt auch Befestigung von kleinen Gegenständen, die sonst durch die Querträger fallen würden)XRS Halter für Camping - KlapptischeXRS Kit zur Erweiterung der Dachfläche (Überhang - Kit für die Kabine zur Befestigung von weiteren Plattformen oder langen Dachzelten)XRS Verzurrösen im Set von 4 StückXRS MarkiesenhalterungenXRS Schnellbefestigungen für DachzelteXRS zu SRM Dachplatform - Konnektoren Statten Sie Ihren Pickup mit einem hochwertigen Ladeflächenträger von NOVISauto aus. Das XRS Rack bietet die ideale Grundlage für eine vielseitige und individualisierte Nutzung. Alle Teile des Ladeflächensystems sind auf eine intensive Offroad Nutzung ausgelegt und damit für jegliche Nutzungsmöglichkeit - inklusive Gewerbeanwendung - geeignet. Der XRS Rack wird inklusive einer Befestigungsplatte, Montagekit und Anleitung geliefert. Benötigen Sie für Ihre Ausflüge eine hochwertige Plattform für Ihre Camping Ausstattung? Kein Problem!Bauen Sie Ihr Dachzelt mit den Schellbefestigungen in einigen Minuten ohne Werkzeuge auf die Ladefläche auf. Für besonders große Dachzelte sowie viel Transportgut kann das XRS Rack mit einem zusätzlichen Adapter nochmals um 140cm über die Kabine oder nach hinten verlängert werden. Die Tischgarnitur für den Naturausflug kann mit Hilfe zusätzlicher Halter direkt auf der Unterseite des Racks befestigt werden und nimmt keinen wertvollen Platz weg. Auch die Markise kann bequem an der Seite des Ladeflächenträgers befestigt werden. Die Halterung hierfür ist so geformt, dass die Markiese nicht im Weg ist.Der zusätzlich erhältliche Klapptisch bietet zweierlei Vorteile. Zunächst ist dieser so gestaltet, dass ausreichend Platz zur Befestigung von schmalen Kanistern oder Werkzeug zwischen Tisch und Rack vorhanden ist. Der Klapptisch kann verschlossen werden, um das Transportgut dahinter vor Diebstahl zu schützen. Auf der Außenseite des Klapptisches ist eine Befestigungsplatte vorhanden, um weiteres Gut daran zu befestigen. Die nutzbare Fläche ist somit verdoppelt! Gleichzeitig bietet der Tisch durch seine Aluminiumoberfläche eine Arbeits-, und Stauplattform im ausgeklapptem Zustand. Unser Angebot runden wir ab mit unserem Ersatzteilservice und einer hervorragenden Beratung.  

Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame  for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p

The basic version of the Huckepack camping pickup structure combines everything you need to experience a short adventure. Drive to the North Sea for the weekend and listen to the sound of the waves. How about a 4 to 5 day short trip to the Black Forest and enjoy the peace and quiet while the forest and nature embrace you?  Our motto "Freedom on wheels" is our motto. Enjoy the opportunity to go anywhere. Even the basic version is generously equipped and covers all your basic needs so that nothing stands in the way of your trip. The structure can be packed and unpacked quickly and easily - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!